On 6/11/2018 7:43 AM, HP Garcia wrote:
I'm following the steps to verify kernel signatures using GNUpg. I'm
following the directions from
https://www.kernel.org/category/signatures.html.
Where I am getting stumped is verifying the tar against the signature.
linux-4.17 linux-4.17.tar linux-4.1
HP Garcia [2018-06-10 22:43:33-07] wrote:
> root@Ultraman:/usr/src# gpg2 --verify linux-4.17.tar.sign
> gpg: assuming signed data in 'linux-4.17.tar'
> gpg: Signature made Sun 03 Jun 2018 02:35:54 PM PDT
> gpg:using RSA key 79BE3E4300411886
^
HP Garcia wrote:
> I'm stumped. Am I missing something?
>
> Thanks for any advice.
Go to pool.sks-keyservers.net or use it in gpg2 to access the public key.
Import the key to gpg2
Proceed with verifying signature as already done.
Recently pool.sks-keyservers.net become the ultimate host of publ
Richard Hector wrote:
> Is that apcupsd doing the self-test, or the UPS itself?
>
yes it comes from apcupsd .
>> The battery was replaced 1 or 2y ago and also it shouldn't just shut down
>> when testing - this emberassing.
>
> I'd start first by confirming that the UPS does have enough battery
I'm following the steps to verify kernel signatures using GNUpg. I'm
following the directions from
https://www.kernel.org/category/signatures.html.
Where I am getting stumped is verifying the tar against the signature.
linux-4.17 linux-4.17.tar linux-4.17.tar.sign
root@Ultraman:/usr/src# gpg2 -
On Monday 11 June 2018 00:16:39 David Christensen wrote:
> On 06/10/18 13:44, Gene Heskett wrote:
> > Greetings all;
> >
> > I have the dvd written, and a new 2T drive currently occupying the
> > /dev/sdc slot.
> >
> > What I want, since the drive has been partitioned to /boot, /home,
> > /, and s
On Sunday 10 June 2018 23:41:36 Rick Thomas wrote:
> > On Jun 10, 2018, at 1:44 PM, Gene Heskett
> > wrote:
> >
> > Greetings all;
> >
> > I have the dvd written, and a new 2T drive currently occupying
> > the /dev/sdc slot.
> >
> > What I want, since the drive has been partitioned to /boot, /hom
On Sunday 10 June 2018 20:55:11 Charlie S wrote:
> On Sun, 10 Jun 2018 16:44:16 -0400 Gene Heskett sent:
> > Greetings all;
> >
> > I have the dvd written, and a new 2T drive currently occupying
> > the /dev/sdc slot.
> >
> > What I want, since the drive has been partitioned to /boot, /home,
> > /
On 06/10/18 13:44, Gene Heskett wrote:
Greetings all;
I have the dvd written, and a new 2T drive currently occupying the
/dev/sdc slot.
What I want, since the drive has been partitioned to /boot, /home,
/, and swap, is 1; for this install to not touch any other drive
currently mounted, and 2
On Sunday 10 June 2018 20:23:49 Mark Fletcher wrote:
> On Sun, Jun 10, 2018 at 04:44:16PM -0400, Gene Heskett wrote:
> > Greetings all;
> >
> > I have the dvd written, and a new 2T drive currently occupying
> > the /dev/sdc slot.
> >
> > What I want, since the drive has been partitioned to /boot,
> On Jun 10, 2018, at 1:44 PM, Gene Heskett wrote:
>
> Greetings all;
>
> I have the dvd written, and a new 2T drive currently occupying
> the /dev/sdc slot.
>
> What I want, since the drive has been partitioned to /boot, /home, /, and
> swap, is 1; for this install to not touch any other d
Hi, I've found this bug consistently on debian testing (updated):
Steps to reproduce:
>From the address bar of pcmanfm, type:
ssh://user@ip
Write password, Enter.
Navigate to the remote machine user folder.
Open, edit and save a plain text file with leafpad.
The file gets blanked (no content at al
On Sun, 2018-06-10 at 11:09 +, Dan Purgert wrote:
> deloptes wrote:
> > Hi,
> > I recently get many of those, which means someone found out that
> > ssh
> > external is on port 2 and is trying to do some evil work there.
> > Should I worry or do something?
>
> Use key-based auth only
> Ens
On Sun, 10 Jun 2018 16:44:16 -0400 Gene Heskett sent:
> Greetings all;
>
> I have the dvd written, and a new 2T drive currently occupying
> the /dev/sdc slot.
>
> What I want, since the drive has been partitioned to /boot, /home, /,
> and swap, is 1; for this install to not touch any other driv
On 08/06/18 18:34, deloptes wrote:
> Hi,
> I found today morning the server shutdown. When looking into the logs I
> found that apcupsd performed self test. It said
>
> Jun 8 07:56:21 server apcupsd[2404]: UPS Self Test switch to battery.
> Jun 8 07:56:23 server apcupsd[2404]: Battery power exh
On Sun, Jun 10, 2018 at 04:44:16PM -0400, Gene Heskett wrote:
> Greetings all;
>
> I have the dvd written, and a new 2T drive currently occupying
> the /dev/sdc slot.
>
> What I want, since the drive has been partitioned to /boot, /home, /, and
> swap, is 1; for this install to not touch any ot
On Fri, Jun 08, 2018 at 09:21:23PM +0200, didier gaumet wrote:
> Le 08/06/2018 à 20:51, Markos a écrit :
> > Hi,
> >
> > I'm starting my studies with Python 3 on Debian 9.
> >
> > I have to install the matplotlib module, but I'm in doubt what is the
> > difference to install with the command:
> >
Hi.
On Sun, Jun 10, 2018 at 03:21:45PM -0400, Gary Dale wrote:
> I have printers attached via USB to my Debian/Stretch server and also one
> that also has an ethernet connection. The problem I'm having is that the
> virtual machines seem to grab exclusive access to the printers, so I can
>
Greetings all;
I have the dvd written, and a new 2T drive currently occupying
the /dev/sdc slot.
What I want, since the drive has been partitioned to /boot, /home, /, and
swap, is 1; for this install to not touch any other drive currently
mounted, and 2; use the partitions I've already setup o
I have printers attached via USB to my Debian/Stretch server and also
one that also has an ethernet connection. The problem I'm having is that
the virtual machines seem to grab exclusive access to the printers, so I
can print from my Linux (Debian/Buster) workstation.
The printers show in the
Hi.
On Sun, Jun 10, 2018 at 07:06:57PM +0300, Michelle Konzack wrote:
> Am 2018-06-10 hackte Reco in die Tasten:
> > Hi.
> >
> > On Sun, Jun 10, 2018 at 02:25:30PM +0300, Michelle Konzack wrote:
> >> Good day,
> >>
> >> I run Stretch on my Laptop with sysvinit.
> >>
> >> I had setup so
On 2018-05-31 at 02:01, Miroslav Skoric wrote:
> After upgrading from Wheezy LTS to Jessie, one of my machines having 512
> MB RAM, does not power off when it reached target shutdown. It seems
> some old issue/bug with systemd or else. In fact, everything closes down
> properly except it does n
Am 2018-06-10 hackte Reco in die Tasten:
> Hi.
>
> On Sun, Jun 10, 2018 at 02:25:30PM +0300, Michelle Konzack wrote:
>> Good day,
>>
>> I run Stretch on my Laptop with sysvinit.
>>
>> I had setup some profiles and tried to start them by passing 2, 3,
>> 4, 5 at the end of the Kernel commandli
On 06/04/2018 03:12 PM, Curt wrote:
I'm really too ignorant to be answering questions and should be asking some.
However I can't think of any.
Except: any clues in the logs?
Look here:
/usr/share/doc/systemd/README.Debian.gz
under
Debugging boot/shutdown problems
===
Reco wrote:
> You mean that all these connections originate from 197.159.128.171?
> "iptables -I INPUT -s 197.159.128.171/29 -j DROP" will take care of it.
>
No this was just an example - they come from different IPs. Some days
nothing, some days it is nothing.
> While you're at it, write an ab
Anyone here still interested in PostScript? I have these three
manuals and wonder whether to donate them or recycle the paper.
PostScript Language Reference Manual, Second Edition
PostScript Language Tutorial and Cookbook, Twenty-first Printing, January 1993
Adobe Type 1 Font Format, Version 1.1
On Sun, Jun 10, 2018 at 11:09:49AM -, Dan Purgert wrote:
> deloptes wrote:
> > Hi,
> > I recently get many of those, which means someone found out that ssh
> > external is on port 2 and is trying to do some evil work there.
> > Should I worry or do something?
>
> Use key-based auth only
>
On 10-06-18, Reco wrote:
> Hi.
>
> On Sun, Jun 10, 2018 at 12:55:24PM +0200, deloptes wrote:
> > Hi,
> > I recently get many of those, which means someone found out that ssh
> > external is on port 2 and is trying to do some evil work there.
> > Should I worry or do something?
> > Simila
On Sun, 10 Jun 2018 20:24:41 +0900
likcoras wrote:
> On 06/10/2018 07:55 PM, deloptes wrote:
> > Hi,
> > I recently get many of those, which means someone found out that ssh
> > external is on port 2 and is trying to do some evil work there.
> > Should I worry or do something?
>
> > Simila
Hi.
On Sun, Jun 10, 2018 at 02:25:30PM +0300, Michelle Konzack wrote:
> Good day,
>
> I run Stretch on my Laptop with sysvinit.
>
> I had setup some profiles and tried to start them by passing 2, 3,
> 4, 5 at the end of the Kernel commandline (I use LILO) but the
> appropriated runnlevel
Hi.
On Sun, Jun 10, 2018 at 12:55:24PM +0200, deloptes wrote:
> Hi,
> I recently get many of those, which means someone found out that ssh
> external is on port 2 and is trying to do some evil work there.
> Should I worry or do something?
> Similar for apache web server.
You mean that
On 06/10/2018 07:55 PM, deloptes wrote:
> Hi,
> I recently get many of those, which means someone found out that ssh
> external is on port 2 and is trying to do some evil work there.
> Should I worry or do something?
> Similar for apache web server.
> I think both are secure: for ssh no users
Good day,
I run Stretch on my Laptop with sysvinit.
I had setup some profiles and tried to start them by passing 2, 3,
4, 5 at the end of the Kernel commandline (I use LILO) but the
appropriated runnlevel ist not entered.
Do I mis something?
Since systemd anything is screwed up und nothing is w
Good day,
I run Stretch on my Laptop with sysvinit.
I had setup some profiles and tried to start them by passing 2, 3,
4, 5 at the end of the Kernel commandline (I use LILO) but the
appropriated runnlevel ist not entered.
Do I mis something?
Since systemd anything is screwed up und nothing is w
deloptes wrote:
> Hi,
> I recently get many of those, which means someone found out that ssh
> external is on port 2 and is trying to do some evil work there.
> Should I worry or do something?
Use key-based auth only
Ensure root ssh login is not allowed
Perhaps fail2ban (or equivalent)
Perhaps
Hi,
I recently get many of those, which means someone found out that ssh
external is on port 2 and is trying to do some evil work there.
Should I worry or do something?
Jun 10 02:44:38 server sshd[3189]: debug1: Forked child 21583.
Jun 10 02:44:38 server sshd[21583]: debug1: Set /proc/self/oom
On 2018-06-10, wrote:
>
> On Sat, Jun 09, 2018 at 03:23:06PM +0300, Georgi Naplatanov wrote:
>> Hi,
>>
>> I'm using Debian Stretch and I'm trying to connect to PostgreSQL server
>> (Debian 9) with PgAdmin (Debian 9) through SSH tunnel.
>>
>> PgAdmin has built-in SSH support but when I try to co
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
On Sat, Jun 09, 2018 at 03:23:06PM +0300, Georgi Naplatanov wrote:
> Hi,
>
> I'm using Debian Stretch and I'm trying to connect to PostgreSQL server
> (Debian 9) with PgAdmin (Debian 9) through SSH tunnel.
>
> PgAdmin has built-in SSH support but whe
38 matches
Mail list logo
