y
has a 40GB dive -- so that's probably what I'll buy.
--
Bill Moseley
[EMAIL PROTECTED]
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
lient: DHCPDISCOVER on eth1 to 255.255.255.255
port 67 interval 7
Dec 22 06:29:15 localhost dhclient: DHCPOFFER from 192.168.1.1
What's trying to bring up eth0? This is a very trimmed down Sarge
install, and I'm not running anything (like if ifplugd), just the
default hotplug installat
On Fri, Dec 23, 2005 at 11:20:09AM +0100, François TOURDE wrote:
> Le 13139ième jour après Epoch,
> Bill Moseley écrivait:
> > My wireless connection now takes much longer, and it seems that might be
> > due to trying to bring up eth0 first instead of eth1. I boot with the
&g
e problem.
This site[1] commented that they couldn't get the WG511 running with
Prism54 (maybe also due to ACPI). Perhaps I should try the
ndiswrapper.
[1]http://freeunix.dyndns.org:8088/site2/howto/Wifi4.shtml
--
Bill Moseley
[EMAIL PROTECTED]
--
To UNSUBSCRIBE, email to [EMAI
I also just posted a question to the hotplug list asking for help with
why no hotplug events are generated when I remove my card. Removing
the card doesn't generate any events, so I have to reboot to get the
card working again. Any ideas what might be the problem?
--
Bill Moseley
[EM
up
incorrectly?
I'm running Prims54 on the Linux laptop, and IIRC WPA isn't working
with that driver yet.
--
Bill Moseley
[EMAIL PROTECTED]
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
And I miss the online support that's available when running Debian. I
had both Apple Care (phone support) and the people at the "Genius Bar"
at the Apple store tell me to reinstall the OS when the problem was
only a mis-configured /etc/cups/client.conf -- reminded me too much of
the old
gger). Is there a way to tell what font my xterm is
using?
My DPI setting is correct so shouldn't I be able to pick a font by
point size and have it be the correct size?
Plenty to pick from...
$ DISPLAY=:0.0 xlsfonts | wc -l
7358
--
Bill Moseley
[EMAIL PROTECTED]
--
To UNSUBSCRIBE,
On Tue, Jul 10, 2007 at 07:13:22PM -0700, Jeff D wrote:
> On Tue, 10 Jul 2007, Bill Moseley wrote:
>
> >I just got a new T60p wide screen (1680x1050) running X Window System
> >Version 7.2.0 (xorg).
> >
> I believe it's fixed, but try something like this:
>
&
s with Ubuntu, though.
--
Bill Moseley
[EMAIL PROTECTED]
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
problems with wireless now. I think my hardware must
be failing as I'm having the same problems with different drivers.
Lately when I remove my wireless card my machine will freeze hard.
Seems like these problems started with upgrading to 2.6.5, but I also
suspect my wireless hardware is
ere's either a long
delay or a system hang. I don't think that's a cardmgr issue, though --
as I've tried manually removing the drivers (ifdown eth1; rmmod
) and have the same problems. So, I'll agree that it's either a
problem with the driver dealing with being rem
27;s my question. What else does cardmgr do? I tried stopping
cardmgr then manually inserting my card, manually loading the modules
and finally manually running the script but the driver didn't bind to
the card (or something like that). So I'm curious what other step is
happening.
--
Bill
Any nice graphical tools for displaying wireless data (like signal
strength)? I use cards based on Prism (using hostap) and also and
Aironet 350.
Thanks,
--
Bill Moseley
[EMAIL PROTECTED]
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Cont
On Thu, Jul 08, 2004 at 09:01:14PM +0200, Joan Tur wrote:
> -BEGIN PGP SIGNED MESSAGE-
> Hash: SHA1
>
> Es Dijous 08 Juliol 2004 19:01, en Bill Moseley va escriure:
> | Any nice graphical tools for displaying wireless data (like signal
> | strength)? I use cards bas
se level: -90 dBm (0.00 uW)
=·x
signal-to-noise ratio: +4 dB
===·······x
--
Bill Moseley
[EMAIL PROTECTED]
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with
seems to have a bad connection inside the laptop -- I
have to wiggle the power cable just right to make the connection.
Might be time to look for a new (Debian friendly) laptop.
--
Bill Moseley
[EMAIL PROTECTED]
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
ty torx driver? The star pattern with the pin in
the center? http://www.wihatools.com/images/Bits/701endpix150.jpg
Or something else? I've got security torx bits. I keep them with my
bolt cutter...
> I hear Apple laptops are *extremely* resistant... hmm.
That's what my wife keeps b
il.org/disassembly_laptop.html
look the same?
--
Bill Moseley
[EMAIL PROTECTED]
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
s (they are round) that are embedded in the plastic
laptop case had come lose and when I tried to remove the screw and it
just would spin in place. I had to use a drill to cut off the top of
the screw to get it removed.
--
Bill Moseley
[EMAIL PROTECTED]
--
To UNSUBSCRIBE, email to [EMAIL PR
resting. Notice the enlarged photo has the
original Toshiba lable, but the photo has been modified to
erase the "TOSHIBA" at the top of the lable.
--
Bill Moseley
[EMAIL PROTECTED]
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
;m not clear what or if anything needs to be downloaded from
http://prism54.org/download/ -- seems like I may if I want to use the
prism54 1.2 or cvs versions.
Anyone installed the prism54 drivers lately?
Thanks,
--
Bill Moseley
[EMAIL PROTECTED]
--
To UNSUBSCRIBE, email to [EMAIL PROTECTE
n 1.1. If I want to
build a newer version I can download either the testing or cvs
packages from http://prism54.org/download/. I'm not entirely clear
what gets build from those tarballs - I assume just the prism54 kernel
module. And if using 1.2 or cvs would even make a difference for
apping hotplug
script echo
and then eth1 comes up automatically at boot on on card insertion (I
already had a eth1 stanza setup for wireless).
I had other problems with the kernel upgrade that I'll post in another
thread.
Thanks for the help it getting this setup.
--
Bill Mosel
ings runs the stanza
eth1). At least that's how I remember things working when I read the
ifupdown docs way, way back.
--
Bill Moseley
[EMAIL PROTECTED]
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
eth1 to 255.255.255.255 port
67
Dec 5 21:03:31 localhost dhclient: DHCPACK from 192.168.1.1
Dec 5 21:03:31 localhost dhclient: bound to 192.168.1.3 -- renewal in 600
seconds.
--
Bill Moseley
[EMAIL PROTECTED]
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
th
hotplug. Seems like it should be a conflict between the two systems.
--
Bill Moseley
[EMAIL PROTECTED]
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
r
cool tools. (I use icewm.)
Anyway, I'm new to the digital photo world so I'm curious how others
manage their photo collections on linux.
--
Bill Moseley
[EMAIL PROTECTED]
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
t a
Xircom (Lucent/Agere DSP) mini-PCI K56Flex modem.
The scanModem script says I need ltmodem-8.31a9.tar.gz.
The info online about winmodems seems to be a confusing mix of
looping web links, and it's hard to know what's outdated or is different
with 2.6 kernels.
--
Bill Moseley
ls
> have packages built against them.
Hi Nate,
Are you saying the latest supported kernel is 2.6.8 for the debian
packages or for the ltmodem code itself (meaning I would need to
downgrade my kernel)? I assume you just mean the debs.
--
Bill Moseley
[EMAIL PROTECTED]
--
To UNSUBSCRIBE, emai
work again.)
> I imagine it's pretty outdated - there aren't a lot of people who are into
> developing this sort of driver who are still using dial-up. :-(
Yep, that's why I have waited so long to try this.. ;)
--
Bill Moseley
[EMAIL PROTECTED]
--
To UNSUBSCRIBE, email to
On Mon, Dec 13, 2004 at 01:05:27PM -0400, Derek Broughton wrote:
> On Monday 13 December 2004 12:13, Bill Moseley wrote:
> > On Mon, Dec 13, 2004 at 09:27:58AM -0400, Derek Broughton wrote:
> > > Why do you want the kernel headers on the laptop? If you're building the
mention my knowledge of running an X server is limited. So I'm not
clear how to accomplish this.
Any suggestions?
--
Bill Moseley
[EMAIL PROTECTED]
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
t...all this should give you a good starting
> point:)
Thanks for the pointer. That script assumes you already know the user
and $DISPLAY to use.
I guess I can assume $DISPLAY is :0 for the connected machine. But
then the issue is what user is currently connected to :0?
--
Bill Moseley
[
to rebuild the kernel every time you do an apt-get
upgrade?
I build my own kernels, but as far as I know I think I could be using
the packaged kernel-images just fine.
--
Bill Moseley
[EMAIL PROTECTED]
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe".
ut-n-paste some iptables rules to open a
new port. But, I do need a tool that will set all those default rules
for spoofing in invalid ip blocks that are not specific to how my
machine is configured.
On my laptop I've been running ipmasq.
--
Bill Moseley
[EMAIL PROTECTED]
--
To U
nder if I could run two wireless cards in my laptop with one as an
AP.
--
Bill Moseley
[EMAIL PROTECTED]
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
from CDs?
Might try:
http://btmgr.sourceforge.net/
--
Bill Moseley
[EMAIL PROTECTED]
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
could cache the reduced images and use the thumbnails inside the
original photos. And maybe MySQL for organizing and searching for the
images. But, if someone has something they love, I'd like to hear
about it.
Thanks,
--
Bill Moseley
[EMAIL PROTECTED]
--
To UNSUBSCRIBE, emai
a few features I don't seem to have -- for example
the crop tool that allow you to lock in an aspect ratio. Do you know
if there's an additional package required?
I'm not running KDE, rather icewm. I guess I must have the required
kde libs installed.
Thanks,
--
Bill Moseley
[EMAIL
On Thu, Feb 17, 2005 at 11:12:56PM -0800, Bill Moseley wrote:
>
> I'm running Sid on my laptop and installed digikam. But the on-line
> docs describe quite a few features I don't seem to have -- for example
> the crop tool that allow you to lock in an aspect ratio. Do yo
one know what the LED not lighting might mean, and also
is there any way to monitor the charging system from the OS? toshset
doesn't see to provide anything.
Thanks,
--
Bill Moseley
[EMAIL PROTECTED]
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
and wireless network selection? I guess the wapromad
statement that it doesn't need ifplugd is what is confusing me. Does
that mean wpa_supplicant is the one solution?
--
Bill Moseley
[EMAIL PROTECTED]
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
t location. Update sources.list to point to public debian
mirrors? Or maybe create an ssh tunnel to the machine running
apt-proxy? What would you suggest?
--
Bill Moseley
[EMAIL PROTECTED]
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
even have to see people answer my questions, either. Not to
mention how annoying it is to subscribe -- enter my email address and
then have to reply to a confirmation message. And do it again when
I want to unsubscribe!?! Who has time for that?
--
Bill Moseley
[EMAIL PROTECTED]
--
To UNSUBSCR
I
do want cc's.
It's a lot easier to control my own setup than the thousands of others
that post on lists I'm on, I find.
Ok, so the cc's do generate extra mail traffic.
--
Bill Moseley
[EMAIL PROTECTED]
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
e there is something of
> urgence then I set Mail-Followup-To: too.
Good. And hope they respect it. How much time do you want to spend
trying to get the rest of the on-line world to follow your wishes?
If you don't want duplicates then filter them out.
--
Bill Moseley
[EMAIL PRO
On Sun, May 29, 2005 at 12:43:50AM -0400, Matej Cepl wrote:
> Bill Moseley wrote:
> > Frankly, I love being cc'd on mailing lists. And I never see
> > duplicates due to the common procmail trick:
> >
> > :0 Wh: msgid.lock
> > | formail -D 8192 $HOM
On Mon, May 30, 2005 at 04:34:33PM +1200, Chris Bannister wrote:
> On Sat, May 28, 2005 at 08:41:44AM -0700, Bill Moseley wrote:
> > On Sat, May 28, 2005 at 05:22:10PM +0200, Michelle Konzack wrote:
> >
> > > IF I WANT CCs, because there is something of
> > > ur
use on the laptop (which is USB 1.0, IIRC)?
Thanks,
--
Bill Moseley
[EMAIL PROTECTED]
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
st laptops? Or will 12v
typically work directly on laptops?
--
Bill Moseley
[EMAIL PROTECTED]
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
but that seemed like the most basic approach
I could come up with.
--
Bill Moseley
mailto:[EMAIL PROTECTED]
ramebuffer-HOWTO-5.html#ss5.3
--
Bill Moseley [EMAIL PROTECTED]
.
(it's at 1/2 hour now after a year of very light use!).
14"+ screen, integrated 802.11b (no more snapped off cards), long
battery, and light (of course). Any favorites out there? I'm inclined
toward IBM, but I'm also trying to stay a few hundred below $2k, if
possible.
talled font servers, too, which
I'm sure I didn't need to do. Is there a less painful path to get good
looking fonts?
Thanks very much,
--
Bill Moseley
mailto:[EMAIL PROTECTED]
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
4 file.
When it was first installing xserver it asked if I wanted to maintain the
config file, and I said yes (as I typically hand edit that file). But my
guess is not it's not creating that file because of that. I just would
like to start over on X11 setup.
I think these things go more smoothly
ended way to move between static and DHCP?
Am I feeling Clueless? Yes.
Thanks very much,
--
Bill Moseley
mailto:[EMAIL PROTECTED]
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
I swap interfaces on the laptop that
my other linux machines can reconnect to the laptop but my windows machine
can't.
Thanks,
--
Bill Moseley
mailto:[EMAIL PROTECTED]
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
At 04:15 AM 06/27/02 -0700, Alexander Yukhimets wrote:
>On Wed, Jun 26, 2002 at 11:25:06PM -0700, Bill Moseley wrote:
>> But the *big* problem now is speed.
>> laptop:/var/log# iwconfig
>> eth1 IEEE 802.11-DS ESSID:"WLAN" Nickname:"Prism I"
>
When installing on a laptop I get the message:
It seems your system doesn't need PCMCIA. It was installed with the
rest of the kernel, but can be removed now.
I assume I need PCMCIA, so why is it asking (or why does it think I don't
need PCMCIA)?
Thanks,
--
Bill Moseley
mai
how to automatically bring down or up eth0 on card
change.
BTW -- I've got an Aironet 532. Should I be setting options in wireless.opts?
Thanks,
--
Bill Moseley
mailto:[EMAIL PROTECTED]
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
original kernel from being replaced when I
install the kernel the second time...
Thanks,
--
Bill Moseley
mailto:[EMAIL PROTECTED]
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
make[3]: *** [all] Error 2
make[3]: Leaving directory `/usr/src/modules/pcmcia-cs'
make[2]: *** [build-modules] Error 2
make[2]: Leaving directory `/usr/src/modules/pcmcia-cs'
make[1]: *** [kdist_image] Error 2
make[1]: Leaving directory `/usr/src/modules/pcmcia-cs'
Module /usr/src/
t decide what string to match when adding kernel
modules? Is this an issue when building my own kernel, even if from a
kernel-source package?)
--
Bill Moseley
mailto:[EMAIL PROTECTED]
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
running fluxbox). Actually,
aumix is not that bad, really.
--
Bill Moseley
mailto:[EMAIL PROTECTED]
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
ult.asp?EDC=271073
Or is that throwing money at a brand name? I see those cisco units on Ebay
for a small savings, but nothing too significant.
Any suggestions on how to debug the dropped connections?
Any recommendations on Access Points?
Thanks,
--
Bill Moseley
mailto:[EMAIL PROTECTED]
--
T
ot;ZAxisMapping" "4 2"
without much luck.
Thanks again,
--
Bill Moseley
mailto:[EMAIL PROTECTED]
page-down. I guess I can live with
pushing two buttons for paste.
It's taking a while to get used to X's copy-n-paste setup. I keep trying
to replace something by highlighting it and then pasting.
Thanks again!
--
Bill Moseley
mailto:[EMAIL PROTECTED]
or not. I don't see any other obvious errors in ogle's output.
Any ideas?
Thanks,
--
Bill Moseley
mailto:[EMAIL PROTECTED]
IG_APM_DISPLAY_BLANK is not set
# CONFIG_APM_RTC_IS_GMT is not set
# CONFIG_APM_ALLOW_INTS is not set
# CONFIG_APM_REAL_MODE_POWER_OFF is not set
--
Bill Moseley
mailto:[EMAIL PROTECTED]
t that address is -- and so
can the email harvesting programs.
So far, the best solution:
apt-get install spamassassin
I do wish the debian lists required subscription before posting, and that
vacation programs were a little smarter...
--
Bill Moseley
mailto:[EMAIL PROTECTED]
en realized it
wasn't really that hard to just shut down. ;)
--
Bill Moseley
mailto:[EMAIL PROTECTED]
c 9544 0 [ymfpci]
soundcore 3492 2 [ymfpci]
eepro100 17080 1
keybdev 1664 0 (unused)
usbkbd 2872 0 (unused)
usb-uhci 20972 0 (unused)
usbcore48544 0 [usbkbd usb-uhci]
--
Bill Moseley
mailto:[EMAIL PROTECTED]
t not all seem to work just fine.
So my question is why (or when) would I need to install ALSA? Is there an
advantage of using it in my case when sound seems to be working fine?
Thanks,
--
Bill Moseley
mailto:[EMAIL PROTECTED]
hat was a while back. Do you have installation notes?
--
Bill Moseley
mailto:[EMAIL PROTECTED]
w where to install the modules? Or in other words, if I install alsa-utils how does it (dpkg) determine were to install modules, and which alsa-modules pacakge to install?
Thanks very much,
--
Bill Moseley
mailto:[EMAIL PROTECTED]
.tar.gz
Thanks, that was easy!
Sure glad there's a FAQ in the distribution. I would not have guessed that
this message means my SSID didn't match the access point.
p80211knetdev_hard_start_xmit: Tx attempt prior to association, frame dropped.
Thanks for the help, Roger.
--
Bill Moseley
mailto:[EMAIL PROTECTED]
ng my
hair out over setting up the modules. I was finding it hard to get info to
help me grok all of the modules setup. Sure is easier to run modconf and
simply select the module(s) needed.
Thanks for you comments!
--
Bill Moseley
mailto:[EMAIL PROTECTED]
I see the 200mw Senao SL-2511 access point for around $200usd. Anyone know
anything about these?
Thanks,
--
Bill Moseley
mailto:[EMAIL PROTECTED]
re
monitor setup? I'm running icewm.
BTW -- I see this when running wmtuxtime:
Gdk-WARNING **: Creating pixmap from xpm with NULL window and colormap
what's that about?
Thanks much,
--
Bill Moseley [EMAIL PROTECTED]
hiba
> > Gdk-WARNING **: Creating pixmap from xpm with NULL window and colormap
>
> What version of toshutils are you using?
ii toshutils 2.0.1-2 Toshiba laptop utilities
I just ran wmtuxtime. Clicked on the wrench and locked up my laptop --
first hard crash I've had in weeks!
--
Bill Moseley [EMAIL PROTECTED]
at.
(it's at 1/2 hour now after a year of very light use!).
14"+ screen, integrated 802.11b (no more snapped off cards), long
battery, and light (of course). Any favorites out there? I'm inclined
toward IBM, but I'm also trying to stay a few hundred below $2k, if
possible.
talled font servers, too, which
I'm sure I didn't need to do. Is there a less painful path to get good
looking fonts?
Thanks very much,
--
Bill Moseley
mailto:[EMAIL PROTECTED]
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
4 file.
When it was first installing xserver it asked if I wanted to maintain the
config file, and I said yes (as I typically hand edit that file). But my
guess is not it's not creating that file because of that. I just would
like to start over on X11 setup.
I think these things go more smoothly
ended way to move between static and DHCP?
Am I feeling Clueless? Yes.
Thanks very much,
--
Bill Moseley
mailto:[EMAIL PROTECTED]
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
I swap interfaces on the laptop that
my other linux machines can reconnect to the laptop but my windows machine
can't.
Thanks,
--
Bill Moseley
mailto:[EMAIL PROTECTED]
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
At 04:15 AM 06/27/02 -0700, Alexander Yukhimets wrote:
>On Wed, Jun 26, 2002 at 11:25:06PM -0700, Bill Moseley wrote:
>> But the *big* problem now is speed.
>> laptop:/var/log# iwconfig
>> eth1 IEEE 802.11-DS ESSID:"WLAN" Nickname:"Prism I"
>
nd how to automatically bring down or up eth0 on card
change.
BTW -- I've got an Aironet 532. Should I be setting options in wireless.opts?
Thanks,
--
Bill Moseley
mailto:[EMAIL PROTECTED]
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
but that seemed like the most basic approach
I could come up with.
--
Bill Moseley
mailto:[EMAIL PROTECTED]
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
ramebuffer-HOWTO-5.html#ss5.3
--
Bill Moseley [EMAIL PROTECTED]
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
ays been an issue with my current SMC card.
--
Bill Moseley
[EMAIL PROTECTED]
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
in
> testing will do, and it's backwards compatible (or rather includes the
> binaries for) 2.4.
Do you mean the module-init-tools package? The kernel-image modules
depend on that package.
--
Bill Moseley
[EMAIL PROTECTED]
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a sub
d how OSS works, either!
> As for wireless, my Wireless cardbus card works fine with 2.6.
So the question I have is do I still need to install separate wlan-ng
drivers? Or are the prism drivers built into the 2.6 kernel?
--
Bill Moseley
[EMAIL PROTECTED]
--
To UNSUBSCRIBE, email to [EMAIL P
make upgrading easier. Oh, ya, so far this
hasn't been exactly easy...
[1] I also have an aironet 352 card, but using it makes my SMC access
point freeze after some time and I have to power cycle the AP.
--
Bill Moseley
[EMAIL PROTECTED]
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a
y:
1) pcmcia in the kernel source
2) pcmcia-cs from sf.net
3) madwifi also from sf.net.
Too many choices for a simple upgrade!
--
Bill Moseley
[EMAIL PROTECTED]
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
;d like to move to ACPI, but for no other reason than it seems like the
the newer option.
--
Bill Moseley
[EMAIL PROTECTED]
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
(You can ensure a command never fails by
suffixing "|| true".)
Which, I think it would be handy if a command fails then the interface
is not brought up. That would make it easy to have a command that tests
if the interface is actually connected.
--
Bill Moseley
[EMAIL PR
y features. The Aironet
card makes my SMC AP lock up.
--
Bill Moseley
[EMAIL PROTECTED]
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
...
along with
:0 Wh: msgid.lock
| formail -D 8192 $HOME/msgid.cache
they you you may find those CC's not so annoying, and maybe even nice on
very slow responding lists.
--
Bill Moseley
[EMAIL PROTECTED]
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsub
't have to mess with much.
Any reason to throw in a PCI wireless card into one of my Debian boxes
and make that an AP -- other than for the "fun" of building an AP?
--
Bill Moseley
[EMAIL PROTECTED]
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
1 - 100 of 125 matches
Mail list logo
