Hi,
I have been running Debian on my Compaq Presario 1200 since i bought it in
february this year. It was a bit fidely to get the Conexant LANFinity nic
working, but in the end i suceeded.
I have one unresolved problem though. I am running kernel 2.2.23 at the moment,
but i havn't been able to
On Monday 23 December 2002 09:35, Anders Nielsen wrote:
> I have one unresolved problem though. I am running kernel 2.2.23 at the
> moment, but i havn't been able to get kernel 2.4 to work. The machine boots
> at runs perfectly, but when i reboot it hangs realy badly. It takes a
> couple of hard r
Eric D Nielsen wrote:
>
> I recently bought a vprMatrix laptop and am trying to setup a dual boot
> winXP/Debian configuration.
>
> I'm used to using fips to repartition windows drives non-destructively,
> however
> it can't handle the NTFS partition. So I tried PowerQuests's Partition Magic
>
You have to remove all Apic (not apci) from your kernel
(CONFIG_X86_UP_APIC=n and so on), that will probably solve your
problem...
man, 2002-12-23 kl. 06:22 skrev Arash Bijanzadeh:
> Hi all,
> I have installed woody on a unspiron 8100, everything's fine but apm. Every
> time I plug in/out the po
> > I have one unresolved problem though. I am running kernel 2.2.23 at the
> > moment, but i havn't been able to get kernel 2.4 to work. The machine
> boots
> > at runs perfectly, but when i reboot it hangs realy badly. It takes a
> > couple of hard reboots (holding the power button down for 5 sec
Has anyone tried the stock X driver for Nvidia'a cards, the nv driver,
as opposed to using the debs of the official driver?
I want to use a current cvs version of X, and am having trouble with
both the deb official drivers, and also the cvs "nv" driver.
cheers,
Calum.
I'm trying to get XFree86 4.2.0 to work on my Compaq Armada 7770 DMT, I can
only get a very low resolution screen to work - anyone had any real success.
The same machine worked quite well with XFree 3.
Thanks,
Chris Tipney
p.s. using woody
Eric D Nielsen, 2002-Dec-22 20:17 -0500:
> I recently bought a vprMatrix laptop and am trying to setup a dual boot
> winXP/Debian configuration.
>
> I'm used to using fips to repartition windows drives non-destructively,
> however
> it can't handle the NTFS partition. So I tried PowerQuests's Pa
I've got a laptop with both a wired interface (3c59x) and a wireless
interface (orinoco mini-pci card with a pcmcia bridge on it) built-in.
I'd like some easy way to select which card to use on bootup.. right now,
I've got the system set up not to automatically initialize either cards (I
don't hav
On Monday 23 December 2002 13:25, Anders Nielsen wrote:
> What is APIC support? What am i missing by having it disabled in the
> kernel?
It is a driver for some irq hardware in the cpu. It is essential to SMP
systems but as far as I know not much good anywhere else. And severel laptops
wont eve
What kind of nvidia graphics card are you talking about?
AFAIK, the 'mobile' versions (GeForce 2 Go e.g.) are not supported by XFree's
nv driver ...
Compiling the sources from nvidia's homepage has - up to now - never been a
problem for me; but with kernel 2.4.20 i get loads of unresolved symbols
On Sat, Dec 21, 2002 at 05:19:00PM +, Hugh Saunders wrote:
> hello all!
> have v nice T23 which was running linux just fine... [apart from irda]
> untill I recompiled my kernel from the 2.4.18 source. Now i get major
> video corruption on resume from suspend which can only be solved by
> reboot
On Mon, Dec 23, 2002 at 10:34:48AM -0800, Glen Mehn wrote:
> On Sat, Dec 21, 2002 at 05:19:00PM +, Hugh Saunders wrote:
> > hello all!
> > have v nice T23 which was running linux just fine... [apart from irda]
> > untill I recompiled my kernel from the 2.4.18 source. Now i get major
> > video c
Hi!
I've got a wonderful laptop (dell inspiron) which
works very well with woody. My graphic card is an Ati Radeon 7500 but i don't
know how could i have the acceleration for it.
Yours ideas are welcome.
Cheers
sam
Steffen Elste wrote:
What kind of nvidia graphics card are you talking about?
It's a GeForce 2 Ti.
AFAIK, the 'mobile' versions (GeForce 2 Go e.g.) are not supported by XFree's
nv driver ...
It's supported OK, but whenever I try to run a GL prog, like glxgears,
it gets a SEGV.
This happe
Nate Carlson <[EMAIL PROTECTED]> writes:
> I just start up whichever interface I want by hand. I'm wondering
> if there's an easier way.. how are other people dealing with this
> problem?
It is a problem. I'm doing it by hand (ifup, ifdown) at the moment,
and I'm not sure what a better way wou
There are a few things that change depending on which network
I'm on. /etc/hosts, my unison config (because it seems to ignore
/etc/hosts and go straight to DNS), and some extra things I use in
/etc/pcmcia/wireless.opts, the most crucial of which is the WEP key.
To switch configurations, I manual
On Tuesday 24 December 2002 00:49, Samuel Desseaux wrote:
> Hi!
>
> I've got a wonderful laptop (dell inspiron) which works very well with
> woody. My graphic card is an Ati Radeon 7500 but i don't know how could i
> have the acceleration for it. Yours ideas are welcome.
Well, same problem here. I
On Mon, 2002-12-23 at 16:28, Aryan Ameri wrote:
> On Tuesday 24 December 2002 00:49, Samuel Desseaux wrote:
> > Hi!
> >
> > I've got a wonderful laptop (dell inspiron) which works very well with
> > woody. My graphic card is an Ati Radeon 7500 but i don't know how could i
> > have the acceleration
On Mon, 2002-12-23 at 16:28, Aryan Ameri wrote:
> On Tuesday 24 December 2002 00:49, Samuel Desseaux wrote:
> > Hi!
> >
> > I've got a wonderful laptop (dell inspiron) which works very well with
> > woody. My graphic card is an Ati Radeon 7500 but i don't know how could i
> > have the acceleration
On Mon, 2002-12-23 at 16:28, Aryan Ameri wrote:
> On Tuesday 24 December 2002 00:49, Samuel Desseaux wrote:
> > Hi!
> >
> > I've got a wonderful laptop (dell inspiron) which works very well with
> > woody. My graphic card is an Ati Radeon 7500 but i don't know how could i
> > have the acceleration
Shit, I'm terribly sorry about sending that message three times.
Evolution kept telling me it wasn't getting through, and as soon as I
changed mail servers it silently sent all three previous
attempts through...
--
Joe Wreschnig <[EMAIL PROTECTED]>
signature.asc
Description: This is a digitally
Jeff ([EMAIL PROTECTED]) had this to say on 12/23/02 at 10:46:
> I recommend converting the NTFS to FAT32. I believe you can do this
> with built-in tools on WinXP. This will give you a much better
No, it only converts the other way - FAT32 to NTFS.
--
PGP Fingerprint: 0AA8 DC47 CB63 AE3F C7
Hi,
I have been running Debian on my Compaq Presario 1200 since i bought it in
february this year. It was a bit fidely to get the Conexant LANFinity nic
working, but in the end i suceeded.
I have one unresolved problem though. I am running kernel 2.2.23 at the moment,
but i havn't been able to
On Monday 23 December 2002 09:35, Anders Nielsen wrote:
> I have one unresolved problem though. I am running kernel 2.2.23 at the
> moment, but i havn't been able to get kernel 2.4 to work. The machine boots
> at runs perfectly, but when i reboot it hangs realy badly. It takes a
> couple of hard r
Eric D Nielsen wrote:
>
> I recently bought a vprMatrix laptop and am trying to setup a dual boot
> winXP/Debian configuration.
>
> I'm used to using fips to repartition windows drives non-destructively, however
> it can't handle the NTFS partition. So I tried PowerQuests's Partition Magic
> to
You have to remove all Apic (not apci) from your kernel
(CONFIG_X86_UP_APIC=n and so on), that will probably solve your
problem...
man, 2002-12-23 kl. 06:22 skrev Arash Bijanzadeh:
> Hi all,
> I have installed woody on a unspiron 8100, everything's fine but apm. Every
> time I plug in/out the po
> > I have one unresolved problem though. I am running kernel 2.2.23 at the
> > moment, but i havn't been able to get kernel 2.4 to work. The machine
> boots
> > at runs perfectly, but when i reboot it hangs realy badly. It takes a
> > couple of hard reboots (holding the power button down for 5 sec
Has anyone tried the stock X driver for Nvidia'a cards, the nv driver,
as opposed to using the debs of the official driver?
I want to use a current cvs version of X, and am having trouble with
both the deb official drivers, and also the cvs "nv" driver.
cheers,
Calum.
--
To UNSUBSCRIBE, emai
I'm trying to get XFree86 4.2.0 to work on my Compaq Armada 7770 DMT, I can
only get a very low resolution screen to work - anyone had any real success.
The same machine worked quite well with XFree 3.
Thanks,
Chris Tipney
p.s. using woody
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a
Eric D Nielsen, 2002-Dec-22 20:17 -0500:
> I recently bought a vprMatrix laptop and am trying to setup a dual boot
> winXP/Debian configuration.
>
> I'm used to using fips to repartition windows drives non-destructively, however
> it can't handle the NTFS partition. So I tried PowerQuests's Parti
I've got a laptop with both a wired interface (3c59x) and a wireless
interface (orinoco mini-pci card with a pcmcia bridge on it) built-in.
I'd like some easy way to select which card to use on bootup.. right now,
I've got the system set up not to automatically initialize either cards (I
don't hav
On Monday 23 December 2002 13:25, Anders Nielsen wrote:
> What is APIC support? What am i missing by having it disabled in the
> kernel?
It is a driver for some irq hardware in the cpu. It is essential to SMP
systems but as far as I know not much good anywhere else. And severel laptops
wont eve
What kind of nvidia graphics card are you talking about?
AFAIK, the 'mobile' versions (GeForce 2 Go e.g.) are not supported by XFree's
nv driver ...
Compiling the sources from nvidia's homepage has - up to now - never been a
problem for me; but with kernel 2.4.20 i get loads of unresolved symbols
On Sat, Dec 21, 2002 at 05:19:00PM +, Hugh Saunders wrote:
> hello all!
> have v nice T23 which was running linux just fine... [apart from irda]
> untill I recompiled my kernel from the 2.4.18 source. Now i get major
> video corruption on resume from suspend which can only be solved by
> reboot
On Mon, Dec 23, 2002 at 10:34:48AM -0800, Glen Mehn wrote:
> On Sat, Dec 21, 2002 at 05:19:00PM +, Hugh Saunders wrote:
> > hello all!
> > have v nice T23 which was running linux just fine... [apart from irda]
> > untill I recompiled my kernel from the 2.4.18 source. Now i get major
> > video c
Steffen Elste wrote:
What kind of nvidia graphics card are you talking about?
It's a GeForce 2 Ti.
AFAIK, the 'mobile' versions (GeForce 2 Go e.g.) are not supported by XFree's
nv driver ...
It's supported OK, but whenever I try to run a GL prog, like glxgears,
it gets a SEGV.
This happens
Nate Carlson <[EMAIL PROTECTED]> writes:
> I just start up whichever interface I want by hand. I'm wondering
> if there's an easier way.. how are other people dealing with this
> problem?
It is a problem. I'm doing it by hand (ifup, ifdown) at the moment,
and I'm not sure what a better way wou
There are a few things that change depending on which network
I'm on. /etc/hosts, my unison config (because it seems to ignore
/etc/hosts and go straight to DNS), and some extra things I use in
/etc/pcmcia/wireless.opts, the most crucial of which is the WEP key.
To switch configurations, I manual
Hi!
I've got a wonderful laptop (dell inspiron) which
works very well with woody. My graphic card is an Ati Radeon 7500 but i don't
know how could i have the acceleration for it.
Yours ideas are welcome.
Cheers
sam
On Tuesday 24 December 2002 00:49, Samuel Desseaux wrote:
> Hi!
>
> I've got a wonderful laptop (dell inspiron) which works very well with
> woody. My graphic card is an Ati Radeon 7500 but i don't know how could i
> have the acceleration for it. Yours ideas are welcome.
Well, same problem here. I
On Mon, 2002-12-23 at 16:28, Aryan Ameri wrote:
> On Tuesday 24 December 2002 00:49, Samuel Desseaux wrote:
> > Hi!
> >
> > I've got a wonderful laptop (dell inspiron) which works very well with
> > woody. My graphic card is an Ati Radeon 7500 but i don't know how could i
> > have the acceleration
On Mon, 2002-12-23 at 16:28, Aryan Ameri wrote:
> On Tuesday 24 December 2002 00:49, Samuel Desseaux wrote:
> > Hi!
> >
> > I've got a wonderful laptop (dell inspiron) which works very well with
> > woody. My graphic card is an Ati Radeon 7500 but i don't know how could i
> > have the acceleration
On Mon, 2002-12-23 at 16:28, Aryan Ameri wrote:
> On Tuesday 24 December 2002 00:49, Samuel Desseaux wrote:
> > Hi!
> >
> > I've got a wonderful laptop (dell inspiron) which works very well with
> > woody. My graphic card is an Ati Radeon 7500 but i don't know how could i
> > have the acceleration
Shit, I'm terribly sorry about sending that message three times.
Evolution kept telling me it wasn't getting through, and as soon as I
changed mail servers it silently sent all three previous
attempts through...
--
Joe Wreschnig <[EMAIL PROTECTED]>
signature.asc
Description: This is a digitally
Jeff ([EMAIL PROTECTED]) had this to say on 12/23/02 at 10:46:
> I recommend converting the NTFS to FAT32. I believe you can do this
> with built-in tools on WinXP. This will give you a much better
No, it only converts the other way - FAT32 to NTFS.
--
PGP Fingerprint: 0AA8 DC47 CB63 AE3F C7
Mike Leone, 2002-Dec-23 21:55 -0500:
> Jeff ([EMAIL PROTECTED]) had this to say on 12/23/02 at 10:46:
>
> > I recommend converting the NTFS to FAT32. I believe you can do this
> > with built-in tools on WinXP. This will give you a much better
>
> No, it only converts the other way - FAT32 to N
47 matches
Mail list logo
