Michel Dänzer a écrit :
> On Thu, 2007-07-26 at 19:50 +0200, Philippe Hupé wrote:
>
>> I have tried to upgrade xserver-xorg to 7.2 but when launch X (startx --
>> -layout DualScreen) only the Laptop screen is actived.
>> It works with xorg 7.1.
>>
>> I attached my xorg.conf .
>>
>
> Looks l
On Thu, 2007-07-26 at 19:50 +0200, Philippe Hupé wrote:
>
> I have tried to upgrade xserver-xorg to 7.2 but when launch X (startx --
> -layout DualScreen) only the Laptop screen is actived.
> It works with xorg 7.1.
>
> I attached my xorg.conf .
Looks like there's quite a bit of redundancy in th
have an idea?
>
> Thanks in Advance.
>
> Philippe
>
>
> Debian testing
> kernel 2.6.21
> (PowerBook G4 15")
> VGA compatible controller: ATI Technologies Inc RV350 [Mobility Radeon
> 9600 M10]
Hi,
http://wiki.debian.org/XStrikeForce/ReleaseNotes
they docum
Dear All,
I have tried to upgrade xserver-xorg to 7.2 but when launch X (startx --
-layout DualScreen) only the Laptop screen is actived.
It works with xorg 7.1.
I attached my xorg.conf .
Does anyboby have an idea?
Thanks in Advance.
Philippe
Debian testing
kernel 2.6.21
(PowerBook G4 15
Selon Vincent Lefevre <[EMAIL PROTECTED]>:
> On 2006-10-24 14:43:33 +0200, Mathieu Rigard wrote:
> > I have see my /var/log/Xorg.0.log.
> > I have :
> > (WW) .../fonts/... directory does not exist (for all my fonts).
>
> I had something similar after the upgrade to Xorg on my PowerBook G4
> and X
On 2006-10-24 14:43:33 +0200, Mathieu Rigard wrote:
> I have see my /var/log/Xorg.0.log.
> I have :
> (WW) .../fonts/... directory does not exist (for all my fonts).
I had something similar after the upgrade to Xorg on my PowerBook G4
and X couldn't work at all, but this was due to user settings.
Yves-Alexis Perez a écrit :
On Tue, 2006-10-24 at 09:34 +0200, Mathieu Rigard wrote:
Hi there,
I've just install Debian Etch on my Powerbook G4 800MHz. Netinstall
with
video=ofonly whas ok and all sims to be ok but when Etch try to enter
runlevel 5 and start x, my screen turn ok and black.
On Tue, 2006-10-24 at 09:34 +0200, Mathieu Rigard wrote:
> Hi there,
> I've just install Debian Etch on my Powerbook G4 800MHz. Netinstall
> with
> video=ofonly whas ok and all sims to be ok but when Etch try to enter
> runlevel 5 and start x, my screen turn ok and black.
> I can't go in a shell
Maybe nobody here have a Powerbook with Debian in it ?
En Français plus bas...
Hi there,
I've just install Debian Etch on my Powerbook G4 800MHz. Netinstall with
video=ofonly whas ok and all sims to be ok but when Etch try to enter
runlevel 5 and start x, my screen turn ok and black.
I can't
Bonjour à tous, (in english above)
je viens d'installer Debian Testing (Etch) grace à l'installeur
Netinstall sur mon Titanium G4 800 MHz (ATI M7 32 Mo) et tous mes logs
semblent bon au démarrage (Yaboot OK, merci !) et au moment de lancer le
serveur X (et gnome), vlan ! plus rien ... L'écran n
On Tue, 2006-09-19 at 06:41 +, Soeren Sonnenburg wrote:
> rationale, I regularly switch between two configurations, single
> laptop internal display + laptop with external display and am now
> getting
> annoyed by always having to xrandr -s 0 / xrandr -s1 ...
And xrandr doesn't seems to work
On Tue, 2006-09-19 at 06:41 +, Soeren Sonnenburg wrote:
>
> while we are at it, would it be possible to automagically detect 'hey it
> is monitory XY attached so I am switching to the right resolution' like
> osx does ?
>
> rationale, I regularly switch between two configurations, single
> la
On 9/19/06, Soeren Sonnenburg <[EMAIL PROTECTED]> wrote:
On Sat, 16 Sep 2006 01:15:50 +, Benjamin Herrenschmidt wrote:
> On Fri, 2006-09-15 at 15:31 +0200, Michel Dänzer wrote:
>> On Fri, 2006-09-15 at 14:51 +0200, Yves-Alexis Perez wrote:
>> >
>> > I'm trying to use the dvi output (without
On Sat, 16 Sep 2006 01:15:50 +, Benjamin Herrenschmidt wrote:
> On Fri, 2006-09-15 at 15:31 +0200, Michel Dänzer wrote:
>> On Fri, 2006-09-15 at 14:51 +0200, Yves-Alexis Perez wrote:
>> >
>> > I'm trying to use the dvi output (without vga adaptor) on my mac. It
>> > works well if (on the same
On Fri, 2006-09-15 at 15:31 +0200, Michel Dänzer wrote:
> On Fri, 2006-09-15 at 14:51 +0200, Yves-Alexis Perez wrote:
> >
> > I'm trying to use the dvi output (without vga adaptor) on my mac. It
> > works well if (on the same screen) I use the vga adaptor, but when I use
> > a dvi cable (working o
On Fri, 2006-09-15 at 14:51 +0200, Yves-Alexis Perez wrote:
>
> I'm trying to use the dvi output (without vga adaptor) on my mac. It
> works well if (on the same screen) I use the vga adaptor, but when I use
> a dvi cable (working on osx), it suddenly doesn't work anymore. Well,
> Xorg detects it,
Hi list,
I'm trying to use the dvi output (without vga adaptor) on my mac. It
works well if (on the same screen) I use the vga adaptor, but when I use
a dvi cable (working on osx), it suddenly doesn't work anymore. Well,
Xorg detects it, and adjust the pseudo xinerama mode, but nothing is
displaye
> tibooks work already, aluminium are the one that don't.
I've been struggling with sleep on my TiBook 550 for many many months.
The screen just stays black when the system wakes up. Would you be so
kind out as to spell out for me exactly what the magic combination is
using a 2.6 kernel? ie: wha
On Fri, 2004-10-22 at 11:07, sean wrote:
> > tibooks work already, aluminium are the one that don't.
> I've been struggling with sleep on my TiBook 550 for many many months.
> The screen just stays black when the system wakes up. Would you be so
> kind out as to spell out for me exactly what the m
On Thu, 2004-10-21 at 00:37, Guglielmo Dapavo wrote:
> .
> |
> | 1. Sleep. When I close lid, backlight turns off, if I reopen it
> | right away, it will turn back on as expected, however if I wait for
> | few minutes, and then open the lid, pbook won't wake up. I've seen
> | quite a few messages
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
Kirill Lapshin wrote:
| Hello,
|
| I am new to this port; please be gentle.
|
| I just got my new shining pbook 15", installed sarge on it using
| pre-rc2 debian installer, and most of the things worked just fine
| out of box, which impressed me a lo
Hello,
I am new to this port; please be gentle.
I just got my new shining pbook 15", installed sarge on it using pre-rc2
debian installer, and most of the things worked just fine out of box,
which impressed me a lot. Great work!
However there are few things that don't work for me.
1. Sleep.
On Apr 1, 2004, at 11:06 PM, Federico Gamio wrote:
On Thu, 2004-04-01 at 22:36, Barry Hawkins wrote:
List,
I have been trying to get XFree86 running on my system for several
days. I have been scouring our archives and some others, which has
helped me rule out a number of issues. To da
On Thu, 2004-04-01 at 22:36, Barry Hawkins wrote:
> List,
> I have been trying to get XFree86 running on my system for several
> days. I have been scouring our archives and some others, which has
> helped me rule out a number of issues. To date, my core issue seems to
> be that my XFree8
List,
I have been trying to get XFree86 running on my system for several
days. I have been scouring our archives and some others, which has
helped me rule out a number of issues. To date, my core issue seems to
be that my XFree86 installation does not recognize my video card. I
have attemp
Hi,
I have an Apple PowerBook G4 15" 1.25 Ghz and I posted at
http://isadora.homelinux.net/debian/powerboook/
all the stuff needed to make this toy work with Debian.
You can find there my last 2.6 kernel (images and source in Debian
Package), sources.list for apt, XF86Config for XFree
On Sun, 2003-08-31 at 18:50, Paul van Tilburg wrote:
>
> My only remaining problem is XFree86. I added the drm-trunk-sid
> repository to my sources.list, installed the packages as instructed on
> Christophe's page, and used his XF86Config-4. XFree86 works, but the
> desktop looks `yellowish', if I
Hi!
Today I've been installing Debian GNU/Linux sid on my new Powerbook G4
15". I've got most things working, thanks for all the help, archives,
tutorials, etc. I followed the directions of Christophe's page the most
(http://www.cattlegrid.net/~christophe/titanium).
Since I
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
> > yes... writing a mail from a G4 PB 15" ...
Great!! ;-)
> > it does no get as hot as the 12" one, i.e. the front (where the akku/hd
> > is located) stays cool all the time... however on the back it can become
> > really hot... ...
>
> I can second
On Thursday 12 June 2003 08:33, Soeren Sonnenburg wrote:
> it does no get as hot as the 12" one, i.e. the front (where the akku/hd
> is located) stays cool all the time... however on the back it can become
> really hot... ...
I can second that. Only if I compile the kernel the back gets so hot I
c
> Hi!
>
> I am thinking in buy an Apple laptop. I know iBook G3 14" is a very
good
> machine, lightweight, small, cold, very cool ;-), and Linux work fine
on it.
> But i don't know anything about PB G4 15"
> (http://www.apple.com/powerbook/index15.html), so i have a few
questions
> before go to the
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
Hi!
I am thinking in buy an Apple laptop. I know iBook G3 14" is a very good
machine, lightweight, small, cold, very cool ;-), and Linux work fine on it.
But i don't know anything about PB G4 15"
(http://www.apple.com/powerbook/index15.html), so i
32 matches
Mail list logo
