> What does it do?
>
> Marc
it sets the Card in the promisc mode, that means that ALL packets comin
in will be received by this card...
(man ifconfig)
--
MfG /*/ kind regards /*/ Debian GNU\Linux
Michael Ablassmeier /*/ ITSZ Holzkirchen
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with
> What does it do?
>
> Marc
it sets the Card in the promisc mode, that means that ALL packets comin
in will be received by this card...
(man ifconfig)
--
MfG /*/ kind regards /*/ Debian GNU\Linux
Michael Ablassmeier /*/ ITSZ Holzkirchen
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
wit
ok no it works,..
if had to do:
ifconfig -i eth0 promisc
.. :)
--
MfG /*/ kind regards /*/ Debian GNU\Linux
Michael Ablassmeier /*/ ITSZ Holzkirchen
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
ok no it works,..
if had to do:
ifconfig -i eth0 promisc
.. :)
--
MfG /*/ kind regards /*/ Debian GNU\Linux
Michael Ablassmeier /*/ ITSZ Holzkirchen
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
On Sun, May 26, 2002 at 08:46:30PM +0100, Boris Duerner wrote:
> I 'm running out of ideas now,
im too :D
> other than specifying as much as you can in
> network.opts. IP address, network, broadcast, netmask. Maybe it helps.
will try that..
> You can also try to upgrade to a newer driver. Ch
On Sun, May 26, 2002 at 08:18:47PM +0100, Boris Duerner wrote:
> There is one small chance that your laptops ethernet adapter is running in
> 100Mbit-only mode. YOu can check/change that with the driver disk you got
> with the card. It is usually a small dos utility. Are the other pc's win pc's
>
> Check tha cables. Do you use BNC or RJ-45?
>
> Marc
i checked the cables (RJ-45) a view times .. (tried with some others too)
the hub shows me that 2 clients are connected, both with 10 Mbit (pcmcia
Card shows also that connect and the leds are blinkin)
if i try to ping my laptop it dont wo
On Sun, May 26, 2002 at 07:33:51PM +0100, Boris Duerner wrote:
> On Friday 01 January 1999 01:34, you wrote:
> > > Can you tell me exactly how you configured your card in the end?
> >
> > 1. ok, i setup Debian Netinstall (potato)
> > 2. ifconfig shows no eth0 device
> > 3. did pcnetconfig
> Which f
>
> Can you tell me exactly how you configured your card in the end?
>
1. ok, i setup Debian Netinstall (potato)
2. ifconfig shows no eth0 device
3. did pcnetconfig
4. added the card section in /etc/pcmcia/config
4. restartet the pcmcia services, and now a eth0 device is shown
with the option
On Sun, May 26, 2002 at 08:46:30PM +0100, Boris Duerner wrote:
> I 'm running out of ideas now,
im too :D
> other than specifying as much as you can in
> network.opts. IP address, network, broadcast, netmask. Maybe it helps.
will try that..
> You can also try to upgrade to a newer driver. C
On Sun, May 26, 2002 at 08:18:47PM +0100, Boris Duerner wrote:
> There is one small chance that your laptops ethernet adapter is running in
> 100Mbit-only mode. YOu can check/change that with the driver disk you got
> with the card. It is usually a small dos utility. Are the other pc's win pc's
On Fri, Jan 01, 1999 at 03:17:51AM +0100, Ablassmeier, Michael wrote:
> On Sun, May 26, 2002 at 05:38:20PM +0100, Boris Duerner wrote:
> >
> >
> > card "TRENDnet TE100-PCBUSR"
> > pci 0x13d1, 0xab02
> > bind "tulip_cb"
> >
>
> jea that it was, such entry wasnt in my config file
> i addet it
On Sun, May 26, 2002 at 05:38:20PM +0100, Boris Duerner wrote:
>
>
> card "TRENDnet TE100-PCBUSR"
> pci 0x13d1, 0xab02
> bind "tulip_cb"
>
jea that it was, such entry wasnt in my config file
i addet it and now it works, and the eth0 device gets loaded
thank you, thank you
nice Sunday
a ha
>
> Check tha cables. Do you use BNC or RJ-45?
>
> Marc
i checked the cables (RJ-45) a view times .. (tried with some others too)
the hub shows me that 2 clients are connected, both with 10 Mbit (pcmcia
Card shows also that connect and the leds are blinkin)
if i try to ping my laptop it dont w
On Sun, May 26, 2002 at 07:33:51PM +0100, Boris Duerner wrote:
> On Friday 01 January 1999 01:34, you wrote:
> > > Can you tell me exactly how you configured your card in the end?
> >
> > 1. ok, i setup Debian Netinstall (potato)
> > 2. ifconfig shows no eth0 device
> > 3. did pcnetconfig
> Which
Fist thank you for that mail .. so let me explain how my status now is:
then i loadet the right pcmcia modules ..loadet are:
pcnet_cs (unused) <- !
8390 [pcnet_cs]
ds[pcnet_cs]
i82365
pcmcia_core [pcnet_cs ds i82365]
so, then i did pcnetconfig and set up the ip/netma
>
> Can you tell me exactly how you configured your card in the end?
>
1. ok, i setup Debian Netinstall (potato)
2. ifconfig shows no eth0 device
3. did pcnetconfig
4. added the card section in /etc/pcmcia/config
4. restartet the pcmcia services, and now a eth0 device is shown
with the optio
ok, i tried to configure my TRENDnet TE100-PCBUSR Card with my Samsung
GT8000 ..
I installed the net install with the pcmcia packages, the right modules
for the pcmcia bus are loaded and the leds are blinkin ;)
so i tried to set up the card with pcnetconfig.
zmore /usr/share/doc/pcmcia-cs/SUPPORTE
On Fri, Jan 01, 1999 at 03:17:51AM +0100, Ablassmeier, Michael wrote:
> On Sun, May 26, 2002 at 05:38:20PM +0100, Boris Duerner wrote:
> >
> >
> > card "TRENDnet TE100-PCBUSR"
> > pci 0x13d1, 0xab02
> > bind "tulip_cb"
> >
>
> jea that it was, such entry wasnt in my config file
> i addet i
On Sun, May 26, 2002 at 05:38:20PM +0100, Boris Duerner wrote:
>
>
> card "TRENDnet TE100-PCBUSR"
> pci 0x13d1, 0xab02
> bind "tulip_cb"
>
jea that it was, such entry wasnt in my config file
i addet it and now it works, and the eth0 device gets loaded
thank you, thank you
nice Sunday
a h
Fist thank you for that mail .. so let me explain how my status now is:
then i loadet the right pcmcia modules ..loadet are:
pcnet_cs (unused) <- !
8390 [pcnet_cs]
ds[pcnet_cs]
i82365
pcmcia_core [pcnet_cs ds i82365]
so, then i did pcnetconfig and set up the ip/netm
ok, i tried to configure my TRENDnet TE100-PCBUSR Card with my Samsung
GT8000 ..
I installed the net install with the pcmcia packages, the right modules
for the pcmcia bus are loaded and the leds are blinkin ;)
so i tried to set up the card with pcnetconfig.
zmore /usr/share/doc/pcmcia-cs/SUPPORT
22 matches
Mail list logo
