Hello,
I bought a Netgear WG511U which is supported by the madwifi-driver.
I created a file /etc/pcmcia/atheros.conf which is included by
/etc/pcmcia/config:
device "atheros"
class "network" module "ath_pci"
card "Atheros WiFi Card"
manfid 0x0271, 0x0012
bind "atheros"
But if I insert the card
Hi,
I tried to get sarge work on my Siemens Mobile 501, a laptop with a
PII 266, 96MB RAM, 4 GB harddrive, ESS 1869-soundchip and Neomagic
NM2160 graphics-chipset.
After some troubles (the sb.o- module of bf24, 2.4.20-686 etc. only
accept irq 7) I got the soundchip working, it plays fine with
Hi,
I tried to get sarge work on my Siemens Mobile 501, a laptop with a
PII 266, 96MB RAM, 4 GB harddrive, ESS 1869-soundchip and Neomagic
NM2160 graphics-chipset.
After some troubles (the sb.o- module of bf24, 2.4.20-686 etc. only
accept irq 7) I got the soundchip working, it plays fine with
Bernhard Kleine <[EMAIL PROTECTED]> wrote:
>i have a similar soundchip and use the sb.o module. When i ran
>sndconfig, it asked for the IRQ and i sayed 5. Now I have an error
>message on my display during boot time, but the sound works perfectly
>under X.
What error-message? Does it run on the s
Bernhard Kleine <[EMAIL PROTECTED]> wrote:
>>
>> What error-message? Does it run on the same IRQ as lp0?
>>
>sb: Interrupt test on IRQ7 failes - Probable IRQ conflict
>
>-- probably not, but I am not shure, on the laptop CUPS has not been
>tested since the sound started to work
When I set the
Hi,
I tried to get sarge work on my Siemens Mobile 501, a laptop with a
PII 266, 96MB RAM, 4 GB harddrive, ESS 1869-soundchip and Neomagic
NM2160 graphics-chipset.
After some troubles (the sb.o- module of bf24, 2.4.20-686 etc. only
accept irq 7) I got the soundchip working, it plays fine with
Hi,
I tried to get sarge work on my Siemens Mobile 501, a laptop with a
PII 266, 96MB RAM, 4 GB harddrive, ESS 1869-soundchip and Neomagic
NM2160 graphics-chipset.
After some troubles (the sb.o- module of bf24, 2.4.20-686 etc. only
accept irq 7) I got the soundchip working, it plays fine with
Bernhard Kleine <[EMAIL PROTECTED]> wrote:
>i have a similar soundchip and use the sb.o module. When i ran
>sndconfig, it asked for the IRQ and i sayed 5. Now I have an error
>message on my display during boot time, but the sound works perfectly
>under X.
What error-message? Does it run on the s
Bernhard Kleine <[EMAIL PROTECTED]> wrote:
>>
>> What error-message? Does it run on the same IRQ as lp0?
>>
>sb: Interrupt test on IRQ7 failes - Probable IRQ conflict
>
>-- probably not, but I am not shure, on the laptop CUPS has not been
>tested since the sound started to work
When I set the
Vampie Mann <[EMAIL PROTECTED]> wrote:
>The Yamaha OPL-SA2 is causing system lockup after a
>few seconds of play. there are no errors in
>/proc/interupts or /proc/ioports and the card is on a
>ISA bus so i pnpdump and there is Nothing
>UN-commented, i need help geting this done. i bought
>this lap
Hi,
Xavier Maillard <[EMAIL PROTECTED]> wrote:
>> I have a Linksys WPC11 v3 wireless card. It works with the orinico_cs
>
>I have the same Wireless card here but I just could not figure out how
>to make the orinoco_cs working for me. What did you do ? I mean which
>kernel version, what 3rd party t
Vampie Mann <[EMAIL PROTECTED]> wrote:
>The Yamaha OPL-SA2 is causing system lockup after a
>few seconds of play. there are no errors in
>/proc/interupts or /proc/ioports and the card is on a
>ISA bus so i pnpdump and there is Nothing
>UN-commented, i need help geting this done. i bought
>this lap
Hi,
Xavier Maillard <[EMAIL PROTECTED]> wrote:
>> I have a Linksys WPC11 v3 wireless card. It works with the orinico_cs
>
>I have the same Wireless card here but I just could not figure out how
>to make the orinoco_cs working for me. What did you do ? I mean which
>kernel version, what 3rd party t
13 matches
Mail list logo
