Additional data: 100% of the time, the system freezes on shutdown with
either "-h" or "-r" when given from an xterm. If I'm at a VT, it works
normally.
I'm going to try to compile my own kernel to debug this. Any hints about
what to try?
--
Carl Fink [EMAIL PROT
Hello,
On Thu, Oct 19, 2006 at 07:22:23AM -0400, Carl Fink wrote:
> Is there, perhaps, a debugging kernel I could test that logs everything? If
> there isn't a prebuilt one, I might just compile one this weekend.
you should give an amd64 kernel a try. Install it with
dpkg --force-architecture.
Cesare asked me to test my RAM.
I ran memtest86+ overnight. 10 passes, no errors.
I don't think there was ever a RAM problem, I was just thrashing around,
trying to come up with something.
One more data point: yesterday I acidentally booted into 2.6.16 and it
succeeded. I got to xorg and was
Carl Fink wrote:
Removing the second SODIMM from the laptop had no effect, but
removing the first (and swapping the second into slot #1) seems to have
stopped the freezes, at least on ten minutes of work. So maybe a
combination of kernel and hardware problems?
Since you suspect ram problems, i
On Mon, Oct 16, 2006 at 12:08:03PM +0200, Frans Pop wrote:
> Can you check if this is still an issue with the 2.6.18 kernel from
> unstable?
> You should be able to upgrade the kernel using the rescue mode of the
> installer (boot the installer with "rescue").
I installed 2.6.18-1-k7. The firs
reassign 393329 linux-2.6
thanks
On Monday 16 October 2006 06:23, Carl Fink wrote:
> I installed Etch on my HP Pavilion DV6119US, which uses a Turion X2
> TL-50 dual-core processor. After the install completed, I tried to
> boot off the Linux partition, but received this message:
>
> Checking TSC
Processing commands for [EMAIL PROTECTED]:
> reassign 393329 linux-2.6
Bug#393329: After seemingly successful install on Turion X2 system, freeze on
boot
Bug reassigned from package `linux-2.6' to `linux-2.6'.
> thanks
Stopping processing here.
Please contact me if you need ass
Processing commands for [EMAIL PROTECTED]:
> reassign 393329 linux-2.6
Bug#393329: After seemingly successful install on Turion X2 system, freeze on
boot
Warning: Unknown package 'linux-image-2.6.17-2-k7-smp'
Bug reassigned from package `linux-image-2.6.17-2-k7-smp&#
Package: linux-image-2.6.17-2-k7-smp
Severity: important
I installed Etch on my HP Pavilion DV6119US, which uses a Turion X2 TL-50
dual-core processor. After the install completed, I tried to boot off the
Linux partition, but received this message:
Checking TSC synchronization across 2 CPUs
And
9 matches
Mail list logo
