Hi all,
I'm a new subscriber to this excellent list. Thanks in advance to all
for your vitality and competent feedback, that I can verify via web
archive along the last year: without it I'd never have been able to work
properly with Debian on my TiBookIII.
My question:
How to configure XF86Con
On Thu, Apr 03, 2003 at 07:22:46PM +0200, stamp wrote:
> lshe> Has anybody a 'ready for this use' XF86Config-4?
>
> i don't know if this helps you a lot, but i'm using a ibook 800Mhz
> (with the m7, too).
> my two (!) config-files are appended...
> the .single works fine for me for just the intern
On Fri, Apr 04, 2003 at 03:31:30PM +0200, stamp wrote:
>
> perhaps you have to insert the "fbdev"-option
>
Woo, I hadn't realized that you have this option disabled in .dual
config. I've tried again and it works :). Thanks for your
help and excuse me for my slip.
Only one problem: the image in e
>
> How do i have to configure X to work without framebuffer?
>
In Section "Device", you should have the following line commented:
Option "UseFBDev".
So, you should have:
# Option "UseFBDev"
LuisS.
> How to configure XF86Config-4 to use my laptop (video card M7) with a
> projector? I have to give a conference next week. The projector is in
> the conference room. I need to have enabled the _two_ screens there. But
> I haven't chance to test the possible configurations. I've read in
> Crist
On Sat, Apr 12, 2003 at 03:05:47PM +0200, Michel Dänzer wrote:
> On Die, 2003-04-08 at 01:13, [EMAIL PROTECTED] wrote:
> > > How to configure XF86Config-4 to use my laptop (video card M7) with a
> > > projector? I have to give a conference next week. The projector is in
> > > the conference room
On Mon, Apr 14, 2003 at 05:03:23PM +0200, Jean Monnat wrote:
> Dear Debian specialists,
>
> Because of printing problems, I tried to upgrade the kernel
> 2.4.18-newpowermac to the kernel 2.4.20-ben10. So I downloaded it and then
> tar -xvzf 2.4.20-ben10.tar.gz. I followed instructions on how to in
>
> Did anyone have the same problem or a similar one?
>
I had got the same problem last month with my TiBook III. I haven't got
any idea how it can be fixed :(
LuiS.
Has anybody experience with the new LaCie DataBank FireWire Harddisk? I
see in http://linux1394.sourceforge.net that the LaCie PocketDrive 30GB
is well supported. But they don't mention the new DataBank.
Any idea about the best choice for us between pocket FireWire harddisks?
LuiS.
I was browsing without fixed directions ... and I found out two
different kernel .config for tibook (benh tree):
http://ppckernel.org/configs/benh-powerbookG4
http://cattlegrid.net/~christophe/titanium/.config
This isn't an important issue, I think, but only for fun - I'm curious
about some of
Oops! I've just sent this mail to the wrong thread. Of course, it should
be in the _main thread_. APOLOGY TO ALL.
LuiS.
On Sun, Jun 15, 2003 at 04:40:59PM +0200, Wolfgang Pfeiffer wrote:
> Hi there.
>
> Does anybody know about good, correct documentation
> on how to install X on a PBG4?
>
This is good for TiBookIII:
http://www.cattlegrid.net/~christophe/titanium/
> Kernel-Version here, AFAICT, as shipped: 2.4.1
On Wed, Sep 10, 2003 at 02:49:06AM +0200, Andreas Wüst wrote:
> Hi
>
> I did a long deferred update (due to heavy lack of time), which also
> updated console-common to version 0.7.26, and after reboot, the console
> keymap was messed up (feels like some us keymap or something similar).
>
> During
On Wed, Oct 22, 2003 at 09:22:16AM +0200, Mathieu Segaud wrote:
> [EMAIL PROTECTED] writes:
>
> if you want to prevent them to start at boot, just remove startup
> symlinks in /etc/rcX.d.
Debian mode: there is a debian command to update the System V style
init script links:
update-rc.d -f re
On Wed, Jan 12, 2005 at 08:27:30PM +1100, Dean Hamstead wrote:
> >I'm starting out on a PowerMac dual G5. It comes pre-formatted with the
> >OS, and I'll probaly reformat it to my liking, but I am wondering how I
> >can set up the partitioning. I want to use various flavors of Linux
> >(YDL, g
On Fri, Feb 11, 2005 at 02:42:59PM +0200, Martin-Éric Racine wrote:
> On Fri, 11 Feb 2005, Sven Luther wrote:
>
> > 2) you say "Build an optimized kernel". I strongly object to this
> > recomendation, and ask you to remove it from your howto. The existing
> > debian
> > kernel should be eno
>
> echo `cat /proc/device-tree/model`
>
PowerBook5,3
> and
>
> for i in `find /proc/device-tree -name layout-id -print`; do echo $i &&
> hexdump -n4 $i; done
>
Nothing
>
>
Best Regards,
Luis
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contac
got success with that daily built
image.
Greetings,
Luis Sanjuan
On Tue, Jun 01, 2004 at 04:02:43PM -0600, Lakin Wecker wrote:
> On Tue, 2004-06-01 at 15:46, Luis Sanjuan wrote:
> > > I didn't have much luck with the beta 4 installer. Specifically the
> > > yaboot installer failed miserably and was a pain in the ass to fix. The
>
FYI below is my cpuinfo (kernel version: 2.6.6)
At the same clock freq my bogomips is clearly higher.
Do you have a 2.6 kernel ?
processor : 0
cpu : 7457, altivec supported
clock : 1333MHz
revision: 1.1 (pvr 8002 0101)
bogomips: 1328.52
machine
On Sat, Jun 05, 2004 at 01:46:45PM -0700, Nirmal Govind wrote:
>
>
> Luis Sanjuan wrote:
> >FYI below is my cpuinfo (kernel version: 2.6.6)
> >
> >At the same clock freq my bogomips is clearly higher.
> >Do you have a 2.6 kernel ?
> >
> >processor
On Sat, Jun 26, 2004 at 03:40:43PM -0500, Jim Ricken wrote:
> -BEGIN PGP SIGNED MESSAGE-
> Hash: SHA1
>
> Hey
> Does Debian have any program to play video movies?
> Jim
Besides xine (or mplayer), there is videolan (vlc package).
Moreover, it can be plugged to mozilla via mozilla-plugin-v
>
> But there is still some things that I'm not able to make working :
>
> - Brightness of the LCD screen : pbbuttons is installed and sound and CD
> eject keys works well, but nothing append with brightness keys.
>
>
> - CPU Frequency scaling : with kernel-image-2.6.6-powerpc my /proc/cpufre
On Fri, Jul 02, 2004 at 06:03:13PM +0200, Djoumé SALVETTI wrote:
> Le vendredi 07/02/04 Djoumé SALVETTI <[EMAIL PROTECTED]> a écrit :
> > > Do you have sysfs enabled ? See in /sys/devices/system/cpu/cpu0/cpufreq/
> > >
> > > Besides, You need install a program that controls CPU speed / frequency
On Sat, Jul 03, 2004 at 01:21:14PM +0200, Djoumé SALVETTI wrote:
> Le vendredi 07/02/04 Luis Sanjuan <[EMAIL PROTECTED]> a écrit :
> > FYI. From kernel Documentation:
> >
> > CONFIG_CPU_FREQ_PROC_INTF:
> >
> > This enables the /proc/cpufreq interface for co
> >
> > So I supposed it's the MacRISC3 compatibilty mode that must be used in
> > cpufreq code, but it doesn't seems to work with my CPU...
> >
> >
>
> Maybe. Can anybody confirm wheather PowerBook6,4 is supported
> by cpufreq ?
>
I've just found this note from the ChangeLog of the latest sn
Hi, Sven
On Tue, Jul 13, 2004 at 04:18:27PM +0200, Sven Luther wrote:
> On Tue, Jul 13, 2004 at 06:58:21AM -0400, Albert Cahalan wrote:
> > On Tue, 2004-07-13 at 07:15, Sven Luther wrote:
> > > On Mon, Jul 12, 2004 at 10:29:25PM -0400, Albert Cahalan wrote:
> >
> > > > Just yesterday I grabbed a
Here it works out of the box on a TiBook III (G4) :)
Greetings,
Luis
On Thu, Sep 30, 2004 at 09:35:22PM +0200, Kjetil Ørbekk wrote:
> Know it's a little of-topic, but i wonder if any of you have tried
> Ubuntu on a powerpc (did I hear iBook g4)?
>
> I have Gentoo on mine now, to try if it worked
On Thu, Nov 11, 2004 at 02:04:43PM +0100, Sebastian Henschel wrote:
> hello...
>
> * Benjamin Herrenschmidt <[EMAIL PROTECTED]> [2004-11-11 13:15 +0100]:
> > On Thu, 2004-11-11 at 03:01 -0200, Federico Gamio wrote:
> > >
> > > My 15" PowerBook (5,2) (1.25Ghz) can't resume from sleep.
>
> [...]
>
Hi Jaume
Have you tried with Fn + F1, etc.? This is now the default KBDMode
in the pmac Module.
Greetings
Luis
On Wed, Nov 17, 2004 at 09:46:13AM +0100, Jaume Sabater wrote:
> Hi, mates.
>
> I just upgraded my iBook G3 800 MHz and version 0.6.6-1 of pbbuttonsd
> came. And the special keys in m
On Tue, Dec 14, 2004 at 05:46:14PM +, Joerg Sommer wrote:
> Hi,
>
> why hotplug doesn't load snd-powermac? I see I can't see the sound card
> with lspci (why?), but is there another way to make this work?
>
Add snd-powermac to /etc/modules
> Jörg.
>
> --
> - StGB §§ 328 Absatz 2, Nr.3 : M
On Wed, Jan 12, 2005 at 08:27:30PM +1100, Dean Hamstead wrote:
> >I'm starting out on a PowerMac dual G5. It comes pre-formatted with the
> >OS, and I'll probaly reformat it to my liking, but I am wondering how I
> >can set up the partitioning. I want to use various flavors of Linux
> >(YDL, g
On Sun, Dec 21, 2003 at 04:12:17PM +, Dan Field wrote:
> Hi list.
>
> I've been playing with this for a few days now but only really got
> somewhere near working today.
>
> I currently have a stable booting (via yaboot in the bootsector)
> 2.4.21benh kernel and a 2.6.0-test11-benh kernel (bu
On Wed, Oct 27, 2004 at 03:42:48PM +1000, Benjamin Herrenschmidt wrote:
> Hi !
>
> This is an experimental patch against 2.6.9. It concerns the ATI based
> Aluminium PowerBook. The nVidia based ones aren't concerned at all, and
> the iBook G4 will have to wait a bit more for me to get the video wa
X works fine here on my AlBook 1.33GHz 17'' (ATI Radeon 9600)
kernel: 2.6.0-ben1 (AFAIK, no problems with newer 2.6.X)
debian-dist: sid
xserver: xserver-xfree86-dri-trunk (from michel daenzer)
XF86Config-4:
Section "Device"
Identifier "AlBook Internal Video"
Driver "
On Sat, Jan 03, 2004 at 05:15:41AM +0100, mammique wrote:
> Le sam 03/01/2004 à 01:21, Luis Sanjuan a écrit :
> > X works fine here on my AlBook 1.33GHz 17'' (ATI Radeon 9600)
> >
> > kernel: 2.6.0-ben1 (AFAIK, no problems with newer 2.6.X)
> > debian-dist:
On Sat, Jan 03, 2004 at 06:57:48PM +0100, Fleny68 wrote:
> Luis Sanjuan a écrit :
> >Section "Device"
> > Identifier "Card0"
> > Driver "radeon"
> >#BusID "PCI:0:16:0" ### it's
You can try the "Modo experto" solution in the address you have cited or,
maybe, build your own debian-installer CD-image (net access is needed
in both cases).
Instructions on building debian-installer CD image (mini-ISO) for powerpc
can be found here:
http://www.soziologie.ch/users/steinlin/d-
On Sun, Jan 11, 2004 at 04:47:49AM +0100, Sven Herzberg, GNOME Deutschland
wrote:
> Hi,
>
> today I tried to get burning working with my new Powerbook 15". Has
> anyone of you already burnt successfully with the PBook?
Succes here as well with CD burning on an AlBook 17" (now without SCSI
emu
On Sun, Jan 11, 2004 at 03:30:07PM +0100, [EMAIL PROTECTED] wrote:
> Hi,
>
> Luis Sanjuan a écrit :
> >On Sun, Jan 11, 2004 at 04:47:49AM +0100, Sven Herzberg, GNOME Deutschland
> >wrote:
> >
> >>Hi,
> >>
> >> today I tried to get burning wo
On Mon, Jan 12, 2004 at 11:54:03AM +0100, Jens Axboe wrote:
> On Sun, Jan 11 2004, [EMAIL PROTECTED] wrote:
> > Hi,
> >
> > Luis Sanjuan a écrit :
> > >On Sun, Jan 11, 2004 at 04:47:49AM +0100, Sven Herzberg, GNOME Deutschland
> > >wrote:
> > &
On Wed, Jan 14, 2004 at 04:46:56PM +0100, [EMAIL PROTECTED] wrote:
> > I just finished installing my new 2.6.1 kernel, and it broke my
> > ethernet card configuration or something. Eth0 failed to go up on
> > start, and ifconfig eth0 up shows this:
> > eth0: ERROR while getting interface flags:
On Wed, Jan 14, 2004 at 08:50:43PM +0100, [EMAIL PROTECTED] wrote:
> > > > I just finished installing my new 2.6.1 kernel, and it broke my
> > > > ethernet card configuration or something. Eth0 failed to go up on
> > > > start, and ifconfig eth0 up shows this:
> > > > eth0: ERROR while getting i
On Fri, Jan 16, 2004 at 07:28:35PM +0100, RABARISOA Jaonary wrote:
> Hi all,
> I want to install debian on my powerbook. I have the new powerbook alu
> 15'' with an ATI video card. I've alredy done the installation but I
> can't run the Xserver. I've used the lastest sarge debian installer
> wit
> >Here where I am now:
> > + xfree work but the screen is not very nice
Do you have a correct Modes line?:
it should be:
Modes "1280x854" ## Modes for 15''
(my configuration is for 17'')
> > + the mouse don't behave as I expect (too sensitive and too speed)
Check with different Prot
On Sun, Jan 18, 2004 at 09:46:19PM +0100, Francisco J. F. Serrador wrote:
> Is it possible to play CDs on an Ibook G4?
>
Why not? I don't know your machine, but I haven't any problems playing
CDs on my Albook. I use Xine, but there are many other options.
Greetings.
> >
> Why not? I don't know your machine, but I haven't any problems playing
> CDs on my Albook. I use Xine, but there are many other options.
^
Sorry, I mean: there should be. Here only probed with xine.
>
>
> The other problem is that when I start the system I always have to open
> the Open Firmware in order to boot debian with "boot hd:9,yaboot". If I
> don't do this, my system will boot automaticly with mac os X.
> I've already run the yabootconfig command and ybin. And every thing
> seems goe
48 matches
Mail list logo
