Package: rt2x00-source
Version: 0cvs20060928-1
Driver is run in WPA-PSK mode (wpa_supplicant). Driver is not able to reconnect
after AP's (Zyxel Prestige P660HW-T7C) period for re-authentication has timed
out (factory default is 1800 secs.). In the Access Point's configuration this
can be set
Package: openoffice.org-writer
Version: 2.0.4.dfsg.2-5
Severity: normal
Openoffice Writer shows the dots in a table of contents in slightly
irregular distances. You can see the effect in the enclosed document.
When printing, the distances remain the same, so this is not only a
display problem.
-
Package: stellarium
Version: 0.9.1-4
Severity: important
Stellarium does not start from Gnome menu.
Launching Stellarium from command line results in the following error
message (german language):
stellarium: main/renderbuffer.c:2153: _mesa_reference_renderbuffer:
Zusicherung »oldRb->Magic == 0
Hi,
attached the patch to fix the bug.
--
regards,
ulf
diff -u sendfile-2.1b/src/sendfile.c sendfile-2.1b/src/sendfile.c
--- sendfile-2.1b/src/sendfile.c
+++ sendfile-2.1b/src/sendfile.c
@@ -1709,7 +1709,7 @@
fflush(stdout);
snprintf(MAXS(cmd),"%s < '%s' >
Package: lxde
Version: 10+nmu1
Followup-For: Bug #876010
X-Debbugs-Cc: un.oslonor...@gmail.com
Dear maintainer!
After full-upgrade from buster to bullseye _lxpanel_ is sometimes not present.
Restart of lightdm helps, sometimes multiple restarts are needed.
Output of ps -efx for OK and NOK case i
playing and then exit the program. An example
can be found in this session capture:
[EMAIL PROTECTED]:~$ cat /var/games/rockdodger.scores
109782 Ulf
29846 Ulf
13000 Pad
12500 Pad
6500 Pad
5000 Pad
3000 Pad
2500 Pad
[EMAIL PROTECTED]:~$ ln -s /var/games/rockdodger.scores .xshisenrc
[EMAIL PROTECTED
well.
// Ulf Harnhammar
-- System Information:
Debian Release: 3.1
APT prefers testing
APT policy: (500, 'testing')
Architecture: i386 (i686)
Kernel: Linux 2.6.8-1-686
Locale: LANG=en_US, LC_CTYPE=en_US (charmap=ISO-8859-1)
Versions of packages ltris depends on:
ii libc6
milar, man2html will crash when viewing it. There is a printf()
call that uses the .SH data as the format string instead of using "%s" as the
format string and that data as a parameter.
I have attached a patch as well as a man page that exhibits this problem.
// Ulf Harnhammar
-- System In
UU/.scummvmr
c!
Segmentation fault
[EMAIL PROTECTED]:~$
// Ulf Harnhammar
-- System Information:
the options file for read:
UU/.penguin-command
The error that occured was:
No such file or directory
Fatal signal: Segmentation Fault (SDL Parachute Deployed)
[EMAIL PROTECTED]:~$
// Ulf Harnhammar
-- System Information:
Debian Release: 3.1
APT pref
all instances of:
syslog(BLAH, str);
to:
syslog(BLAH, "%s", str);
// Ulf Harnhammar
-- System Information:
Debian Release: 3.1
APT prefers unstable
APT policy: (500, 'unstable'), (500, 'testing')
Architecture: i386 (i686)
Kernel: Linux 2.6.8-2-686
Locale: LANG=
faults. I have attached a webalizer.conf file that causes this
problem
in two different ways.
The third overflow is an off-by-one bug in the DNS handling.
I have attached a patch that corrects all three issues.
// Ulf Härnhammar, Debian Security Audit Project
-- System Information:
Debian Release
The dependency update happens automatically on recompiling.
In order to recompile with libpisock-dev 0.11.8-0.12.0-pre4-3 from
experimental, you seem to have to apply this little patch:
diff -ru evolution-2.4.1/addressbook/conduit/address-conduit.c
evolution-2.4.1_new/addressbook/conduit/addres
.
I have attached the archives oflow333.alz (for sarge) and oflow1621.alz
(for testing and unstable), as well as the program alzgen.pl that
generated them and a patch that corrects this issue.
It is also possible to upgrade to the latest upstream version 0.53,
which also corrects it.
// Ulf
d stability.
I have attached a patch and the mailbox I used in the example above (it should
work
with any mailbox file, though).
// Ulf Harnhammar
-- System Information:
Debian Release: 3.1
APT prefers testing
APT policy: (500, 'testing')
Architecture: i386 (i686)
Shell: /bin/sh l
| Talking about severities: We will not delay sarge because slapd has a
| performance problem for one user.=20
I guess this is a disputable decision.
This makes sarge unusable for an ldap server. Our whole ldap system (a
few hundred users involved) was repeatedly blocked by this bug,
because
Subject: rats: typos in help text
Package: rats
Version: 2.1-3
Severity: minor
I have noticed some typos in rats' help text. Here is a patch.
// Ulf Härnhammar
-- System Information:
Debian Release: 3.1
APT prefers testing
APT policy: (500, 'testing')
Architecture: i386 (i686
File: test.c Line:8
printf(a, "alert(31337)");
Inputs detected at the following points
Total lines analyzed: 12
Total time 0.007055 seconds
1700 lines per second
[EMAIL PROTECTED]:~/rats-test$
I have attached a patch.
// Ulf Härnhammar
-- System Information:
Debian Release
g gzip versions are affected: 1.2.4, 1.2.4a, 1.3.3,
1.3.4 and 1.3.5.
I have attached the compressed file "dir-traversal-bug.gz" that will create
a file in "/tmp" when decompressed with "gunzip -N". I have also attached a
patch.
// Ulf Härnhammar
-- System Informatio
Pawel, would it help if I changed the patch so it only
does this when decompressing?
// Ulf Härnhammar
shell. However, BitchX isn't
setuid so it doesn't give me any additional privileges.
On the other hand, it can't hurt to patch this.
// Ulf Härnhammar
-- System Information:
Debian Release: 3.1
APT prefers testing
APT policy: (500, 'testing')
Architecture: i386 (i686)
Subject: chkrootkit: new version available
Package: chkrootkit
Version: 0.44-2
Severity: wishlist
Hello,
there's a 0.45 version out now since February 2005. Please consider packaging
that.
It's important to keep this type of program updated.
// Ulf Härnhammar
-- System Informati
Package: installation-reports
Debian-installer-version: sarge-i386-netinst.iso (rc3 and nightly build
20050421)
uname -a: n/a
Date: 22.04.2005
Method: boot from above mentioned cd (IDE)
Machine: HP ProLiant ML110 with Adaptec 2610SA 6-port SATA-RAID (some
OEM-stuff also found in DELL servers)
Pro
ames, which
makes it possible to unpack to arbitrary locations in the file system.
Read more here:
http://secunia.com/advisories/12857/
http://securitytracker.com/alerts/2004/Oct/1011673.html
http://www.securityfocus.com/bid/11417/info/
// Ulf Härnhammar
-- System Information:
Debian Release: 3.1
>From: Christian Perrier [mailto:[EMAIL PROTECTED]
>Sent: Monday, April 25, 2005 11:15 AM
>To: [EMAIL PROTECTED]
>Cc: Mueller, Ulf
>Subject: Re: Bug#305844: (forw) RE: Bug#305844: Package:
>installation-reports
>
>
>> [EMAIL PROTECTED] more /proc/scsi/scsi
>&
>From: Christian Perrier [mailto:[EMAIL PROTECTED]
>Sent: Monday, April 25, 2005 9:14 PM
>To: Mueller, Ulf; [EMAIL PROTECTED]
>Subject: Re: Bug#305844: (forw) RE: Bug#305844: Package:
>installation-reports
>
>
>> >Could you try again with Knoppix and later issued a
> I'm still not sure if the user of basename()
> instead of base_name() is the correct thing to do here.
It's the same function, so it should be correct.
// Ulf
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
Martin Michlmayr <[EMAIL PROTECTED]> writes:
| * Ulf Betlehem <[EMAIL PROTECTED]> [2004-08-30 10:12]:
| > | > I call cplay from a shell script which at runtime assembles a
| > | > playlist. Therefore a "-q" option for quitting automatically after
| > | >
Martin Michlmayr <[EMAIL PROTECTED]> writes:
| Ulf,
|
| Georg Lehner reported that it is currently impossible to pass an URL
| (a stream) to cplay on the command line:
|
| * Georg Lehner <[EMAIL PROTECTED]> [2005-01-05 02:45]:
| > The following patch makes cplay convert relati
Martin Michlmayr <[EMAIL PROTECTED]> writes:
| Hi Ulf,
|
| Georg Lehner made the following feature request:
|
| * Georg Lehner <[EMAIL PROTECTED]> [2005-01-05 02:45]:
| > It also adds a command line switch: -d dir, with which one can enter
| > an initial directory instead of
Hello,
here is a better patch. It removes the directory part of the
filename when it is read from the .gz file, and not when opening
it, so the earlier side effects should disappear now.
// Ulf
--- gzip.c.old 2005-04-28 01:45:23.405819616 +0200
+++ gzip.c 2005-04-28 02:10:35.386963544
I have tested the *upstream* 0.8.14-rc3, and it fixes almost
all issues mentioned in this bug report.
If you select "Show HTML messages" under Options and then view the
message ilohamail1.msg, there will still be an XSS bug.
// Ulf Harnhammar
--
To UNSUBSCRIBE, email to [EMAIL
as who knows
> when a certain browser will actually include yet another such scheme and
> start to do funny things with it. A whitelist would also be tricky
> though.
FWIW, my HTML/XHTML filter kses ( http://sourceforge.net/projects/kses )
includes a whitelist for URL protocols. It also checks for all the above
problems.
// Ulf Härnhammar
veral reports about problems with some sarge versions.
The funny thing is that our setup worked well in an experimental
setting with 20 users for about two months, but when we went into
production with the whole system (300 clients, ~1000 users), we
experienced significant problems.
Best regards
that sends a copy of
the e-mails to the From address, if COPYTOFROMADDRESS is set to "yes".
Please consider including this patch in the program.
// Ulf Harnhammar
-- System Information:
Debian Release: testing/unstable
APT prefers testing
APT policy: (500, 'testing')
Arch
stale
file handles after a couple of hours, so we also had to downgrade
nfs-common (which belongs to the same software package nfs-utils) in
order to obtain a stable system.
Ulf Rehmann
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
/popularity-contest/default.conf for more info
# on the options.
MY_HOSTID=[[censorship]]
PARTICIPATE="yes"
MAILFROM="[EMAIL PROTECTED]"
USEHTTP="no"
COPYTOFROMADDRESS="yes"
As you can see, both files say USEHTTP="no", so the "use-http: true"
data in reportbug looks a bit weird.
// Ulf
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
~/.trackballs
$ ln -s /var/games/gnometris.scores ~/.trackballs/metaur.gmr
$ ln -s /tmp/testing ~/.trackballs/settings
$ ls -al /tmp/testing
ls: /tmp/testing: No such file or directory
$ cat /var/games/gnometris.scores
31.00 1105059399 Ulf Harnhammar
$ ls -al ~/.trackballs/
total 12
drwxr-xr-x 2
Subject: bumprace: 290706 isn't really closed
Package: bumprace
Version: 1.4.6-3
Severity: normal
1.4.6-3 doesn't fix bug #290706, which is archived by now. Try the perl command
and the attached .bumprace file and you'll see that it still crashes in both
cases.
// Ulf Härnha
ypassed by using allowed HTML elements with dangerous attributes like style
or onMouseOver. A better fix would be to incorporate an HTML stripper library,
like, ahem, my own library kses ( http://sourceforge.net/projects/kses ) or any
similar program.
I have CC'ed upstream.
// Ulf Härnhammar
Am Dienstag, den 06.09.2005, 18:49 +0530 schrieb Y Giridhar Appaji Nag:
> Ulf, can you please check if it works for you as well?
Sorry for the delay. Yes, the patch cures my problem!
Thank you very much,
--
Ulf Rompe
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject
No, you don't need to set up a rogue CDDB server, as CDDB servers let anyone
add or modify information about records.
http://www.freedb.org/modules.php?name=Sections&sop=viewarticle&artid=26
// Ulf
--
___
Surf the Web in a faster, saf
e to trust the
freedb.org people 100%, which I'm not willing to do. (I trust debian.org and
ftp.sunet.se where I download .debs from, but they both have a reputation and a
history.)
// Ulf
--
___
Surf the Web in a faster, safer and easier way:
Download Opera 8 at http://www.opera.com
Powered by Outblaze
Package: webalizer
Version: 2.01.10-26
Severity: important
We are using webalizer in a production environment at Studentersamfundet
in Trondheim. Our problem is that, although we've specified the Quiet
and ReallyQuiet in webalizer.conf, it still seems to run with the
verbose variable specified in
bled by a
> customizable variable, but still good.
I will make the necessary changes to u-vm-color.el the next days.
(I am a Debian user myself and will be happy to make a small contribution
to the Debian project this way.)
Cheers,
ulf
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
wit
eases.
>
> Please think about it!
Well... I was thinking of a *small* contribution... ;-)
Can you give me an estimate how much time that would require? Just the
order of magnitude?
Cheers,
ulf
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
about when to
> release a new package and upload to Debian. I'd let you address all
> bugs concerning that package. I expect most of the work to continue to
> occur mostly in the binary package emacs-goodies-el itself. You might
> see very few bugs if any.
OK. Where do I have to s
Package: imapfilter
Version: 1:1.1-1
Severity: grave
Justification: renders package unusable
imapfilter dies after setting up an imap connection:
LANG=C imapfilter -v
S (3): * OK [CAPABILITY IMAP4rev1 UIDPLUS CHILDREN NAMESPACE
THREAD=ORDEREDSUBJECT THREAD=REFERENCES SORT QUOTA IDLE ACL ACL2=UNI
If you don't want to upgrade to 2.3.7, which is unstable, you
can use our unofficial patch:
o http://www.sitic.se/dokument/evolution.formatstring.patch
// Ulf
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
Subject: supertux: New upstream version
Package: supertux
Version: 0.1.2-4
Severity: wishlist
Hello,
there's a new upstream version (0.1.3) of supertux at their new homepage:
o http://developer.berlios.de/project/showfiles.php?group_id=3467
Please consider packaging it.
// Ulf Harnh
orm to the DFSG, so these
files must be removed from main.
As an aside, the debian/copyright file for wget only lists the license for the
wget program and not the license for the wget documentation.
// Ulf Harnhammar
-- System Information:
Debian Release: testing/unstable
APT prefers testing
PM you use.
This was reported to upstream a few months ago:
o http://issues.apache.org/bugzilla/show_bug.cgi?id=40733
// Ulf Harnhammar
metaur:~# fgrep ftpspecial /etc/services
ftpspecial 1096/tcp
ftpspecial 1096/udp
metaur:~# tail -n2 /etc/inetd.conf
ftp stream tcp no
tags 292264 patch
thanks
Here's a patch for this bug. It may not be a very important one, but I like
to reduce the number of ways that computer programs can crash.
// Ulf
--- src/options.c.old 2005-03-13 15:52:46.0 +0100
+++ src/options.c 2006-12-12 22:47:35.0 +0100
@@
I've just verified that elog in stable is vulnerable to
all issues mentioned in bug #392016.
// Ulf
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
visories/18124/
o http://secunia.com/advisories/22057/
Regards, Ulf Harnhammar
--- src/elogd.c.old 2006-11-28 12:25:59.0 +0100
+++ src/elogd.c 2006-12-02 20:37:44.0 +0100
@@ -9685,7 +9685,7 @@ void show_edit_form(LOGBOOK * lbs, int m
rsprintf("- %s -\n&
as well as in the upstream ELOG-2.6.2 version. I haven't checked
any other versions (but the upstream SVN trunk looks like it also
has these bugs).
// Ulf Harnhammar, Debian Security Audit Project
http://www.debian.org/security/audit/
--
___
nt to check out some earlier buffer overflows in
xshisen
that Steve Kemp found in 2003: http://bugs.debian.org/213957
// Ulf Harnhammar for the Debian Security Audit Project
http://www.debian.org/security/audit/
-- System Information:
Debian Release: 3.1
APT prefers testing
APT po
like webmin (I think)
and more.
It's not a really serious bug, but IMHO worth fixing.
--
Ulf Harnhammar
http://www.advogato.org/person/metaur/
0x2f55 794121557
eip0x63727369 0x63727369
eflags 0x210246 2163270
cs 0x73 115
ss 0x7b 123
ds 0x7b 123
es 0x7b 123
fs 0x0 0
gs 0x33 51
(gdb) q
The program is runn
would have been
a
security issue, but it isn't. Nevertheless this should be fixed to avoid
irritating
crashes. I have attached a patch.
// Ulf Harnhammar
-- System Information:
Debian Release: 3.1
APT prefers unstable
APT policy: (500, 'unstable'), (500, 'testing')
Archite
h, as well as a ~/.bumprace file that exhibits
the second problem. ( To test the first problem, just do a HOME=`perl
-e 'print "U" x 256;'` bumprace -w )
// Ulf Harnhammar
-- System Information:
Debian Release: 3.1
APT prefers testing
APT policy: (500, 'testing'
thought that 40
bytes might not be enough.
// Ulf Harnhammar
-- System Information:
Debian Release: 3.1
APT prefers testing
APT policy: (500, 'testing')
Architecture: i386 (i686)
Kernel: Linux 2.6.8-1-686
Locale: LANG=en_US, LC_CTYPE=en_US (charmap=ISO-8859-1)
Versions of packages b
.c. You can test the bug
by playing well enough to reach the high score table and then entering
"%n%n%n%n" as your name. I have attached a patch.
// Ulf Härnhammar
-- System Information:
Debian Release: 3.1
APT prefers testing
APT policy: (500, 'testing')
Architecture: i386
open
/usr/share/games/trackballs/icons/trackballs-32x32.png
Try shutting down artsd/esd or run trackballs through artsdsp/esddsp
Fatal signal: Segmentation Fault (SDL Parachute Deployed)
[EMAIL PROTECTED]:~$
// Ulf Härnhammar
-- System Information:
Debian Release: 3.1
APT prefers testing
A
reopen 297646
thanks
The 1.0.0-8 version doesn't fix the bug.
// Ulf Härnhammar
ok through the whole database. There
might be many more outdated entries.
Ulf Schaper
-- System Information:
Debian Release: 3.1
APT prefers unstable
APT policy: (990, 'unstable'), (500, 'testing')
Architecture: i386 (i686)
Kernel: Linux 2.4.27ulf1
Locale: LANG=C, LC_CTYP
user answered correctly, this means in the case of the
presidents that the program is going to tell me the whole name even if I
only know the last name.
As this is the first patch I ever wrote, please apologize any
imperfection and tell me about it :-)
Best wishes,
Ulf Schaper
*** patch_answer
--
l buffer overflows have the identifier CAN-2005-0160, and the directory
traversal bugs have the identifier CAN-2005-0161.
I have attached some test archives and a patch.
// Ulf Härnhammar for the Debian Security Audit Project
http://www.debian.org/security/audit/
-- System Information:
De
I am sorry to report that the package above did not work. I can see my
AP by "iwlist scan" but it does not associate.
I have attached some results of the test. Switching back to 20060928
made the system working again with the same configuration files (old
bugs are back again, too).
Re
http://www.imagehosting.com/out.php/i485806_rr5F.gif
I'm sure you would have.
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
There wasn't anything to say.
AN ALLE FINANZINVESTOREN!
DIESE AKTIE WIRD DURCHSTARTEN!
FREITAG 20. APRIL STARTET DIE HAUSSE!
REALISIERTER KURSGEWINN VON 400%+ IN 5 TAGEN!
Symbol: G7Q.F
Company: COUNTY LINE ENERGY
5 Tages Kursziel: 0.95
Schlusskurs: 0.21
WKN: A0J3B0
ISIN: US2224791077
Markt: Fra
table Checking setting useful know displays
http://img444.imageshack.us/img444/7708/tgnd8.jpg
Internet two computers same type office
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
Subject: zabbix-server-mysql: remote security problems
Package: zabbix-server-mysql
Version: 1:1.1.2-2
Severity: grave
Justification: user security hole
Tags: security patch
Hello,
Max Vozeler and Ulf Harnhammar from the Debian Security Audit Project
have found a number of format string bugs and
s possible.
// Ulf Harnhammar
-- System Information:
Debian Release: testing/unstable
APT prefers testing
APT policy: (500, 'testing')
Architecture: i386 (i686)
Shell: /bin/sh linked to /bin/bash
Kernel: Linux 2.6.12-1-686
Locale: LANG=en_US, LC_CTYPE=en_US (charmap=ISO-8859-1)
r/bin/svnshell", line 40, in __init__
self.cmdloop()
File "/usr/lib/python2.4/cmd.py", line 142, in cmdloop
stop = self.onecmd(line)
File "/usr/lib/python2.4/cmd.py", line 219, in onecmd
return func(arg)
File "/usr/bin/svnshell", line 184, in
Package: kdeprint
Version: 4:3.5.5a-2
Followup-For: Bug #392052
After upgrading kdelibs to version 3.5.5a-2 I still get the error
message that kprinter can't connect to the local cups server and obtain
the printer list. A http access to localhost:631 is working. No error messages
in
/var/log/cups
I'll see what I can do.
// Ulf
--
___
Surf the Web in a faster, safer and easier way:
Download Opera 9 at http://www.opera.com
Powered by Outblaze
Package: kopete
Version: 3.5.5-1
Tags: l10n
Similar to the older bug #267749, my kopete has a problem with non-ascii
characters (at least) in ICQ messages, especially the german umlauts.
They are not displayed as a chinese sign but just as a white space.
Sometimes however the following (probably a
Package: kdeprint
Followup-For: Bug #392052
Finally I got it working again. In the config file
~/.kde/share/config/kdeprintrc I had to remove the section [CUPS] which
consists of
[CUPS]
Host=localhost
InstallDir=
Login=uleichsenring
Port=631
SavePassword=false
After removing these entries, kpri
patch).
Do you see any chance to adapt the patch and include it in the next
releases? AlsoŠ we should potentially forward to patch to upstream.
TIA
Ulf
-- System Information:
Debian Release: 6.0.8
APT prefers oldstable-updates
APT policy: (500, 'oldstable-updates'), (500, 'olds
Package: openchangeserver
Version: 1:1.0-3
Cannot install the openchangeserver package because samba4 package is missing.
...
# aptitude install -y openchangeserver
The following NEW packages will be installed:
openchangeserver{b}
0 packages upgraded, 1 newly installed, 0 to remove and 0 not
Package: samba4
Version: 4.0.0~beta2+dfsg1-3.2+deb7u2
The samba4 package is missing.
...
# aptitude install -y samba4
No candidate version found for samba4
No candidate version found for samba4
No packages will be installed, upgraded, or removed.
0 packages upgraded, 0 newly installed, 0 to
Package: gnome
Version: 1:3.4+7
Severity: important
Dear Maintainer,
I was not doing anything special. It occured right after installation. I just
configure email, the printer, and tried to set up a vpn to my university.
I tried to install the closed drivers, but now i only was thrown into fall
I think this bug is resolved. At least I cannot reproduce it anymore with a
Lenny install on the same hardware.
--
To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org
I was just trying to build a package from the 2.2.0 tarball available
on the netatalk homepage, and I found two more issues where it
wouldn't build:
libatalk/util/server_ipc.c:266 unused variable
etc/afpd/afp_asp.c:36 can't find globals.h import
The first is easy to fix. The second probably refers
Hi Leon,
On Mon, Sep 5, 2011 at 10:45 PM, Leon Kuchenbecker wrote:
> Hi Ulf,
>
>> libatalk/util/server_ipc.c:266 unused variable
>
> That should be just a warning?
maybe. I copied over the debian directory from the source package in
sid, and compiled with (almost) standa
lenny system around to try it, either. The system
that originally exhibited the problem has been upgraded to wheezy in the mean
time, so there is hardly a chance to reproduce the exact setup.
ulf
--
To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org
with a subject of "unsu
Package: php5
Version: 5.3.3-7+squeeze8
Severity: normal
Today I found the following files in /
root@devs:~# ls /
?? ?? bin ?
sharedscripts
postrotate
/etc/init.d/apache2 reload > /dev/null
endscript
}
However, I can't really see why this should spit out random files in / .
All other cron jobs seem unrelated.
Ulf
--
To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org
with
nly actually doing anything on sunday. So maybe it's a
logrotate issue after all. Maybe logrotate cannot handle error messages
from postrotate scripts. However, that wouldn't explain the occurences
on non-sundays.
Ulf
bug.tar.gz
Description: GNU Zip compressed data
> last shot - is your filesystem health ok?
>
It happens on two virtual machines running on the same host server.
They're similar but it seems unlikely that they'd suddenly both develop
the same defect in their file systems. Obviously the problem is that PHP
doesn't know where to put its logs
The effect is perfectly reproducible, but only on those two systems.
Even with the exact same apache and php configs I cannot reproduce the
effect on a third computer, though. Unfortunately I cannot recreate the
exact same set of packages there at the moment. Steps are as follows:
1. Change the co
:
systemctl enable lvm2-cluster-activation.service
systemctl start lvm2-cluster-activation.service
About the cman.service - it comes from LSB script /etc/init.d/cman
(package: cman) and is used to start dlm (and other stuff...).
Best,
Ulf
On 13:31 Mon 13 Jun , Andreas Henriksson wrote:
> Ulf Norb
On 12 August 2014 at 06:01, Yunpeng Gao wrote:
> From: Chuanxiao Dong
>
> During kernel boot, it will try to read some logical sectors
> of each block device node for the possible partition table.
>
> But since RPMB partition is special and can not be accessed
> by normal eMMC read / write CMDs,
LLVMExports.cmake are both located in
/usr/share/llvm-3.5/cmake/
I fixed this by looking for the include files relative to the config file.
include("${CMAKE_CURRENT_LIST_DIR}/LLVMExports.cmake")
I think this patch will fix the the error caused by calling
find_package(LLVM REQUIRED CONF
Package: clvm
Version: 2.02.111-2.2
Followup-For: Bug #796625
Hi,
we run a storage cluster with CLVM+GFS2 and have been hit by this
problem. LSB service clvm.service gets deleted from the start up
sequence by systemd because of dependency conflicts. journalctl
shows:
systemd[1]: Found ord
Package: gnome-power-manager
Version: 2.18.2-1
Severity: normal
*** Please type your report below this line ***
On a Lenovo Thinkpad R60 laptop, gnome-power-manager does not recognise
that the machine is a laptop. In consequence, battery status is not
considered.
The battery is properly recognize
I did not experience this bug anymore for a long time; I can't tell
which version fixed it.
signature.asc
Description: PGP signature
I see this problem, too (Debian unstable, i386, OO 2.4.0 rc1~2). When OO
recovers the document, the data copied to the clipboard appears in the
cell where trying to enter data caused the crash.
--
Ulf Mehlig<[EMAIL PROTEC
B854658f
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
1 - 100 of 136 matches
Mail list logo
