Package: linux-image-amd64
Version: 6.1.85-1
Severity: normal
Tags: upstream
X-Debbugs-Cc: robin.bjork...@gmail.com
Dear Maintainer,
We use Debian as our base image when running kubernetes and our kube-proxy
uses ipvs. We have been using the ip_vs_rr module to do round-robin
scheduling however
Package: linux-image-amd64
Version: 6.1.85-1
Severity: normal
Tags: upstream
X-Debbugs-Cc: robin.bjork...@gmail.com
Dear Maintainer,
When attempting to use fstrim on an XFS file system I found that it
trims a lot more than what I request.
When execusting this: fstrim -v --offset 0 --length 33
Package: linux-image-6.6.13+bpo-amd64
Version: 6.6.13
Severity: grave
The issue was fixed already in the 6.1 kernels, see
https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=1057843
From that bug report I read that all kernels are safe if both commits are
present:
91562895f803 ("ext4: properly
Hello Salvatore,
sorry for the delay. So lets hope, this will solve the problem for all
the affected people.
On Fri, 2023-03-10 at 17:11 +0100, Salvatore Bonaccorso wrote:
> Hello Marc-Robin,
>
>
> > Anyhow I had some errors:
> >
> > qla2xxx :61:00.1: swiotl
Package: iproute2
Version: 5.10.0-4
Severity: normal
Dear Maintainer,
I just came across a "stack smashing detected" crash when changing a gre6 to a
gre4 tunnel
To reproduce create an ipv6 gre tunnel:
> ip tunnel add gre1 mode ip6gre local 2001:db8::1 remote 2001:db8::2 ttl 255
And then attempt
:
qla2xxx :61:00.1: swiotlb buffer is full (sz: 65536 bytes), total
32768 (slots), used 28799 (slots)
But I'm not sure, if this is releated and it doesn't affect functions.
Do you need further informations about the testing process?
--
Greetings
Marc-Robin
On Wed, 2023-03-08 at 1
. donate a pretty much of
ressources to the Debian Project.
Greetings
Marc-Robin Wendt
On Mon, 2023-02-20 at 10:30 +0100, vmxevils...@gmail.com wrote:
> Hello dear mantainers,
>
> I have stopped sending kernel packages as per your request (you
> defined it spamming).
> For who m
Hello,
same problem here with linux-image-5.10.0-19-amd64 version 5.10.149-2.
Went back to kernel linux-image-5.10.0-17-amd64 ver. 5.10.136-1, which
still works fine.
Greetings
Marc
nd it shows up as all manner of
weird symptoms. The fix is this patch:
https://lore.kernel.org/linux-rockchip/20220902184543.1234835-1-pgwipe...@gmail.com/
Robin.
I don't know how to do next, thus send an email to comunity.
below is crash log with init=/bin/sh
/dev/mmcblk2p1: cle
.
Sounds like it's probably the same thing as being discussed over here:
https://lore.kernel.org/linux-iommu/2e899de2-4b69-c4b6-33a6-09fb8949d...@nxp.com/
Robin.
Package: firmware-amd-graphics
Version: 20190502-1
Severity: important
Dear Maintainer,
Not sure what changed but even though I have the vega20 firmware removed it
hung on boot.
-- System Information:
Debian Release: bullseye/sid
APT prefers unstable
APT policy: (500, 'unstable')
Architect
Package: firmware-amd-graphics
Version: 20190502-1
Followup-For: Bug #928631
Dear Maintainer,
Updating to any version of the firmware-amd-graphics with the vega20 firmware
causes my system to hang during boot after grub.
Removing all the vega20 firmware files and causing initrd to rebuild correc
running since February, but this bug only
happened recently.
Is it still happening on Debian Stretch with a 4.x kernel?
Thanks.
--
Robin THONI
NVIDIA
The recent backport kernel does *not* have this issue. All is fine with
4.14.0-0.bpo.3-amd64 #1 SMP Debian 4.14.13-1~bpo9+1 (2018-01-14)
This is on a Thinkpad X250 with 00:02.0 VGA compatible controller: Intel
Corporation HD Graphics 5500 (rev 09)
4.9.0-4-amd64 and 4.9.0-5-amd64 on the same box
Package: src:linux
Version: 4.9.65-3+deb9u1
Severity: normal
Dear Maintainer,
since linux-image-4.9.0-3-amd64 DKMS sends my system into suspend.
Switching off the monitor causes suspend of the system.
With Kernel-Versions linux-image-4.9.0-1-amd64 and linux-image-4.9.0-2-
amd64 I had no problems
Same issue with 4.9.0-4-amd64, same workaround (use 4.9.0-3-amd64)
Thinkpad X250
VGA compatible controller: Intel Corporation HD Graphics 5500 (rev 09)
What information would be relevant or useful to provide?
Your package fixed it for me too, thanks! As downgrading to 63 did.
Thinkpad X201T
--
To UNSUBSCRIBE, email to debian-kernel-requ...@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org
Archive: https://lists.debian.org/54b3d3ca.4050...@freenet.de
The two previous suggestions didn't fix it for me so I removed
rpcbind, nfs-common and nfs-kernel-server then reinstalled them one at
a time. That worked foe me.
Robin
--
To UNSUBSCRIBE, email to debian-kernel-requ...@lists.debian.org
with a subject of "unsubscribe". Trouble?
it for more tests if really necessary.
>
I used to have the same issues on one of my machines. The solution was
to buy a decent SAS/SATA HBA (I went with the Intel RS2WC080, but see
http://blog.zorinaq.com/?e=10 for a more complete list), which now works
perfectly with exactly the same
On Wed, Jan 25, 2012 at 05:24:09PM -0600, Jonathan Nieder wrote:
> Hi,
>
> Robin Lee Powell wrote:
>
> > OK, grub2, can't boot with squeeze's 2.6 amd64. This machine is on
> > openhosting.com, which significantly limits my ability to get
> > screenshot
On Wed, Jan 25, 2012 at 06:02:46PM -0600, Jonathan Nieder wrote:
> Robin Lee Powell wrote:
>
> > I did get it running, but I've no idea how. I assume I just
> > threw in a different kernel.
>
> Since you were running in a VM, maybe something near the fix to
> b
On 2011-04-25 03:48, Ben Hutchings wrote:
On Thu, 2011-04-21 at 22:53 +0200, Robin Axelsson wrote:
On 2011-04-21 21:22, Ben Hutchings wrote:
On Thu, Apr 21, 2011 at 09:05:14PM +0200, Robin Axelsson wrote:
On 2011-04-21 20:03, Debian Bug Tracking System wrote:
n Thu, Apr 21, 2011 at 05:41
On 2011-04-21 20:03, Debian Bug Tracking System wrote:
n Thu, Apr 21, 2011 at 05:41:29PM +0200, Robin Axelsson wrote:
> Package: Debian-testing-amd64-DC-1.iso (latest version converted to boot
> USB)
> Severity: Critical
> Platform: x86_64 Linux (also .386/i686)
>
&g
Package: Debian-testing-amd64-DC-1.iso (latest version converted to boot
USB)
Severity: Critical
Platform: x86_64 Linux (also .386/i686)
Description of problem:
Since I updated the firmware of my BIOS to a revision that supports AMD
IOMMU and turned that feature on, pretty much anything that runs
Problem solved.
I just added at the bottom of the file /etc/modprobe.d/alsa-base.conf :
options snd-hda-intel model=acer
Sorry to have disturbed the list kernel-debian.
--
Gérard
--
To UNSUBSCRIBE, email to debian-kernel-requ...@lists.debian.org
with a subject of "unsubscribe". Trouble? Conta
Hello,
Sorry, I am not developper, but I stick with a problem with my laptop
acer aspire 5102 wlmi (squeeze fxce4)
aplay -l
card 0: SB [HDA ATI SB], device 0: ALC883 Analog [ALC883 Analog]
Subdevices: 1/1
Subdevice #0: subdevice #0
lspci | grep Audio
00:14.2 Audio device: ATI Technologies In
Package: linux-2.6
Version: 2.6.32-29
Severity: minor
I upgraded from lenny (xfce4) to squeeze on my laptop (acer aspire 5102 wlmi)
I installed linux-image-2.6.32-5-686.
All works fine except the sound :
"alsamixer" doesn't give the option CD and "cdcd" works but no sound.
(however sound-juicer w
http://teddyb.org/~rlpowell/public_media/kernel_bug.PNG
Earlier it was stopping exactly at the "SCSI subsystem initiated"
line. I *think* the new lines got added after I reinstalled
linux-image-2.6.32-5-amd64 , but I'm not sure.
-Robin
--
http://singinst.org/ : Our last,
Package: linux-2.6
Version: 2.6.32-11
Severity: wishlist
Tags: sid
with the kernel linux-image-2.6.30-bpo.1-amd64 cdcd, cdtool, ..., grip
work fine but with the kernel linux-image-2.6.32-4-amd64 (and also the
2.6.33 in experimental) I can see the list of the tracks of a CD but I
can't hear them. A
if anyone knows of an
alternative or if they will be back at any time as this is an
invaluable resource.
Thanks!
Robin
--
To UNSUBSCRIBE, email to debian-kernel-requ...@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org
Hi,
on Donnerstag, 20. August 2009, Nicolas François wrote:
[...]
> Robin:
> * Would you still have the grub menu.lst you were using on Etch?
Nope, sorry.
> * Do you remember the version of the kernel which displayed "Waiting for
>root file system" (i.e. did gr
Hi Matt,
watchout, the latest firmware are expected to be incompatible with the Wifi
drivers included in Lenny (linux 2.6.26).
This is mentioned in the README file in the firmware distribution (cf.
iwlwifi-3945-ucode-15.28.2.8/README.iwlwifi-3945-ucode).
For example, the latest 2.6.26 compatible
On Sun, Dec 21, 2008 at 12:52:19AM +0100, Moritz Muehlenhoff wrote:
> On Tue, Apr 08, 2008 at 10:24:29AM -0500, Robin Holt wrote:
> > Package: linux-image-2.6.18-6-686
> > Version: 2.6.18.dfsg.1-18etch1
> > Severity: normal
> >
> > The system has a single
unarchive 449343
reopen 449343
thanks
The problem is still there.. That merged patch is for a different problem..
Please include this patch:
http://mactel-linux.svn.sourceforge.net/viewvc/*checkout*/mactel-linux/trunk/kernel/mactel-patches-2.6.25/applesmc-retry-when-accessing-keys.patch
--
To
Package: linux-image-2.6.25-1-amd64
Version: 2.6.25-1
Severity: critical
Justification: breaks unrelated software
mutt works perfectly with kernel 2.6.22 amd64 (package debian) in CM and with
xwindow
but when I use mutt with kernel 2.6.25-1-amd64 (package debian) it
freezes definitively my box
Package: linux-image-2.6.18-6-686
Version: 2.6.18.dfsg.1-18etch1
Severity: normal
The system has a single IDE connector on its motherboard. Connected to
this are two DVD burners used for weekly backups. The first week, both
drives successfully complete their burn. The following week, the first
42 04 85 c0 75 08
<0f> 0b 2c 01 01 a3 29 c0 f0 ff 4a 04 0f 94 c0 84 c0 74 07 89 d0
Message from [EMAIL PROTECTED] at Fri Mar 21 00:12:48 2008 ...
tribbin kernel: EIP: [] put_page+0x17/0x32 SS:ESP 0068:f6763de4
smtp
Regards,
Robin van Westrenen
-- System Information:
Debian Release: 4.0
On Sun, Jan 06, 2008 at 08:50:58PM +0100, maximilian attems wrote:
From: maximilian attems <[EMAIL PROTECTED]>
To: Gerard Robin <[EMAIL PROTECTED]>, [EMAIL PROTECTED]
Subject: Re: Bug#458429: linux-image-2.6.23-1-amd64: CPU#1 stuck for 11s
[wpa_supplicant: 2857]
On Mon,
Package: linux-image-2.6.23-1-amd64
Version: 2.6.23-2
Severity: critical
Justification: breaks the whole system
At the boot, after this line:
DHCPDISCOVER on ath0 to 255.255.255.255 port 67
I get:
Bug soft lokup CPU1# stuck for 11s [wpa_supplicant: 2857]
-8<---
and my box
tags 449343 + patch
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
Package: linux-image-2.6.22-3-amd64
Version: 2.6.22-5
Severity: normal
Module applesmc clutters the kernel log with the messages below.
Patch available at:
http://mactel-linux.svn.sourceforge.net/viewvc/mactel-linux/trunk/kernel/mactel-patches-2.6.22/applesmc-retry-when-accessing-keys.patch?view=l
Our company is looking for energetic and accountable individuals to occupy
Shipping Clerk positions throughout the USA. These vacancies are entirely
home-based and do not require any travel or relocation. They are also
suitable for students and senior citizens who are able to dedicate up
more. ;)
Anyway, I would suggest to reconsider the severity to wishlist.
Greetings
Robin
--
Robin Haunschild
<[EMAIL PROTECTED]>
http://www.tuxschild.de
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
during the logout my whole system hanged. No magic key worked. So I rebooted
via power off and power on.
Below is a cutout of my /var/log/messages.
Hope that helps.
Robin
Apr 30 11:17:05 localhost kernel: Modules linked in: ppdev lp ipv6 ipt_LOG
xt_tcpudp ipt_owner xt_state
ip_conntrack
Package: kernel-image-2.6.8-3-k7
Version: 2.6.8-16sarge6
Severity: normal
If I insert the powernow-k8 kernel module and my system is under load
afterwards, it freezes. I discovered it mostly through spamassassin. A log of
the most important kernel messages is
available at http://www.tuxschild.de/
corrupted.
This problem never happened when the machine was running an earlier
version of the kernel in etch (one of 2.6.16 or 2.6.17, I can't say
for sure).
Robin
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
Package: kernel-image-2.6.8-2-k7
Version: 2.6.8-13
Severity: normal
When connecting my USB flash drive to my machine, sometimes it will
cause the whole kernel USB system to lock up. After this, anything
trying to access the files in /proc/bus/usb freezes in the kernel, and
further USB events are i
Package: kernel-image-2.6.8-2-386
Version: 2.6.8-13
Severity: normal
Tryed
[EMAIL PROTECTED]:~# apt-get install kernel-image-2.6.8-2-386
Reading Package Lists... Done
Building Dependency Tree... Done
kernel-image-2.6.8-2-386 is already the newest version.
0 upgraded, 0 newly installed, 0 to remov
please note the message "XFree86: vm86 mode not supported on 64 bit
kernel" at the end of the log. I have just noticed it. May this issue
be related to XFree86?
dmesg on the amd64 flavoured kernel :
Bootdata ok (command line is BOOT_IMAGE=Linux ro root=801)
Linux version 2.6.8-10-amd64-k8 ([EMAIL
lsmod on the amd64-k8 kernel :
Module Size Used by
af_packet 23308 2
forcedeth 18432 0
amd74xx14768 1
ehci_hcd 30788 0
ohci_hcd 21252 0
eth139421840 0
ne2k_pci 10336 0
8390
* dmesg of 2.6.8-2-386 after boot and its lsmod :
v2.0 (20020519)
ACPI: Subsystem revision 20040326
ACPI: Interpreter enabled
ACPI: Using IOAPIC for interrupt routing
ACPI: PCI Root Bridge [PCI0] (00:00)
PCI: Probing PCI hardware (bus 00)
PCI: Transparent bridge - :00:09.0
ACPI: PCI Interrupt R
* lspci -vv (with 2.6.8-2-386)
:00:00.0 Memory controller: nVidia Corporation: Unknown device 005e (rev a3)
Subsystem: Micro-Star International Co., Ltd.: Unknown device 7125
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Sta
Subject: kernel-image-2.6.8-10-amd64-k8: Xfree86 fails to find a VESA chipset
Package: kernel-image-2.6.8-10-amd64-k8
Version: 2.6.8-11
Severity: important
*** Please type your report below this line ***
Hi,
I just installed Debian testing on a new Athlon64/nForce4 machine.
This machine boots cor
Actualy the SS5 (at least the one I have got here) does have the problem
for libc6 version I need a kernel above 2.4.21, and for that kernel I
need that libc6 version.
- Original Message -
From: "Steve Langasek" <[EMAIL PROTECTED]>
To: ;
Cc: <[EMAIL PROTECTED]>
Sent: Thursday, Marc
I installed a minimal basic "stable" installation of Debian (no packages
selected with tasksel or dselect)
when doing the upgade as stated on
http://higgs.djpig.de/upgrade/upgrade-kernel/ via the dpkg method.
I first needed to install zlib1g, ash and stat.
maby it is better to mention that those
I installed a minimal basic "stable" installation of Debian (no packages
selected with tasksel or dselect)
when doing the upgade as stated on
http://higgs.djpig.de/upgrade/upgrade-kernel/ via the dpkg method.
I first needed to install zlib1g, ash and stat.
maby it is better to mention that those
it right afther I finished my test with the debian
installer and filled in a report
I hope I will be able to help :)
Greetings
Robin Harmsen
[EMAIL PROTECTED]
http://www.rharmsen.nl
- Original Message -
From: "Frank Lichtenheld" <[EMAIL PROTECTED]>
To: ; ;
Cc: <[EMAIL
Martin Alain Kretschek writes:
Hi Horms,
Some more background... The machines I'm trying to install the
2.6.8-2-686-smp Debian kernel package are Dell PowerEdge 1850 with a
PERC 4e/Si RAID Controller model with one Hitachi 73,2GB SCSI Ultra320
HotSwap HD factory configured in RAID0.
I have almo
kernel is v2, and
should support the controller just fine
running mkinitrd:
uk2a:/home/robin# mkinitrd -o /tmp/initrd.img 2.6.8-2-686-smp
/usr/sbin/mkinitrd: add_modules_dep_2_5: modprobe failed
FATAL: Module megaraid2 not found.
WARNING: This failure MAY indicate that your kernel will no
mpile
The 2.6.9 image is the image I compiled.
Thanks in advance,
Robin Bultot
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
Hello,
I'm new to linux and i've completed my debian netinstall. Now when I
want to compile a new kernel I get an error:
VFS: Cannot open root device "sda3" or unknown-block(0,0)
Please append a correct "root=" boot option
Kernel panic: VFS: Unable to mount root fs on unknown-block(0,0)
I know th
808+ 7 HPFS/NTFS
/dev/sda6 13785 13836 417658+ 82 Linux swap
Thanks in advance,
Robin
the SATA driver.
I hope someone can help me, i'm busy with it for 3 days now...
Thanks in advance,
Robin
Christoph Hellwig a écrit :
> On Mon, Sep 13, 2004 at 09:37:23AM +0200, Milan Kuchta wrote:
>
>>Package: kernel-image
>>Version: 2.6.8-1-k7
>>Severity: critical
[...]
>>Kernel panic: Attempted to kill init!
>
> This looks very much like you're missing an initrd or something. How
> does your lilo/g
On Mon, Jul 05, 2004 at 20:10 -0300, Robin Blondon wrote:
Under 2.6, when I have i82365 and orinoco_cs in /etc/modules, lsmod
shows that yenta_socket is not loaded. "cardctl ident" says:
Socket 0:
cs: unable to map card memory!
cs: unable to map card memory!
no product info av
Per Olofsson wrote:
On Sat, Jul 03, 2004 at 08:58 -0300, Robin Blondon wrote:
Under 2.6, when I have i82365 and orinoco_cs in /etc/modules,
yenta_socket is not loaded and it doesn't look like it tries to load it
(I checked boot messages, dmesg, and syslog) but it does attempt to
Per Olofsson wrote:
On Thu, Jul 01, 2004 at 20:35 -0300, Robin Blondon wrote:
Actually, before I tried beta4 I tried tc1, and with both the 2.4 and
2.6 kernels the laptop locked up hard ealy in the boot process around
the point where the message "Setting up filesystem, please wait ..
Per Olofsson wrote:
On Thu, Jul 01, 2004 at 10:29 -0300, Robin Blondon wrote:
In addition, the network setup that I had working with 2.4 no longer
works with 2.6. I get errors with trying to load module memory_cs, which
doesn't exist. It looks like it is now trying to identify my wir
Per Olofsson wrote:
On Tue, Jun 29, 2004 at 21:22 -0300, Robin Blondon wrote:
If I choose to detect network hardware a second time without restarting
cardmgr it still fails to find the card. I need to either restart
cardmgr or reinsert the card.
I think that this problem is specific to
69 matches
Mail list logo
