Hello,
On Mon, 4 Dec 2000, Craig Laird wrote:
> things seem to go well until 'Loading PCMCIA Services: modules' when
> the system hangs. I don't have any PCMCIA cards in. Lil' help? -Craig
check out your config.opts in /etc/pcmcia. In the I/O range of that config
sits maybe another device. I h
Hello,
On Fri, 8 Dec 2000, dude wrote:
> i have the same problem, i wish i could check etc/pcmcia
> but i it hangs and i cant do anything with it.
> what do you suggest?
well, you've got 2 options.
1st option is you change it during the installation. You press alt-F2,
then you get a console, th
Hello,
A third option might be that you get some resque floppy's and boot
them. Then mount your harddisk and make the changes...
On Sat, 9 Dec 2000, Jo Geraerts wrote:
> Hello,
>
> On Fri, 8 Dec 2000, dude wrote:
> well, you've got 2 options.
> 1st option is
Hello,
On Thu, 28 Dec 2000, Michelle Murrain wrote:
> The generic tulip failed during the install. Then, in trying their tulip - I
> put thier tulip.o into /lib/modules/2.2.17/net, and added the line:
Maybe you can get it working with the ne2000 driver.
Greetz,
Jo
Hello,
On Mon, 1 Jan 2001, [EMAIL PROTECTED] wrote:
> http://www.asus.com.tw/Products/notebook/s8200a/spec.html
i've got kinda the same.
> INIT: Entering runlevel: 2
> Starting system log daemon: syslogd klogd.
> Starting PCMCIA services: modules cardmgr.
Try to boot up with a rescue disk. Th
Hello,
is there anyone out there who has got XFree 3.3.6 running on a smi
lynx3dm chip? According to the driver status on xfree86.org, this chip is
supported. But i don't get it to work.
Currently i'm using the framebuffer
server. This works, but the graphics are slow.
Anyone who can help me out?
Hello,
On Thu, 4 Jan 2001, Jeffrey S. Coppock wrote:
> Jan 4 07:36:20 localhost kernel: parport0: PC-style at 0x378 (0x778), irq 7,
> dma 3 [SPP,ECP,ECPPS2]
> Jan 4 07:36:21 localhost kernel: parport_probe: succeeded
> Jan 4 07:36:21 localhost kernel: parport0: Printer, HEWLETT-PACKARD DESKJE
Hello,
On Fri, 5 Jan 2001, Jeffrey S. Coppock wrote:
> I tried the echo redirect below and was told 'permission denied', so I
> tried it as root and it worked, the printer printed the message.
> I chmod 0666 /dev/lp0 and it worked without su.
So it isn't the kernel config that's wrong.
> The l
Hello,
On Thu, 4 Jan 2001, Nate Bargmann wrote:
> I am looking for a method to archive a bunch of stuff off of a couple
> different computers and since one is a laptop and one a desktop, it
> seems a parallel attached CDR drive might be the answer (I'm not
> enthused about Zip or Iomega drives).
Hello
On Sat, 6 Jan 2001, David Reviejo wrote:
> > I chmod 0666 /dev/lp0 and it worked without su.
> Don't do this. The /dev/lp? devices are 0660 by default, with group
> "lp"; you only need to add the user who need to use the printer
> to the "lp" group (this work too for another devices: group
Hello,
On Sat, 6 Jan 2001, Jeffrey S. Coppock wrote:
> lprng several times, I decided to try lpr. LPR WORKS! I don't know
> what the difference is, but it's enough. I reinstalled magicfilter
Great. But i'm still wondering what whet wrong with lprng. In that
previous mail with the result of the
Hello,
Can anyone tell me where i can find deb's for xfree 4.x for potato?
i wasn't able to find any info at the debian site. plse help me out.
greetz,
Jo
Hello,
On Tue, 13 Feb 2001, Jonathan Chang wrote:
> My laptop is ASUS 7300 equipped with SMI 910 lynx
> chip. Recently I upgraded XF4.0 to XF4.0.2, but the system hung after
> "starx". Anyone has similar experiences??
are you using framebuffers, maybe u should try to disalbe them.
Greetz
Hello,
On Sat, 24 Feb 2001, Sebastian Schaffert wrote:
> Yes, I have the same laptop and the same problem with all 4.0 versions I
> tried.
> I submitted a bug report to XFree86 about 2 or 3 months ago, but didn't get an
> answer yet.
It works on my 7300 with 4.0.2 and the siliconmotion driver.
Hello,
> I tried to set the vga=770 in lilo.conf but nothing happens, and I get an
> error:
Try vga=0x770. These are hexadecimal nr's, not decimal.
Greetz,
Jo
Hello
On Mon, 26 Feb 2001, Bruno Waes wrote:
> i have a sony vaio f180 and i have a working X4, only my alps pad is
> broken so i need to use a external mouse i have a ps2 and a serial
> any idea what is wrong ?
Maybe you must disable the pad in your bios?
Greetz,
Jo
Hello,
On Mon, 26 Feb 2001, Jacob Meuser wrote:
> Say what? For 800x600x16bpp in the framebuffer mode use
> vga=788 (in decimal)
> OR
> vga=0x314 (in hex)
hmmz, in the doc i read they only mentioned hexadecimal nr's to set up
framebuffers.
Greetz,
Jo
Hello,
On Mon, 4 Dec 2000, Craig Laird wrote:
> things seem to go well until 'Loading PCMCIA Services: modules' when
> the system hangs. I don't have any PCMCIA cards in. Lil' help? -Craig
check out your config.opts in /etc/pcmcia. In the I/O range of that config
sits maybe another device. I
Hello,
On Fri, 8 Dec 2000, dude wrote:
> i have the same problem, i wish i could check etc/pcmcia
> but i it hangs and i cant do anything with it.
> what do you suggest?
well, you've got 2 options.
1st option is you change it during the installation. You press alt-F2,
then you get a console, t
Hello,
A third option might be that you get some resque floppy's and boot
them. Then mount your harddisk and make the changes...
On Sat, 9 Dec 2000, Jo Geraerts wrote:
> Hello,
>
> On Fri, 8 Dec 2000, dude wrote:
> well, you've got 2 options.
> 1st option is
Hello,
On Thu, 28 Dec 2000, Michelle Murrain wrote:
> The generic tulip failed during the install. Then, in trying their tulip - I
> put thier tulip.o into /lib/modules/2.2.17/net, and added the line:
Maybe you can get it working with the ne2000 driver.
Greetz,
Jo
--
To UNSUBSCRIBE, ema
Hello,
On Mon, 1 Jan 2001, [EMAIL PROTECTED] wrote:
> http://www.asus.com.tw/Products/notebook/s8200a/spec.html
i've got kinda the same.
> INIT: Entering runlevel: 2
> Starting system log daemon: syslogd klogd.
> Starting PCMCIA services: modules cardmgr.
Try to boot up with a rescue disk. T
Hello,
is there anyone out there who has got XFree 3.3.6 running on a smi
lynx3dm chip? According to the driver status on xfree86.org, this chip is
supported. But i don't get it to work.
Currently i'm using the framebuffer
server. This works, but the graphics are slow.
Anyone who can help me out
Hello,
On Thu, 4 Jan 2001, Jeffrey S. Coppock wrote:
> Jan 4 07:36:20 localhost kernel: parport0: PC-style at 0x378 (0x778), irq 7, dma 3
>[SPP,ECP,ECPPS2]
> Jan 4 07:36:21 localhost kernel: parport_probe: succeeded
> Jan 4 07:36:21 localhost kernel: parport0: Printer, HEWLETT-PACKARD DESKJE
Hello,
On Fri, 5 Jan 2001, Jeffrey S. Coppock wrote:
> I tried the echo redirect below and was told 'permission denied', so I
> tried it as root and it worked, the printer printed the message.
> I chmod 0666 /dev/lp0 and it worked without su.
So it isn't the kernel config that's wrong.
> The
Hello,
On Thu, 4 Jan 2001, Nate Bargmann wrote:
> I am looking for a method to archive a bunch of stuff off of a couple
> different computers and since one is a laptop and one a desktop, it
> seems a parallel attached CDR drive might be the answer (I'm not
> enthused about Zip or Iomega drives)
Hello
On Sat, 6 Jan 2001, David Reviejo wrote:
> > I chmod 0666 /dev/lp0 and it worked without su.
> Don't do this. The /dev/lp? devices are 0660 by default, with group
> "lp"; you only need to add the user who need to use the printer
> to the "lp" group (this work too for another devices: grou
Hello,
On Sat, 6 Jan 2001, Jeffrey S. Coppock wrote:
> lprng several times, I decided to try lpr. LPR WORKS! I don't know
> what the difference is, but it's enough. I reinstalled magicfilter
Great. But i'm still wondering what whet wrong with lprng. In that
previous mail with the result of th
Hello,
Can anyone tell me where i can find deb's for xfree 4.x for potato?
i wasn't able to find any info at the debian site. plse help me out.
greetz,
Jo
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
Hello,
On Tue, 13 Feb 2001, Jonathan Chang wrote:
> My laptop is ASUS 7300 equipped with SMI 910 lynx
> chip. Recently I upgraded XF4.0 to XF4.0.2, but the system hung after
> "starx". Anyone has similar experiences??
are you using framebuffers, maybe u should try to disalbe them.
Greet
Hello,
On Sat, 24 Feb 2001, Sebastian Schaffert wrote:
> Yes, I have the same laptop and the same problem with all 4.0 versions I tried.
> I submitted a bug report to XFree86 about 2 or 3 months ago, but didn't get an
> answer yet.
It works on my 7300 with 4.0.2 and the siliconmotion driver. If
Hello,
> I tried to set the vga=770 in lilo.conf but nothing happens, and I get an
> error:
Try vga=0x770. These are hexadecimal nr's, not decimal.
Greetz,
Jo
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
Hello
On Mon, 26 Feb 2001, Bruno Waes wrote:
> i have a sony vaio f180 and i have a working X4, only my alps pad is
> broken so i need to use a external mouse i have a ps2 and a serial
> any idea what is wrong ?
Maybe you must disable the pad in your bios?
Greetz,
Jo
--
To UNSUBSCRIBE, em
Hello,
On Mon, 26 Feb 2001, Jacob Meuser wrote:
> Say what? For 800x600x16bpp in the framebuffer mode use
> vga=788 (in decimal)
> OR
> vga=0x314 (in hex)
hmmz, in the doc i read they only mentioned hexadecimal nr's to set up
framebuffers.
Greetz,
Jo
--
To UNSUBSCRIBE, email to [EMAIL PRO
--- Begin Message ---
Hello everybody,
I've got a weird ssh problem here.
i can't login with ssh on [EMAIL PROTECTED] (host1=D577FF3DDF.kabel.telenet.be
or kcnet.dnsalias.org) ssh doesn't ask for a password.
note: sshd on host1 is running on port because the provider blocks
all ports <1024
2002 at 06:35:55PM +0200, Jo Geraerts wrote:
> oh, that's not so good, mine says
> debug1: identity file /home/heather/.ssh/identity type 0
> debug1: identity file /home/heather/.ssh/id_rsa type 1
> debug1: identity file /home/heather/.ssh/id_dsa type -1
> So I'd interpret
Hello,
I'm unable to change the fonts of gnome-terminal. The current
font it uses is to big to fit multiple terminals on my desktop.
I can change the font in the profile editor, but the changes
don't take effect. When i take a loot in
~/.gconf/apps/gnome-terminal/profiles/Default/%gconf.xml
i ca
--- Begin Message ---
Hello everybody,
I've got a weird ssh problem here.
i can't login with ssh on jgeraert@host1. (host1=D577FF3DDF.kabel.telenet.be or
kcnet.dnsalias.org) ssh doesn't ask for a password.
note: sshd on host1 is running on port because the provider blocks
all ports <102
2002 at 06:35:55PM +0200, Jo Geraerts wrote:
> oh, that's not so good, mine says
> debug1: identity file /home/heather/.ssh/identity type 0
> debug1: identity file /home/heather/.ssh/id_rsa type 1
> debug1: identity file /home/heather/.ssh/id_dsa type -1
> So I'd interpret
Hello,
I'm unable to change the fonts of gnome-terminal. The current
font it uses is to big to fit multiple terminals on my desktop.
I can change the font in the profile editor, but the changes
don't take effect. When i take a loot in
~/.gconf/apps/gnome-terminal/profiles/Default/%gconf.xml
i ca
40 matches
Mail list logo
