xine still has the green edges, as described earlier. No changes. But
at least mplayer now seems to work.
Wolfgang
--
http://heelsbroke.wordpress.com
--
To UNSUBSCRIBE, email to debian-powerpc-requ...@lists.debian.org
with a subject of "unsubscribe". Trouble? Conta
Hi Michel, Hi All
I'll try to make it as short as possible::
*** 1:
mplayer-g4 is replaced by mplayer. Please remember I got the errors
with an mplayer-g4 on the TitaniumIV
*** 2:
config flags to compile a working mplayer have changed, too. build-deps
probably too. This is relevant fo
On Sat, Nov 14, 2009 at 08:54:14AM -0800, Michel Dänzer wrote:
> On Fri, 2009-11-13 at 14:11 +0100, Wolfgang Pfeiffer wrote:
> >
> > Since a few weeks some .wmv files cannot be played properly by both
> > mplayer and xine, movies that could be played fine without these green
On Fri, 2009-11-13 at 14:11 +0100, Wolfgang Pfeiffer wrote:
>
> Since a few weeks some .wmv files cannot be played properly by both
> mplayer and xine, movies that could be played fine without these green
> colors some time ago, at least as far as I can recall it. When played
>
Hi All
Since a few weeks some .wmv files cannot be played properly by both
mplayer and xine, movies that could be played fine without these green
colors some time ago, at least as far as I can recall it. When played
back now, these movies look like shown on the pictures on this page:
http
Wolfgang Pfeiffer wrote:
> Looks like the documentation at least, for vlc, in the regard as
> mentioned, is better than for mplayer. But there actually seems to be
> a stream server in the mplayer sources. Excerpt from
>
> ./mplayer-checkout-2009-04-29/TOOLS/README:
> [cut]
>
Hi all
I start a new thread as the topic on the original one is becoming off-topic:
On Wed, Apr 29, 2009 at 11:27:05AM +0100, Rafal Czlonka wrote:
> Wolfgang Pfeiffer wrote:
> > > AFAIK, mplayer cannot stream audio and video like vlc does. That is why I
> > > use it.
&g
Package: mplayer
Severity: important
X-Debbugs-CC: debian-powerpc@lists.debian.org
Hi.
I just installed lenny on an iBook G3 that I own and I needed to see
some lecture videos, but it seems that mplayer is compiled with altivec
enabled and it gives me an illegal instruction signal and dies
Hi Christian, hi All
On a Powerbook5,8:
Please note that with the official Debian repositories in the
sources.list a build-dep for mplayer does not work at all:
--
# apt-get build-dep mplayer
Reading package lists... Done
Building dependency tree
Reading state information
; af_volnorm.c:213: internal compiler error: in copy_to_mode_reg, at
> explow.c:621
> > Please submit a full bug report,
> > with preprocessed source if appropriate.
> > See for instructions.
> > make[2]: *** [af_volnorm.o] Error 1
> > make[2]: Leaving direct
it a full bug report,
> with preprocessed source if appropriate.
> See for instructions.
> make[2]: *** [af_volnorm.o] Error 1
> make[2]: Leaving directory `/Archives/build/mplayer/mplayer-1.0~rc2/libaf'
> make[1]: *** [libaf/libaf.a] Error 2
> make[1]: Leaving directory `/Archive
t; >
> http://buildd.debian.org/~jeroen/status/package.php?suite=unstable&p=mplayer&a=powerpc
> > mplayer has failed building in powerpc due to 'internal compiler error';
> > but it compiles fine in all other archs.
> >
> > May somebody reschedule the b
Hi All
Sorry for answering so late: my Internet line was down.
On Sun, Apr 06 2008, at 21:40 +0200, A Mennucc wrote:
> hi
>
> according to
> http://buildd.debian.org/~jeroen/status/package.php?suite=unstable&p=mplayer&a=powerpc
> mplayer has failed building in powerpc du
On 06/04/2008, A Mennucc wrote:
> hi
Hi,
(and sorry for the possible duplicate, I'm very unsure you're subscribed
to this list; if you are, you should be aware of the following)
> mplayer has failed building in powerpc due to 'internal compiler
> error'; but it com
hi
according to
http://buildd.debian.org/~jeroen/status/package.php?suite=unstable&p=mplayer&a=powerpc
mplayer has failed building in powerpc due to 'internal compiler error';
but it compiles fine in all other archs.
May somebody reschedule the build ?
a.
signature.asc
De
close 397143
thanks
Many thanks to everybody who answered me in the bug or the
debian-powerpc mailing list. In fact, the problem was that I was still
using xorg packages which were from february 2006. Apparently, the
nvidia driver was not able to play movies with the default output driver
('-vo
is a patch wmv3-support-via-vc1.diff.gz in
> > > > http://blog.linux.org.tw/~jserv/archives/001545.html for adding wmv3
> > > > support.
> > > > I have just tested it (rebuild packages from mplayer-g4 source) and it
> > > > works.
> > > >
w/~jserv/archives/001545.html for adding wmv3
> > > support.
> > > I have just tested it (rebuild packages from mplayer-g4 source) and it
> > > works.
> > > But I don't understand well the license in this patch. Can somebody
> > > tell me if I can u
just tested it (rebuild packages from mplayer-g4 source) and it
> > works.
> > But I don't understand well the license in this patch. Can somebody
> > tell me if I can use it ?
> Any reason why this shouldn't be applied to mplayer upstream? Could you
> ask on
On Tue, Mar 07, 2006 at 09:27:06AM +0100, Bin Zhang wrote:
> There is a patch wmv3-support-via-vc1.diff.gz in
> http://blog.linux.org.tw/~jserv/archives/001545.html for adding wmv3
> support.
> I have just tested it (rebuild packages from mplayer-g4 source) and it works.
> But I d
Hi,
There is a patch wmv3-support-via-vc1.diff.gz in
http://blog.linux.org.tw/~jserv/archives/001545.html for adding wmv3
support.
I have just tested it (rebuild packages from mplayer-g4 source) and it works.
But I don't understand well the license in this patch. Can somebody
tell me if
On Sun, Mar 05, 2006 at 12:47:27PM -0500, Tamas K Papp wrote:
[..snip..]
> Another issue: I have PowerBook5,4 which is supposed to have altivec.
> However, mplayer-g4 has problems (strange blocks in videos, etc) while
> mplayer-powerpc works fine. I am just curious why this happens
Hi,
mozilla-mplayer (latest testing, 3.21-1) does not show video. If I
right-click and make it full screen, video appears fine, and when I
turn full screen off again, video does appear inside the page as it
should have in the first place. Is there a way to resolve this?
ii mozilla-firefo
Hi,
I've just updated the gpg key used to sign the mplayer ppc packages's
release file at:
deb http://honk.sigxcpu.org/linux-ppc/debian/ mplayer/
The new key (key-id 0x3F041553506A0744) is available from:
https://honk.sigxcpu.org/misc/sigxcpu-archive-key.gpg
Please update your keyri
7;long time'... ;-)
> > if you load the module genrtc, mplayer won't complain so much about
> > RTC, i believe... the only thing i don't know is if in the .deb
> > kernel package there is that module
>
> Hmm, i don't know these stuffs.. what does genrtc,
Paul TT <[EMAIL PROTECTED]> writes:
> On Thu, 16 Feb 2006 12:46:57 +0800
> William Xu <[EMAIL PROTECTED]> wrote:
>
>> Bartosz Sokolowski <[EMAIL PROTECTED]> writes:
>>
>> > Anyone using Mplayer, any sources for binary packages??
>>
>>
On Thu, 16 Feb 2006 12:46:57 +0800
William Xu <[EMAIL PROTECTED]> wrote:
> Bartosz Sokolowski <[EMAIL PROTECTED]> writes:
>
> > Anyone using Mplayer, any sources for binary packages??
>
> deb http://honk.physik.uni-konstanz.de/~agx/linux-ppc/debian/ mplayer/
>
Bartosz Sokolowski <[EMAIL PROTECTED]> writes:
> Anyone using Mplayer, any sources for binary packages??
deb http://honk.physik.uni-konstanz.de/~agx/linux-ppc/debian/ mplayer/
--
William
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trou
Hello!
Recently I wanted to compile Mplayer on my Debian (kernel 2.6.15). I
compiled it succesfully from CVS but it doen't work :(
It gives following errors:
[EMAIL PROTECTED]:~$ gmplayer
MPlayer dev-CVS-060215-22:00-4.0.3 (C) 2000-2006 MPlayer Team
AltiVec found
CPU: PowerPC
Linux RTC
Hello Michael,
Michael Schmitz <[EMAIL PROTECTED]> wrote:
>> > Regarding installation of mplayer-g4: you need to install first
>> > mplayer-powerpc then mplayer-g4 (dpkg craps out with a dependency loop
>> > otherwise).
>>
>> I did not have any such
> > > Regarding installation of mplayer-g4: you need to install first
> > > mplayer-powerpc then mplayer-g4 (dpkg craps out with a dependency loop
> > > otherwise).
> >
> > I did not have any such problems while installing mplayer-g4. So I am
> > not
> > Regarding installation of mplayer-g4: you need to install first
> > mplayer-powerpc then mplayer-g4 (dpkg craps out with a dependency loop
> > otherwise).
>
> I did not have any such problems while installing mplayer-g4. So I am
> not sure what you mean.
Might be
Michael Schmitz <[EMAIL PROTECTED]> writes:
> Regarding installation of mplayer-g4: you need to install first
> mplayer-powerpc then mplayer-g4 (dpkg craps out with a dependency loop
> otherwise).
I did not have any such problems while installing mplayer-g4. So I am
not sur
> > I am trying to play trailers from http://www.apple.com/trailers and
> > all I can hear is the audio.
> >
>
> btw, maybe you could try to download mplayer sources, then recreate the
> package by yourself... i'm using cvs version of mplayer and i can view
avi mkv work fine, ogg audio, mp3 audio
>
> I am trying to play trailers from http://www.apple.com/trailers and
> all I can hear is the audio.
>
btw, maybe you could try to download mplayer sources, then recreate the
package by yourself... i'm using cvs version of mplayer and i
can hear is the audio.
> you may just need to install the additional codecs
> from the mplayer unofficial repository. i recall
> that 'apt-get install mplayer' was fairly lean.
Unofficial repository? Do you mean marillat's?
Shreyas.
--
To UNSUBSCRIBE, email
powerpc is limited to what can be ported to powerpc
fortunately the only files ive ever had problems with
are very recent wmv files. all the mpeg4 type files
work fine, avi mkv work fine, ogg audio, mp3 audio
you may just need to install the additional codecs
from the mplayer unofficial
Is there a codecs package similar to w32codecs (in i386 repository) for ppc?
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
thanks, that fixed it.
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
On Sat, 2006-01-28 at 17:41 -0500, Shreyas Ananthan wrote:
> Hi,
>
> I tried to install the mplayer-g4 package from the following repository
>
> http://honk.sigxcpu.org/linux-ppc/debian/ mplayer/
>
> which is the repository specified at Marillat's webpage f
Hi,
I tried to install the mplayer-g4 package from the following repository
http://honk.sigxcpu.org/linux-ppc/debian/ mplayer/
which is the repository specified at Marillat's webpage for
mplayer. However, the installation fails because the package libpolyp0
is missing in both the off
On Mon, Oct 31, 2005 at 06:42:54PM +0100, Peter Plessas wrote:
> this might have been discussed before, but as i update the apt cache, i
> get an error/warning:
>
> W: GPG error honk.physik.uni-konstanz.de /mplayer Release The following
> signatures could not be verified because
Am Montag, den 31.10.2005, 18:42 +0100 schrieb Peter Plessas:
> this might have been discussed before, but as i update the apt cache, i
> get an error/warning:
>
> W: GPG error honk.physik.uni-konstanz.de /mplayer Release The following
> signatures could not be verified because
Dera List,
this might have been discussed before, but as i update the apt cache, i
get an error/warning:
W: GPG error honk.physik.uni-konstanz.de /mplayer Release The following
signatures could not be verified because the public key is not
available: NO_PUBKEY BDCE3370C88CEDF6
This
Hi all.
I would like to know if anyone use mplayer under debian testing PPC.
I can't install it because of dependency (?) problem.
Les paquets suivants contiennent des dépendances non satisfaites :
mplayer-g4: Dépend: libdirectfb-0.9-22 mais il n'est pas installable
On 08:38:02 02/Apr , Lee Braiden wrote:
> Just google for "codecs mplayer cook ppc" or something like that. If I
> recall
> correctly, there is an mplayer site with all the real codecs nicely bundled
> in an archive so you don't have to install the (crap, imho) Real
On Saturday 02 April 2005 01:21, Daniele Menozzi wrote:
> Hi all, I was trying to watch .rm movies with mplayer, on my ibook g3, but
> I get this error:
>
> Trying to force audio codec driver family libmad...
> Opening audio decoder: [realaud] RealAudio decoder
> opening shared o
Hi all, I was trying to watch .rm movies with mplayer, on my ibook g3, but
I get this error:
Trying to force audio codec driver family libmad...
Opening audio decoder: [realaud] RealAudio decoder
opening shared obj '/usr/lib/win32/cook.so.6.0'
Error: /usr/lib/win32/cook.so.6.0: cannot o
On Fri, 2005-03-11 at 23:27 +0100, Simon Vallet wrote:
> On Fri, 11 Mar 2005 17:23:04 -0500
> Tamas K Papp <[EMAIL PROTECTED]> wrote:
>
> > I tried to install mozilla-mplayer today, and of course it needs
> > mplayer-powerpc or mplayer-g4. Where can I find either of
Tamas K. Papp <[EMAIL PROTECTED]> writes:
> When I try to play a mov file, I get no sound, and mplayer says:
>
> Trying to force audio codec driver family libmad...
> Requested audio codec family [qdmc] (afm=qtaudio) not available.
> Enable it at compilation.
> Cannot fin
On Saturday 12 March 2005 02:08, Rainer Gutkas wrote:
> http://www.utv.at/direct.php?id=164
>
> It's a film completly made by me (the video is just a snapshot with a digi
> cam, the overlayed video effect was programmed by me, the music recorded
> mixed and cut by me and the guitar is also me ...)
On Fri, Mar 11, 2005 at 11:27:45PM +0100, Simon Vallet wrote:
> On Fri, 11 Mar 2005 17:23:04 -0500
> Tamas K Papp <[EMAIL PROTECTED]> wrote:
>
> > I tried to install mozilla-mplayer today, and of course it needs
> > mplayer-powerpc or mplayer-g4. Where can
On Fri, 11 Mar 2005 17:23:04 -0500
Tamas K Papp <[EMAIL PROTECTED]> wrote:
> I tried to install mozilla-mplayer today, and of course it needs
> mplayer-powerpc or mplayer-g4. Where can I find either of these? A
> sources.list line would be nice...
deb http://honk.physik.uni-k
Hi,
I tried to install mozilla-mplayer today, and of course it needs
mplayer-powerpc or mplayer-g4. Where can I find either of these? A
sources.list line would be nice...
Tamas
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
[EMAIL PROTECTED]> [2005-01-07 13:59 +0100]:
> > > > On Fri, Jan 07, 2005 at 12:11:22PM +0100, Sebastian Henschel wrote:
> > > > > yesterday, some mplayer-related packages had been updated and today i
> > > > > tried to watch a movie:
> >
22PM +0100, Sebastian Henschel wrote:
> > > > yesterday, some mplayer-related packages had been updated and today i
> > > > tried to watch a movie:
> > > Runs fine here of course. Can you dump the video somewhere for me to
> > > have a look?
> >
> > for inst
[EMAIL PROTECTED]> [2005-01-07 13:59 +0100]:
> > > > On Fri, Jan 07, 2005 at 12:11:22PM +0100, Sebastian Henschel wrote:
> > > > > yesterday, some mplayer-related packages had been updated and today i
> > > > > tried to watch a movie:
> >
22PM +0100, Sebastian Henschel wrote:
> > > > yesterday, some mplayer-related packages had been updated and today i
> > > > tried to watch a movie:
> > > Runs fine here of course. Can you dump the video somewhere for me to
> > > have a look?
> >
> > for inst
On Fri, Jan 07, 2005 at 05:01:40PM +0100, Sebastian Henschel wrote:
> re...
>
> * Guido Guenther <[EMAIL PROTECTED]> [2005-01-07 13:59 +0100]:
> > On Fri, Jan 07, 2005 at 12:11:22PM +0100, Sebastian Henschel wrote:
> > > yesterday, some mplayer-related package
re...
* Guido Guenther <[EMAIL PROTECTED]> [2005-01-07 13:59 +0100]:
> On Fri, Jan 07, 2005 at 12:11:22PM +0100, Sebastian Henschel wrote:
> > yesterday, some mplayer-related packages had been updated and today i
> > tried to watch a movie:
> Runs fine here of course
On Fri, Jan 07, 2005 at 12:11:22PM +0100, Sebastian Henschel wrote:
> yesterday, some mplayer-related packages had been updated and today i
> tried to watch a movie:
Runs fine here of course. Can you dump the video somewhere for me to
have a look?
> # mplayer video.avi
> mplayer:
howdy folks and Guido (i think)...
yesterday, some mplayer-related packages had been updated and today i
tried to watch a movie:
# mplayer video.avi
mplayer: error while loading shared libraries:
/usr/lib/libavcodec-cvs.so: R_PPC_REL24 relocation at 0x0f31f354 for
symbol `faacEncOpen' o
Helge Kreutzmann wrote:
Hello,
On Tue, Jan 04, 2005 at 12:45:02AM +0800, William Xuuu wrote:
Hi,
Does mplayer support '-vo fbdev2' on linux-ppc? When i try it,
'mplayer -vo fbdev2 *.avi', i get an error as follows. Any ideas?
I use directfb which works fine except
On Mon, 03 Jan 2005 the mental interface of
Helge Kreutzmann told:
> Hello,
> On Tue, Jan 04, 2005 at 12:45:02AM +0800, William Xuuu wrote:
> > Hi,
> >
> > Does mplayer support '-vo fbdev2' on linux-ppc? When i try it,
> > 'mplayer -vo fbdev2 *.avi&#
Hello,
On Tue, Jan 04, 2005 at 12:45:02AM +0800, William Xuuu wrote:
> Hi,
>
> Does mplayer support '-vo fbdev2' on linux-ppc? When i try it,
> 'mplayer -vo fbdev2 *.avi', i get an error as follows. Any ideas?
I use directfb which works fine except that I have to
Hi,
Does mplayer support '-vo fbdev2' on linux-ppc? When i try it,
'mplayer -vo fbdev2 *.avi', i get an error as follows. Any ideas?
(...etc...)
Playing 开场DV_RC2_3kbps.avi.
AVI file format detected.
VIDEO: [DIVX] 640x480 24bpp 25.000 fps 2989.2
On Fri, Oct 22, 2004 at 09:12:58AM -0400, Jeffrey Matt wrote:
> Tried it out this morning and everything is working beautifully. Thanks
> Guido.
Thanks for testing!
-- Guido
le it at compilation.
Requested audio codec family [divx] (afm=acm) not available.
Enable it at compilation.
Cannot find codec for audio format 0x161.
which seems to make sense given that the libavcodec is being disabled.
Any ideas? I don't know enough about how mplayer is structured to know
.
> Enable it at compilation.
> Cannot find codec for audio format 0x161.
>
> which seems to make sense given that the libavcodec is being disabled.
> Any ideas? I don't know enough about how mplayer is structured to know
> if this is a setup issue. (I guess I can just co
codec is being disabled.
Any ideas? I don't know enough about how mplayer is structured to know
if this is a setup issue. (I guess I can just compile the library
myself).
Thanks
Jeff
On 20-Oct-04, at 11:59 AM, Guido Guenther wrote:
On Wed, Oct 20, 2004 at 09:02:27AM -0400, Jeffrey
On Wed, Oct 20, 2004 at 09:02:27AM -0400, Jeffrey Matt wrote:
> Hi,
>
> Is anyone else having problems with the mplayer-powerpc from
> http://honk.physik.uni-konstanz.de? These builds have been working
> perfectly for me for a while now. There was an update yesterday that
>
Hi, I get the same error message on my Pismo, the only difference is
MPlayer interrupted by signal 4 in module: decode_video
and I got the packages from the same repository as you. I'm still
looking for a solution...
--
Pablo Gil <[EMAIL PROTECTED]>
Jeffrey Matt wrote:
Is anyone else having problems with the mplayer-powerpc from
http://honk.physik.uni-konstanz.de? These builds have been working
perfectly for me for a while now. There was an update yesterday that
I've installed and now I'm getting this error:
MPlayer inte
Hi,
Is anyone else having problems with the mplayer-powerpc from
http://honk.physik.uni-konstanz.de? These builds have been working
perfectly for me for a while now. There was an update yesterday that
I've installed and now I'm getting this error:
MPlayer interrupted by signal 4
Hi all,
has one build the new mplayer source successful?
My compile stops with:
usr/bin/make -C postproc
make[2]: Entering directory `/source/mplayer/mplayer-1.0pre5/postproc'
cc -c -I../libvo -I../../libvo -I/usr/X11R6/include -O4 -maltivec
-mabi=altivec -pipe -ffast-math -fomit-
Hello Ben,
* Benjamin Herrenschmidt <[EMAIL PROTECTED]> [2004-04-15 21:20:38 +1000]:
> [...]
> suppose something is wrong with your config. Can you try compiling the
> kernel with the default pmac_defconfig, just remove the "pmac zilog"
> driver ?
Now it is working.
Thank you for your help!
Mat
Hi Ben
* Benjamin Herrenschmidt <[EMAIL PROTECTED]> [2004-04-15 21:20:38 +1000]:
> [...]
> suppose something is wrong with your config. Can you try compiling the
> kernel with the default pmac_defconfig, just remove the "pmac zilog"
> driver ?
I will try it tonight.
Regards,
Matze
signature.as
On Thu, 2004-04-15 at 19:13, Matthias Kirschner wrote:
> Hello Ben,
> sorry for my bad description of the problem.
>
> * Benjamin Herrenschmidt <[EMAIL PROTECTED]> [2004-04-15 15:40:54 +1000]:
>
> > It would be more useful if you could explain what you mean by "crash"
> > _precisely_
> By crash,
Hello Ben,
sorry for my bad description of the problem.
* Benjamin Herrenschmidt <[EMAIL PROTECTED]> [2004-04-15 15:40:54 +1000]:
> It would be more useful if you could explain what you mean by "crash"
> _precisely_
By crash, I mean that X freeze and I can't do anything. I have to switch
off and
On Thu, 2004-04-15 at 02:52, Matthias Kirschner wrote:
> Hello,
> after installing kernel 2.6.5 my ibook crash when i execute mplayer,
> xine or kprinter (the only kde programm i have installed).
> I don't have a clue what is the problem.
>
> I have included my kernel c
Hello,
after installing kernel 2.6.5 my ibook crash when i execute mplayer,
xine or kprinter (the only kde programm i have installed).
I don't have a clue what is the problem.
I have included my kernel config. Hope someone can give me a hint.
Thank you
Matze
#
# Automatically generated
OoO En cette nuit nuageuse du mardi 28 octobre 2003, vers 00:15,
"Colin Leroy" <[EMAIL PROTECTED]> disait:
> Radeon's driver seems to do more than that (blocks near lines 437, 1079,
> 1106 seems strange).
For 1079, it is just a global shift of the picture. For 1106, it is in
a function that would
On Tue, Nov 04, 2003 at 12:37:47AM +0100, Soeren Sonnenburg wrote:
> sure,
> powerbook g4 15" + linux...
The trailers you are watching uses a different audio codec (which we
found out in private mail, thanks Soeren). However the current mplayer
packages can't handle that one
On Tue, 2003-11-04 at 15:27, Guido Guenther wrote:
> On Tue, Nov 04, 2003 at 03:07:09AM +0100, Paul TT wrote:
> > which we have on ppc :-)
> > fourcc are "a4pm" or mp4a, if you like...
> > or better, in the trailer i downloaded, it's that way! ;-)
> So maybe we're running different trailers. Can I
On Tue, Nov 04, 2003 at 03:07:09AM +0100, Paul TT wrote:
> which we have on ppc :-)
> fourcc are "a4pm" or mp4a, if you like...
> or better, in the trailer i downloaded, it's that way! ;-)
So maybe we're running different trailers. Can I find yours somewhere?
Mine has md5 36320671963e70b62de6348fad
OoO En cette nuit nuageuse du mardi 28 octobre 2003, vers 00:15,
"Colin Leroy" <[EMAIL PROTECTED]> disait:
> Maybe your best guess is to ask on mplayer's ML whether the driver should
> work on BE, then you'll have a better idea of where to search.
No answer :(
> Oh, perhaps it could depend on yo
On Mon, 3 Nov 2003 18:10:29 +0100
Guido Guenther <[EMAIL PROTECTED]> wrote:
> On Mon, Nov 03, 2003 at 06:12:53PM +0100, Guido Guenther wrote:
> > On Sun, Nov 02, 2003 at 08:46:39AM +0100, Soeren Sonnenburg wrote:
> > > Try mplayer-cvs ...
> > This is linux-ppc? Libfa
On Mon, 2003-11-03 at 18:12, Guido Guenther wrote:
> On Sun, Nov 02, 2003 at 08:46:39AM +0100, Soeren Sonnenburg wrote:
> > Try mplayer-cvs ...
> This is linux-ppc? Libfaad2 rc1 as well as mplayer CVS doen't seem to
> support this codec.
sure,
powerbook g4 15" + linux...
Soeren
On Mon, Nov 03, 2003 at 06:12:53PM +0100, Guido Guenther wrote:
> On Sun, Nov 02, 2003 at 08:46:39AM +0100, Soeren Sonnenburg wrote:
> > Try mplayer-cvs ...
> This is linux-ppc? Libfaad2 rc1 as well as mplayer CVS doen't seem to
> support this codec.
codecs.conf says:
au
On Sun, Nov 02, 2003 at 08:46:39AM +0100, Soeren Sonnenburg wrote:
> Try mplayer-cvs ...
This is linux-ppc? Libfaad2 rc1 as well as mplayer CVS doen't seem to
support this codec.
-- Guido
signature.asc
Description: Digital signature
#x27;em and you should be go.
> [...]
> > MPlayer is 1.0rc2, should be same as yours. Different platform though,
> > but I think your just missing the right codec.
>
> Correction: mplayer 1.0pre2 already has faad built-in support. Thus mplayer
> didn't use the codec I downlo
On Sun, 2 Nov 2003 00:57:33 +0100 (CET)
Wolfgang Pfeiffer <[EMAIL PROTECTED]> wrote:
> Hi Paul,
> Thanks for your answer.
>
pls :-)
> Hints?
>
maybe try uninstalling faad & libfaad, then recompile mplayer.
i don't have any *faad* package installed..
Hi
On Sun, Nov 02, 2003 at 10:59:24AM +0100, Joe Malik wrote:
[...]
> just played the trailer, works fine for me. I've installed to codecs
> from www.mplayerhq.hu . Grab 'em and you should be go.
[...]
> MPlayer is 1.0rc2, should be same as yours. Different platform though,
>
On Fri, Oct 31, 2003 at 10:01:44PM +0100, Wolfgang Pfeiffer wrote:
[...]
> I'd like to play a .mov file [Matrix trailer] with mplayer.
> On Gnome 2.4
[...]
just played the trailer, works fine for me. I've installed to codecs
from www.mplayerhq.hu . Grab 'em and you shou
On Sun, 2003-11-02 at 00:57, Wolfgang Pfeiffer wrote:
> mplayer -vo xv -ao oss -double -framedrop -ac faad revolutions_640_dl.mov
>
> Excerpt [short] from the output messages:
> FAAD: Failed to initialize the decoder!
> ADecoder init failed :(
> ADecoder init failed :(
> [.
Hi Paul,
Thanks for your answer.
On Sat, 1 Nov 2003, Paul TT wrote:
> On Fri, 31 Oct 2003 22:41:03 +0100 (CET)
> Wolfgang Pfeiffer <[EMAIL PROTECTED]> wrote:
>
> > On Fri, 31 Oct 2003, Wolfgang Pfeiffer wrote:
> >
> > > Hi,
> > >
> > > I&#x
On Fri, 31 Oct 2003 22:41:03 +0100 (CET)
Wolfgang Pfeiffer <[EMAIL PROTECTED]> wrote:
> On Fri, 31 Oct 2003, Wolfgang Pfeiffer wrote:
>
> > Hi,
> >
> > I'd like to play a .mov file [Matrix trailer] with mplayer.
> > On Gnome 2.4
>
> ... should
On Fri, 31 Oct 2003, Wolfgang Pfeiffer wrote:
> Hi,
>
> I'd like to play a .mov file [Matrix trailer] with mplayer.
> On Gnome 2.4
... should say: playing it with *sound*: so far the video plays, but
without sound.
I get this error message when I try to play the file:
"
Hi,
I'd like to play a .mov file [Matrix trailer] with mplayer.
On Gnome 2.4
Mplayer is from
http://honk.physik.uni-konstanz.de/~agx/linux-ppc/debian/ mplayer/
System:
2.4.22-ben2, 3.0.r1 testing/unstable
Installed (and much more for mplayer; here just the listings that I
thought cou
OoO En cette nuit nuageuse du mardi 28 octobre 2003, vers 00:15,
"Colin Leroy" <[EMAIL PROTECTED]> disait:
> Maybe your best guess is to ask on mplayer's ML whether the driver should
> work on BE, then you'll have a better idea of where to search.
I have tried on "user", I will try on -dev.
> Oh
1 - 100 of 156 matches
Mail list logo
