Hello,
I could have sworn that sometime ago I read in this mailinglist that
the microphone works with alsa on a tibook. Several times I searched the
archives, and the web in general, but could not find it again. Was I
just fantasizing?
Here's what /proc/cpuinfo says:
motherboard : P
Yaaahooo!
This morning both Myrna (powerbook G4) and I woke up. For Myrna it was
the the first good night sleep since I install Linux.
So far I've seen none of the degradation over time that I had before the
patch.
Alsa -- at first it didn't seem to work but then discovered that,
fiddling with t
On Fri, 2003-03-14 at 13:33, Brett Carter wrote:
> On Wed, Mar 12, 2003 at 10:55:48PM -0500, digger vermont wrote:
> > Hello,
> > I could have sworn that sometime ago I read in this mailinglist that
> > the microphone works with alsa on a tibook. Several times I searched
Don't feel too bad, Soebbi.
As infrequently as I apply patches I always have to refigure it out.
The secret is in the "<" From the "root" dir. I believe what I had is
patch -p1 Hi everyone!
>
> I'm feeling a bit ashamed, since I now must admit that I am quite new
> to Linux, but how do I apply
On Mon, 2003-05-19 at 01:20, [EMAIL PROTECTED] wrote:
> Hi!
>
> I have a tibook, so i don't have any floppy drive.
> If i reinstall osX, i need to run ybin to recover the boot control?
>
> but how can i acces linux to run ybin?
>
> Thanks.
>
Hello,
I recently had to reinstall osx on a powerboo
Hello,
On Tue, 2003-06-17 at 16:54, Benjamin Herrenschmidt wrote:
> On Tue, 2003-06-17 at 21:53, Laurent Bigonville wrote:
> > Hi,
> You tried the pmac defconfig ?
>
> (first make distclean, then make pmac_defconfig; make oldconfig; and buid it)
>
I've never used pmac_defconfig. Make says
On Sat, 2003-07-26 at 14:47, Thomas Otto wrote:
> > Problem 1:
> > I can't record anything with my soundcard. Playing is no problem. I
> If you are talking about the little microphone top-right of the screen:
> IIRC you will have to wait for the 2.6 kernels with alsa since dmasound
> isn't
Hello Adam,
head Makefile gives me:
VERSION = 2
PATCHLEVEL = 4
SUBLEVEL = 21
EXTRAVERSION = -ben2
KERNELRELEASE=$(VERSION).$(PATCHLEVEL).$(SUBLEVEL)$(EXTRAVERSION)
On Thu, 2003-08-21 at 12:01, Adam H. Done wr
Hello All,
I've been having trouble the last couple of days syncing the benh
kernel. It seems to be stopping at the same place each time.
Here's the command line:
rsync -az rsync.penguinppc.org::linux-2.4-benh ~/src/benh_kernel
and here's where it stops:
recv_generator(arch/cris/boot
Hi Frank,
On Fri, 2003-10-03 at 13:40, Frank Murphy wrote:
> I just tried to add the unofficial xfce4 deb list to apt's sources.list, but
> it doesn't work. Then I realized that the line for Michael Däzner's DRI X was
> failing too.
>
> Does anyone else see this when doing apt-get (or aptitude)
On Fri, 2003-10-24 at 12:51, Adam Done wrote:
> On Wed, 2003-10-22 at 06:20, Michael Schmitz wrote:
> > > > Straight kernel.org or -benh ??
> > >
> > > Straight kernel.org kernel :-)
> >
> > Big mistake. Use Ben's tree.
>
> Where is Ben's tree found.. I tried using rsync and reading over 5500
>
Hello All,
I was pleasantly surprised to to find that Alsa now has capture on a
Powerbook with Snapper. I haven't been able to figure out how to use
it. I have /proc/asound/card0/pcm0c/ but amixer doesn't report anything
for Capture. Is Mic or Line yet to be implemented?
Thanks
digge
Hello All,
With the benh-2.6-test11 kernel pressing CapsLock on my powerbook is
putting it to sleep. This is not fun since I habitually hit it. Its
happening both on the console and in X. It does not happen with
benh-2.6-test9.
With showkey I get,
keycode 58 press
keycode 58 release
On Thu, 2003-12-04 at 18:54, Benjamin Herrenschmidt wrote:
> > To be precise: caps lock behaves like the power button. That putting the
> > machine to sleep is pbbuttonsd silliness of course.
>
> Of course that doesn't happen on my tipb here...
>
> Can one of you check where those keycode come fr
On Mon, 2005-10-17 at 08:54 +1000, Benjamin Herrenschmidt wrote:
> > I've done tests this afternoon, and what I found is that the devices
> > change that the system "sees" from one reboot to another. Specifically
> > it is this device on a Titanium IV that the system knows about in one
> > instance
On Mon, 2005-10-17 at 08:54 +1000, Benjamin Herrenschmidt wrote:
...
> > If the eth0 device above is missing at another system boot the whole
> > devices order is shifting, and changed, and as a consequence
> > previous eth2 (radio card) simply does not exist any more, thus
> > rendering my settin
Hi Wolfgang,
This isn't the answer to your question regarding bk, but may help. I
use rsync for the benh kernels.
rsync -avz --delete source.mvista.com::linuxppc-2.5-benh ~/src/2.5-benh
Hope this is of help,
digger
On Fri, 2004-01-02 at 16:22, Wolfgang Pfeiffer wrote:
> Hi All,
>
> I'm look
On Mon, 2004-01-05 at 09:58, Simon Vallet wrote:
> Hi,
>
> On Mon, 5 Jan 2004 12:12:33 +0100
> Sebastian Henschel <[EMAIL PROTECTED]> wrote:
>
...
> >
> > are you sure, that vmlinuz and System.map have really been copied from
> > the same source tree and generated from the same kernel-build?
> w
Hello Joanary,
Do you have have appropriate entries in yaboot.conf and run ybin?
digger
On Mon, 2004-01-19 at 17:02, Jaonary Rabarisoa wrote:
> Hi all,
> Is it possible to configure Openfirmware so that it can boot directly
> debian. When booting I always have to open OF and type "boot
> hd:9
Hi Wolfgang
On Thu, 2004-02-12 at 15:53, Wolfgang Pfeiffer wrote:
> Hi All
>
> I need some valid docs for burning CD's on a
> Powerbook G4.
>
> I'm on unstable, 2.4.22-ben2., Gnome-2.4
>
I'm using unstable also with a powerbook G4.
> nautilus-cd-burner doesn't work, and the docs I found so f
Hello Jared,
On Thu, 2004-02-12 at 14:35, [EMAIL PROTECTED] wrote:
> I am experiencing problems with my dmasound driver when trying to run
> audacity.
> It appears to be attempting to initialize the device for recording (which is
> not supported) which causes dmasound to dump the device all toge
Hi wolfgang
On Thu, 2004-02-12 at 20:11, Wolfgang Pfeiffer wrote:
> On Thu, 2004-02-12 at 22:44, digger vermont wrote:
> > Hi Wolfgang
...
> >
> > I've also had good results with xcdroast. I believe the doc's that came
> > with it were enough to help me get
Hello All,
Does anyone have audacity working? In particular for me the playback is
horribly distorted. I imagine its the endian issue, but I thought that
problem had been ironed out and it worked for me in the past. The
playback is the same with both 2.4 and 2.6 both using alsa. Along wi
On Sun, 2004-02-15 at 14:17, Gregory Seidman wrote:
> On Sat, Feb 14, 2004 at 09:45:10AM +0100, Joe Malik wrote:
> } On Sat, Feb 14, 2004 at 12:35:25AM -0500, digger vermont wrote:
> } > Hello All,
> } > Does anyone have audacity working? In particular for me the playback
On Sun, 2004-02-15 at 20:45, Gregory Seidman wrote:
> On Sun, Feb 15, 2004 at 07:45:57PM -0500, digger vermont wrote:
> [...]
> } At this point I'm hoping that if I can compile audacity with alsa and
> } jack support it may work.
>
> Please make sure to submit a bug on the
4-02-15 at 22:15, digger vermont wrote:
> On Sun, 2004-02-15 at 20:45, Gregory Seidman wrote:
> > On Sun, Feb 15, 2004 at 07:45:57PM -0500, digger vermont wrote:
> > [...]
> > } At this point I'm hoping that if I can compile audacity with alsa and
> > } jack support
On Wed, 2004-02-18 at 11:09, Colin Leroy wrote:
> > 2.6.3-rc2-ben1 compiled fine. Does this have to do with your patch or
> > did I screw up my configuration?
>
>
> new radeonfb wants i2c-core in the kernel (CONFIG_I2C_CORE=y).
Thanks
digger
Hello Ben,
I just rsync'd to 2.6.3-rc3-ben1 and added your patch. I get these
errors:
UPD include/linux/compile.h
CC init/version.o
LD init/built-in.o
LD .tmp_vmlinux1
drivers/built-in.o(.text+0x5f01c): In function `radeon_setup_i2c_bus':
: undefined reference
Hi Ben,
On Tue, 2004-02-17 at 22:21, Benjamin Herrenschmidt wrote:
> Hi need people who own those machiens, especially the recent iBook2 models
> with a G3 CPU and titanium powerbooks with a G4, to test this patch and
> tell me if sleep mode still works reliably or becomes unstable.
>
> (It won't
Hello All,
Occasionally I've been have kernel Oops. I've just started to
recognize the the signs to look for before it ends in freezing. It
tends to happen after sleeping but I'm not sure if it starts there. I'm
using a 2.6.3-ben2 kernel but I believe the same thing was happening
with th
orinoco50452 1 airport
hermes 13536 2 airport,orinoco
On Wed, 2004-02-25 at 23:28, digger vermont wrote:
> Hello All,
> Occasionally I've been have kernel Oops. I've just started to
> recognize the the signs to look for before it en
On Fri, 2004-02-27 at 05:07, Benjamin Herrenschmidt wrote:
> > IN from bad port 2f0 at e2109c38
> > IN from bad port 2f1 at e2109c5c
> > IN from bad port 2f8 at e2109c38
> > IN from bad port 2f9 at e2109c5c
>
> etc...
>
> What is this driver from hell ? You are running a driver for
> some legac
Hello,
On Fri, 2004-03-05 at 05:55, Utilisateur Debian wrote:
> Hi all,
> Alsa seems to be correctly installed in my system but I don't still have
> the sound. Here is the out put when I restart it with:
> "/etc/init.d/alsa restart"
>
> debian:/etc/init.d# /etc/init.d/alsa restart
Hello Ethan,
The new ofpath gives the same dir's for 2.4.25 and 2.6.4. It works
fine to boot linux and macosx on my powerbook. I didn't try a cd. I
never had any problems though and yaboot.conf used /dev/xxx statements
to begin with:
boot=/dev/hda9
device=hd:
partition=11
root=/dev/hda1
Hello Stefano,
Have you any thought to package powerprefs?
Thanks for the other pbbuttons pkgs,
digger
On Tue, 2004-03-23 at 10:40, Stefano Zacchiroli wrote:
> On Tue, Mar 23, 2004 at 02:23:44PM +0100, Stefano Zacchiroli wrote:
> > I've just packaged pbbuttonsd 0.5.9. I've forward porte
Hi Matthias,
On Mon, 2004-04-19 at 14:01 +0200, Matthias Grimm wrote:
> Hi,
> Today I would ask for opinions and ideas about the future of pbbuttonsd's
> script interface. To become more flexible and maybe share development and
> infrastructure with other powermanagement systems (like apmd) for s
Hi Soeren,
On Sun, 2004-03-07 at 20:42 +0100, Soeren Sonnenburg wrote:
> Hi all...
>
> is it possible to somehow use the internal microphone (full duplex ?!)
> to get h323 voip to run (using e.g. gnomemeeting) ?
>
I believe it depends on what computer you have. I have a powerbook g4
with a Sna
Hi Soeren,
On Wed, 2004-04-21 at 07:14 +0200, Soeren Sonnenburg wrote:
> On Wed, 2004-04-21 at 00:36, digger vermont wrote:
...
> >
> > I believe it depends on what computer you have. I have a powerbook g4
> > with a Snapper sound-chip. Unfortunately the last time I tried
Hello All,
Thinking that the problem with gnucash and libltdl was solved I
upgraded them both. The problem is not fixed. Now I'd like to downgrade
libltdl3 to 1.5.2-1 but it doesn't exist any more on the repositories.
The only platform its available for is hurd. What happened to it? I
On Tue, 2004-05-04 at 17:30 -0400, Mike Small wrote:
> If you don't mind missing the business core module functionality
> you could do what I did and comment out the following line (#427) in
> /usr/share/gnucash/guile-modules/gnucash/main.scm:
>
> (load-module "gnucash/business-gnome" 0 #t)
>
On Tue, 2004-05-25 at 17:18 +0100, Rory Campbell-Lange wrote:
> I'm trying to get mol to load my OSX partition.
>
> I've set
> blkdev: /dev/hda16 -rw
>
> startmol --osx
>
> --> The volume '/dev/hda16' is locked
> ...
> Can't read Elf32 image header
>
41 matches
Mail list logo
