Brice Goglin wrote:
> Could somebody have a look at bug #415543? Rob has a strange problem on
> his PowerMac. Basically, Xorg and network cannot work at the same time.
> I suspect a hardware or kernel problem, but I am not familiar enough
> with powerpc to debug further. Help would be appreciated.
Charles Plessy wrote:
> Thanks for the hint. I added the following line in xorg.conf:
>
> ModeLine"1920x1200" 138 1920 2048 2256 2592 1200 1201 1204
> 1242
>
> Howerver, I can not go lower than 138 (it freezes the system), and it is still
> too high to solve the problem. I also a
Charles Plessy wrote:
> Le Fri, Apr 27, 2007 at 10:22:21PM -0400, Wakko Warner a ?crit :
> > Yes, I had this with a radeon 9200 on a PC and a 1600x1200 LCD connected via
> > DVI (Did not occur with VGA). I had to tell xorg to ignore edid and I
> > modified each mode li
Charles Plessy wrote:
> I have just installed Etch on a powermac7,3 with a cinema display, but
> very unfortunately, the screen flickers, making it difficult to work
> with the computer.
>
> I have found a hint on the fglrx page
> (http://www.stanchina.net/~flavio/debian/fglrx-installer.html): it
[EMAIL PROTECTED] wrote:
> > Here is the string I used on a 56k sportster at work:
> > AT&F&C1&D2S11=50&B1
> >
> > I believe &B1 is the part that makes it work for me. S11=50 makes the
> > modem
> > dial as fast as it can. You may not want this especially if your phone co
> > can't handle it.
> >
[EMAIL PROTECTED] wrote:
> > If this USR is a sportster, that is an init string that you need to give
> > it
> > or you will run into problems like this. I don't remember what it was off
> > the top of my head, but it is the modem (according to past experiences
> > with
> > USR modems)
>
> It is
Jeffrey Rolland wrote:
> Hello, all!
>
> I have a Power Macintosh 7500 running Debian Sarge. I have a US
> Robotics 56.6K modem.
>
> When I try to dial up, Debian gets the modem to dial, and the modem
> negotiates a connection, but then the remote computer can't hear
> anything Debian says,
Sorry for the long delay. I have not touched the mac until today. Also,
noone else on the powerpc list responded.
brian wrote:
> hi, i also have a beige currently running
> sarge/2.6.8-3/Xfree4.3 -- procrastinating
> on the upgrade although i have already done
> on two other ppc/macs (one old
I am not subscribed to this list, please always CC me.
X worked on this machine until I added an ethernet card. Seems X wants to
use the I/O ports for the ethernet card and not for the ATI card. I don't
have the Xorg log for when it worked. Apparently, it does not matter which
type of ethernet
9 matches
Mail list logo
