Ok, I'm not sure about it but I think you must use something like:
append = "ether=0,0,12,eth0"
see HOWTO/BootPrompt for more details.
Hope this help
On Tue, 22 Feb 2000, t s a d i wrote:
>i compiled-in my 3c905 support to the kernel, i lookep up vortex.txt
> and the lilo mini howto alread
On Tue, 22 Feb 2000, t s a d i wrote:
ch4di >hello all,
ch4di >
ch4di > i compiled-in my 3c905 support to the kernel, i lookep up vortex.txt
ch4di >and the lilo mini howto already but i dont see anything as to how i may
ch4di >specify any options for my NIC to work at 100 Mbps ...
ch4di > can
hello all,
i compiled-in my 3c905 support to the kernel, i lookep up vortex.txt
and the lilo mini howto already but i dont see anything as to how i may
specify any options for my NIC to work at 100 Mbps ...
can someone please tell me how ?
TIA,
Chad
>
> Yes, if you don't set anything the
28, 2000 5:05 AM
Subject: Re: Locking Network At 100base T
>
> On Sun, 20 Feb 2000, Wilson Tuma wrote:
>
> > my network runs on 3com 3c905b-Tx Cards (does dual speed 10/100). as
well as 3coms superstack II dual speed hub. But I have never suceeded in
making the network run at 100base T.
I'm sorry, I don't know, I have only 3com cards.
Bye
On Mon, 21 Feb 2000 [EMAIL PROTECTED] wrote:
> Are these media type settings valid only for 3COM-NIC or also for other
> NIC's such as Asante for example?
> This document describes the usage and errata of the 3Com "Vortex" device
> driver for Linux.
>
> This driver supports the following hardware:
> 3c590, 3c592, 3c595, 3c597
>
> When loaded as a module the following variables may be set:
> nametype description
> debug intThe
On Sun, 20 Feb 2000, Wilson Tuma wrote:
> my network runs on 3com 3c905b-Tx Cards (does dual speed 10/100). as well as
> 3coms superstack II dual speed hub. But I have never suceeded in making the
> network run at 100base T. Is there a way using debian to lock the speed of
> the network cards
ifconfig may be able to lock the speed when you
setup the eth0 interface.
Networks do not run at 100BaseT though, it's the
individual links that can run at whatever speed - are you saying that the link
light on your stack from the 3c905b card is only showing 10BaseT?
What driver in the Ke
8 matches
Mail list logo
