hi,
I am very thankful for your help :)
Did you means that the powerpcspe unoffical port only transplant the packages
instead of building a complete release edition? I must find a kernel by myself?
If so, could you tell me how to install debian on my board?
I am very sorry that I am not familiar
* Bear | 2010-09-15 21:02:21 [+0800]:
>hi,
Hi,
>thx for your answers!!!
no problem.
>It looks like there no a special mailling list for this port(PowerPCSPEPort)
>and it looks like a non-offical supported architecture. Is there any
>downloads available?
arm/armel share the same mailinglist a
* Michel Dänzer [100915 16:17 +0200]:
[...]
> Looks like you have zsh's CLOBBER option disabled. Nello explained the
> rest.
Can be bypassed bei 'echo >| blo' instead of 'echo > blo'.
Elimar
--
Learned men are the cisterns of knowledge,
not the fountainheads ;-)
--
To UNSUBSCRIBE, email
On Mit, 2010-09-15 at 16:00 +0200, Elimar Riesebieter wrote:
> * nello martuscielli [100915 14:26 +0200]:
> [...]
> > @Elimar
> >
> > you cannot overwrite but you can tune it.
> > e.g. to use the led to blink when your airport ext. receives something:
> >
> > # echo phy0rx > /sys/class/leds/pmu-
On Wed, Sep 15, 2010 at 4:00 PM, Elimar Riesebieter wrote:
> * nello martuscielli [100915 14:26 +0200]:
> [...]
>> @Elimar
>>
>> you cannot overwrite but you can tune it.
>> e.g. to use the led to blink when your airport ext. receives something:
>>
>> # echo phy0rx > /sys/class/leds/pmu-led\:\:fro
* nello martuscielli [100915 14:26 +0200]:
[...]
> @Elimar
>
> you cannot overwrite but you can tune it.
> e.g. to use the led to blink when your airport ext. receives something:
>
> # echo phy0rx > /sys/class/leds/pmu-led\:\:front/trigger
zsh: file exists: /sys/class/leds/pmu-led::front/trigger
On Wed, Sep 15, 2010 at 12:14:38PM +0200, Elimar Riesebieter wrote:
> * Cédric Boutillier [100915 18:14 +0900]:
> >
> > class/leds/pmu-led::front/trigger = ide-disk
> That doesn't work
> > You can also write 'disk' directly to the (pseudo)file
> > /sys/class/leds/pmu-led::front/trigger, but it w
hi,
thx for your answers!!!
It looks like there no a special mailling list for this port(PowerPCSPEPort)
and it looks like a non-offical supported architecture. Is there any downloads
available?
If this port is stable enough(Less kernel panic, support most software such
iscdhcpd, bind and so on
>> The front led of my mid 2005 iBook is showing the PATA disk activity
>> after I added the following line to /etc/sysfs.conf
>>
>> class/leds/pmu-led::front/trigger = ide-disk
>>
>> and then restarted the /etc/init.d/sysfsutils service (from sysfsutils
>> package).
>
> That doesn't work
>
>> You
* Bear | 2010-09-15 13:37:16 [+0800]:
>And also, is there any FreeScale's processor can run debian-powerpc? thx!
The e300 core based cpus like 5200, 512x,.. can run debian-powerpc as
it. There is an overview at [0]
[0] http://www.freescale.com/webapp/sps/site/overview.jsp?code=POWER_ARCH_5XXX
S
* Cédric Boutillier [100915 18:14 +0900]:
> Hi,
>
> On Wed, Sep 15, 2010 at 01:07:51AM +0200, Benjamin Cama wrote:
> > Managing leds is done through /sys nowadays. I don't have my powerbook
> > at hand so I don't know the exact entries, but look
> > into /sys/class/leds. One directory should corre
Hi Bear.
I have been running Debian for years on the following embedded PowerPCs:
MPC60x (rather old)
MPC7457
MPC8540
The MPC8540 has an e500 Version1 core, which is compatible with
older PowerPCs, at the condition that FP instructions are emulated in
the kernel, because it
Hi,
On Wed, Sep 15, 2010 at 01:07:51AM +0200, Benjamin Cama wrote:
> Managing leds is done through /sys nowadays. I don't have my powerbook
> at hand so I don't know the exact entries, but look
> into /sys/class/leds. One directory should correspond to the front led,
> and will have a trigger entr
On Die, 2010-09-14 at 22:01 +0200, Elimar Riesebieter wrote:
> * Mich Lanners [100914 21:15 +0200]:
> > Hello,
> >
> > On 14 Sep, this message from Elimar Riesebieter echoed through
> > cyberspace:
> > > does one know ho wto get the front led triggering on pata HD
> > > aktivity? This is on my P
On Die, 2010-09-14 at 22:26 +0200, drz wrote:
> Am Dienstag 14 September 2010, 22:04:31 schrieb drz:
> > OK, now I fixed some things I guess:
>
> Too soon, I just tried out glxgears and the machine crashed completely, no
> chance to ssh into the machine. And no relevant entries in syslog...
Ben
On Die, 2010-09-14 at 21:20 +0200, drz wrote:
>
> [ 24.987575] radeon :00:10.0: putting AGP V2 device into 4x mode
Due to an issue Benjamin Herrenschmidt is working on fixing, you
probably need radeon.agpmode=1 for now.
--
Earthling Michel Dänzer |http://www.vm
On 2010-09-15, Bear wrote:
> I wanna build a network device with FreeScale MPC8533E PowerQUICC
> III Processor chipset. But I dont know if the powerpc edition of
> debian can run on it or not. Is there anyone who can tell me the
> answer? Or, if the powerpc edition of debian is only for Apple's
>
17 matches
Mail list logo
