RE: megahertz ccxjem3288 multi-function supported?

Megahertz/USR only made 2 different EM3288 cards. There was the XJEM3288 and the CCEM3288. Both cards are fully supported in Debian (Modem & Ethernet). Jared Valentine [EMAIL PROTECTED] -Original Message- and lower down there was a reference for EM3288, which looks very similar, if anyo

megahertz ccxjem3288 multi-function supported?

Hi there. I just recently acquired an old Toshiba Satellite 100CS with win95 in very bad condition. I really need to clean out the OS, and I was thinking of putting debian on it because the netinstall would be perfect if this megahertz pc card is supported. I've crawled over the web and the

WLAN: Throughput on a Netgear MA401

Hi, I've set up a Netgear MR814v2 and a Netgear MA401 wireless network. Works good, range is ok. Laptop is Dell 81K, card firmware is 1.3.6, always connects with 11Mbps rate and signal strength > 50. Kernel is vanilla 2.4.20 with preempt patch applied, pcmcia-cs 3.2.4. Now for the fun part: I

fstab entry in motd

Hi. I had this console problem where I couldn't see anything and so I rebooted my system. When it came back up, there was a line from /etc/fstab in my /etc/motd file. Why might this happen? I'm just curious. - Sky.

Re: console vga mode problem

On Tue, 6 May 2003 08:41:20 -0700 Sky McKinley <[EMAIL PROTECTED]> wrote: > Hi. I've got "vga=0x0f05" in my lilo.conf file so that I can get a > better console resolution, but whenever I exit X, the resolution is back > to whatever the default is and I can't see the bottom of the console > (it's

console vga mode problem

Hi. I've got "vga=0x0f05" in my lilo.conf file so that I can get a better console resolution, but whenever I exit X, the resolution is back to whatever the default is and I can't see the bottom of the console (it's down past the bottom of my screen). Has anyone seen this problem? Does anyone know

Re: Sound on a ThinkPad 560X - SOLVED

Paul, That was the crucial information. I'm not sure which was the problem, but my /etc/modules had 'char-major-14 soundcore' and I had no mixer installed. Normally I just use the tools KDE supplies but I don't have X installed on this machine so I'm really roughing it. So I fixed '/etc/modu

Re: S-video

Hi: I don't know exactly what happens, but this if what I think: - the laptop has an S-video output, so you need a s-video plug on the pc end of the cable; - then the TV has either a scart or an RCA (or both) inputs; - so, since the scart input has no signal to receive the s-video signs (maybe one

Re: PSION 56k + 10/100 PCMCIA-card (cardbus)

Hi Derek, Derek Broughton <[EMAIL PROTECTED]> writes: > From: "Jan Braun" <[EMAIL PROTECTED]> > > > I got a Psion Gold Card Netglobal 56K+10/100Mb cardbus card and try to > > run it an an ACER Travelmate 212 TX. > > > > The kernel is capcable of pcmcia-cards. It is even capable of this > > card

Re: How many of you?

I'll try to explain what a did to get sound working on my presario. OSS, It works with kernel 2.4.20 and later # # Sound # CONFIG_SOUND=y CONFIG_SOUND_VIA82CXXX=y CONFIG_MIDI_VIA82CXXX=y CONFIG_SOUND_OSS=y There is a patch from Santiago Nullo for kernel 2.4.18 I send it attached. ALSA. I use a

Re: S-video

Hi there. Sorry for the delay, but I've been rather busy lately. On Wed, 30 Apr 2003, Pedro Neves wrote: > Hi: > > Seems like your TV's scart imput has no s-video entrance. I had the same > problem with my TV. Right. That I think is actually true, after I carefully read the useless TV user's man

Re: S-video

On Wed, 30 Apr 2003, Alex Malinovich wrote: > Are you sure you're running at a resolution that your TV supports? I can > only use TV-out on my laptop if I have X running at 800x600 or lower. I > run at 1400x1050 by default which does nothing when I try to activate > the TV display. > Thanks. I'v

Inspiron 2600 - i830 driver

hello, just in case it helps anybody: I installed sarge on a Dell Inspiron 2600 with the intel 830 chipset. kernel 2.4.20. Xfree 4.2.1 from sarge did not work with the i810 driver which is supposed to do it. It worked with a new knoppix which uses X 4.3. So I upgraded to 4.3 with a deb-line from a

Re: How many of you?

I have installed woody on a Compaq Armada 1750. Very smooth, everything supported but the sound, parallel to win98, which was present on the machine when bought secondhand. the bios/setup/F10 partition is only avalaible via windows. I bought a Intel Etherexpress100pro PCMCIA card which is nicel

Re: OpenGL hardware accelerated 3d rendering

On Tuesday 29 April 2003 10:26, Mattia Dongili wrote: > Have you tried all possible (expecially low) resolutions? > On my vaio (Radeon Mobility M6 LY 16MB) dri works at [EMAIL PROTECTED] and > not on higher res. > Mine is Rage Mobility M1 8MB and tried at my default resolution: [EMAIL PROTECTED]