RE: X11 S3 installation

oc/x11... > > I was not able to find the exact docs you were talking about, but I > did > find the program that creates XF86Config and X11 seems to work > somewhat... Boy that script asked me some questions I had to dig > pretty > deep to figure out! > [Vladislav

[Q] Mesa + gcc 2.8.1 +libc6 (Linux)

Hello, I compiled Mesa with gcc 2.8.1 + the latest libc6 (that includes pthreads 0.7) on Linux. I tried make linux-386-pthreads, make linux-386-elf, make linux-elf All the sample programs core dump. The debugger cannot step through the core file. I also tried putting a printf right the main decla

[Q] XDM -- how to reconfigure

Hello, When installing debian I was suggested by the installation program to use XDM to start X windows. I now understand that I do not want that. However I can only use startx command (what I was using before the new installation) if logged in as root. I would like to use startx command to start

[Q] Xemacs -- getcw failes

Sorry if the question has been asked again But I cannot get XEmacs to start up (in X windows or without). I get something like 'getch failes return status 0'. I did look through the mailing list arch in January but did not find a clear answer on this question. The XEmacs is from hamm but compil

[Q] KDE for libc6. motif for libc6

Hello, does any one know where from I can dowload (if it exists) the latest version of KDE (I think it is Beta 3) that is compiled for libc6? Also where can I buy (inexpensively) a version of Motif 2.1 (devel and binaries) that is compiled for libc6. And will it work when the latest version of th

RE: SCSI controller

I would suggest BusLogic --- not only they are good but also they 'officially' support linux providing the drivers. Adaptec on the other hand refused (as far as I know) to recognize Linux as OS to support. Vladislav >-- >From: [EMAIL PROTECTED]:[EMAIL PROTECTED] >Sent: Wednesday, March

RE: 80 MB ram in debian system

I am also planning to add more than 64 mb to my machine. However I do not have /etc/lilo.conf. I always boot from a floppy disk (when creating a kernel I just do make bzdisk). What should I do in that case? Thanks, Vladislav >-- >From: [EMAIL PROTECTED]:[EMAIL PROTECTED] >Sent: Monday,

[Q] cp /etc/smb.conf /dev/lp0 -- does not work

Hello, after I upgraded to hamm (on Dec 19, 1997) and now latest kernel (2.1.86) -- I always have to hit Feed button to get anything out of the printer. The same printer (Okidata laser 710e) works fine for NT. Did something get changed in the settings of /dev/lp0 or may be parport device driver th

[Q] cannot print

Hello, Some how, after installing and configuring debian's hamm snop-shot of December 19's -- I cannot print. I have Okidata with HP emulation and just a simple command like cp text.file /dev/lp0 -- kind of starts the printer -- the printer displays that it is receiving data and then nothing happ

RE: Netscape 4.04.... [Read this Please!]

My netscape 4.04 is also working just fine -- I did not have to do anything at all. Just downloaded, installed using debian packages and it just works. My configuration: hamm debian as of December 19 (all libc6 + some packages that cannot live without libc5) kernel: 2.1.78 To dial up I use X-ISP

[Q] 56K US Robotics?

Hello, Would anyone know how to verify that I am connecting to Internet at 56K. I run Debian hamm + 2.1.78 kernel. I use X-ISP package to connect (it displays 31.200 connected speed). I know that when I use the same modem connecting to the same ISP only running WinNT -- it connects at 56K. I made

RE: [Q] ~/.xinitrc is not being read

debian-user@lists.debian.org >Cc:The recipient's address is unknown. >Subject: Re: [Q] ~/.xinitrc is not being read > >Hamish Moffatt <[EMAIL PROTECTED]> writes: > >> On Wed, Jan 14, 1998 at 03:05:04PM -0500, Vladislav Papayan x285 wrote: >> > I use now

[Q] ~/.xinitrc is not being read

Hello, I use now xdm to login into the system -- however it seems like my ~/.xinitrc is being ignored. I specify there xsetroot, fvwm2 &, and other stuff -- but nothing seems to be picked up. Is .xinitrc valid when using xdm -- or do I have to use something else now? Thanks, Vladislav -- TO

{Q} Several Questions on X

Hello, I have debian-hamm as of Dec. 19, (everything is libc6) installed. I cannot seem to get X to work when I am not root. It tells me that only root can run the server. I thought that there might be something wrong with permissions, so I reinstalled x-server-s3v. It installed OK with one error

FW: [Q]Getting Error 111 when starting X srv

This mail was returned somehow, so I am resending it. >-- >From: Vladislav Papayan x285 >Sent: Saturday, January 10, 1998 4:00 PM >To:debian-user@lists.debian.org >Subject: [Q]Getting Error 111 when starting X srv > >Hello, >during debian install

[Q]Getting Error 111 when starting X srv

Hello, during debian installation I was prompted to run XF86Setup, when configured my card and display I hit the 'Done' button to start the server but I was getting X cannot connect to socket error (-111) What can it be? I had debian on my computer installed before and X run just fine (I also co

FW: [Q] How to install everything libc6

I am sorry, I am forwading the mail again, but I had a problem with my mail that all the messages that were not directed to debian-alpha were deleted. So if there were any answeres to my question -- I did not see them. >-- >From: Vladislav Papayan x285 >Sent: Friday, January

[Q] How to install everything libc6

Hello, On December 19 I downloaded (to a CD) everything in Hamm/binary-i386 And created the floppy disks later on (from the same place). When I installed the base installation it put binaries compiled with libc5. When I was prompted with DSELECT screen I select an option to update the existing pac

[Q] multi-disk

Hello, I have root partition on /dev/hda5 /usr and /home directories on /dev/hdb1 I have another Harddisk I would like to put it such that it increases the space for my /usr and /home I compiled my kernel to include linear and Raid personalities for MD. My question is: is it doable to mount my ne

RE: [Q] defrag

32 AM >To: Vladislav Papayan x285; debian-user@lists.debian.org >Subject: Re: [Q] defrag > > >-Original Message- >From: Vladislav Papayan x285 <[EMAIL PROTECTED]> >To: 'debian-user@lists.debian.org' >Date: Thursday, November 20, 1997 10:18 AM >

[Q] defrag

Hello, I am trying to use defrag /dev/hdb1 and get something like "bad magic number" my HD (/dev/hdb1) is a 4.3 GB Maxtor. the number of cylinders is greated than 1024. On the bios level the HD is setup for LBA mode (it is set to automatic by I think it resolves it LBA). Why would defrag have

[Q] half-duplex mode with EEPRO100

Hello, I am using eepro100.o module for my Intel EExpressPro 100B card. My current kernel version is 2.1.59. No matter what kernel I try to use I always see that when the module gets loaded it tell that it operates in half-duplex mode. I ran out of ideas. Does any one know how to change it to fu

[Q] Cannot Print to Samba printer

Hi I am giving up. I cannot print to my Samba printer (attached to Linux) and I was able to do it before. I do not remember what I have done first upgraded to glibc or recompiled samba 10 times. It is not my windows client problem -- because when I use smbclient '\\myhost\printer_name' -P on th

RE: [Q] Cyrix 6x86L [SOLVED]

I have reinstall the whole OS (one startup dll is missing or corrupt). Is there a program for Linux (or DOS) that will detect bad memory? Regards, Vladislav >-- >From: Al Youngwerth[SMTP:[EMAIL PROTECTED] >Sent: Friday, October 24, 1997 5:25 PM >To: Vladislav Papay

RE: [Q] Cyrix 6x86L

>-- >From: Joost Kooij[SMTP:[EMAIL PROTECTED] >Sent: Friday, October 24, 1997 6:10 AM >To: Vladislav Papayan x285 >Cc:'Debian User' >Subject: Re: [Q] Cyrix 6x86L > >On Thu, 23 Oct 1997, Vladislav Papayan x285 wrote: > >> Hi

[Q] Cyrix 6x86L

Hi I just upgraded to the latest unstable (libc6) stuff. Including October 18 version of gcc -- now every time I try to compile anything I get sig 11 and interneal compiler error. Also tar -zxpvf on many files that I have returns an error that CRC check failed (it worked ok on those packages befor

[Q] Several questions

Hello, as of this Sunday I downloaded and updated almost of my packages that now compiled with gnulibc6 (with exception of X11 stuff). I ran into a couple of problems and am not sure if I caused them. 1. After installing ldso, libc6, I installed libreadline2 -- that some how deleted a link to my

[Q] StarOffice and Spell check

Hi, I installed a version (3.1) of StarrOficce (ENGLISH) -- but when I click on Spell check button -- it does not do anything. Do I need to configure somehow ispell package -- or it is just a problem with StarOffice? Thanks in advance, Vladislav -- TO UNSUBSCRIBE FROM THIS MAILING LIST: e-mail

RE: [Q][Thanks] How to Print in DEBIAN

er 22, 1997 7:11 PM >To: Vladislav Papayan x285 >Cc:The recipient's address is unknown. >Subject: Re: [Q] How to Print in DEBIAN > >Vladislav, > > Even though it says that it has HP 500C emulation, this just means >that it >will emulate the printer on

RE: [Q] How to Print in DEBIAN

h a >driver. You cannot boot to true DOS and use the printer. It also has >no NT >or OS/2 drivers. I doubt that out of the box the printer will work >with >Linux. If somone knows different, please let me know. > >Steve Mayer >[EMAIL PROTECTED] > >Vladislav Papayan x

RE: Rogue Wave lib

RogueWave has Tools.h++ which is a library of collection and utility classes. Also they have DBTools.h which encapsulates Database access to different databases (Informix native, Oracle native, Sybase native, and ODBC). There are a lot of libraries that can be used in place of tools.h -- OSE for

[Q] How to Print in DEBIAN

Hi , I just bought Lexmark 7000 (1200x1200 dpi) -- I have StarOffice installed -- how do I print? I read print howtos -- but I still do not understand what I have to do to get it work. I installed gs-alladin.deb packages -- I also installed magicfilters. But I have no clue were to specify what p

[Q] Need suggestion on hardware/config

Hi all, I am sorry if this not exactly the right question to ask here -- but I will still try: I am running Debian 1.2 with kernel 2.1.51 on a 486 dx100 -- I would like to upgrade it to a dual pentium 100 (not pro) I already have one pentium 100 processor -- now I need to by another pentium 100 a