Hi Juergen,
is this still an issue with newer CUPS versions?
I tried this with Debian Jessie on the host and in the KVM virtual
machine (CUPS version is 1.7.5-11+deb8u1) with a virtual NAT network and
it works for me.
I attach my modified version of the file "/etc/cups/cupsd.conf" of the
host ma
The respective assertion is added by Debian patch "check-thread".
For testing purposes, I rebuilt the package without that patch. In that
case, the crash does not occur. (But that probably leads to other
problems...).
Regards,
Michael
Hi Samuel,
thank you for your quick fix.
On 08/11/16 23:19, Samuel Thibault wrote
>
> Alex, are you perhaps using a screen reader? I would be very surprised
> if you are getting this while no screen reader is currently running,
> and I'm interested in a reproducer. It's definitely an issue in
Hello,
On 09/11/16 00:02, Samuel Thibault wrote:
> It should produce a warning instead of a crash, yes.
>
> You can already fetch it from
>
> deb http://incoming.debian.org/debian-buildd buildd-unstable main contrib
> non-free
I can confirm the issue is fixed in the new version. The followin
Package: accerciser
Version: 3.22.0-1
Severity: normal
Dear Maintainer,
when gir1.2-rsvg-2.0 is not installed and I try to start accerciser,
it crashes on start.
Console output:
~~~
$ accerciser
/usr/bin/accerciser:48: PyGIWarning: Gtk was imported without specifying a
version first. Use gi.r
On Wed, 15 Jul 2015 05:57:59 +0200 treaki wrote:
> Package: pdfsam
> Version: 1.1.4-2
> Severity: important
>
> Dear Maintainer,
>
> i have followed the instructions given by pdfsam-console but it isnt working
> as aspected...
>
> treaki@hostname:~/[...]/p01$ pdfsam-console -compressed -f page
On 2016-05-08 15:10, Bernhard R. Link wrote:
>
> Could you try attached file? It should fix your issue and also add
> support for the "+b/" notation reprepro allows.
Thank you very much!
"REPREPRO_BASE_DIR" works perfectly for me.
However, I think that "REPREPRO_CONFIG_DIR" would have to be use
Package: unattended-upgrades
Version: 0.92
Severity: normal
Dear Maintainer,
as far as I can see, changing the setting whether upgrades should
automatically be downloaded and applied does not work with debconf in
noninteractive mode.
The corresponding debconf parameter is
"unattended-upgrades/en
On 2016-05-24 04:20, James Valleroy wrote:
> Is there a way to accommodate this, while also preserving local
> changes during an upgrade?
Thank you for your quick reply. Reading that post helped me better
understand the problem and how everything is related with each other.
On further research, I
ts:
ii gnupg-agent 2.1.11-7
pn inoticoming
pn lzip
-- no debconf information
>From 5559a564009c07611d7959283d6ea5d3e1afa7e4 Mon Sep 17 00:00:00 2001
From: Michael Weghorn
Date: Sat, 23 Apr 2016 15:39:45 +0200
Subject: [PATCH] bash completion: Support REPREPRO_{BASE,CONFIG}_DIR
Package: cups
Version: 2.0.3-10
Severity: normal
Dear Maintainer,
when printing a PDF file to a printer set up with the attached PPD file
"tofile-boomaga.ppd" and the CUPS "file" backend, no output file is actually
created.
Steps to reproduce:
* allow setting up file devices in CUPS by adding/mo
Hello Brian,
thank you very much for your quick reply.
> Can we think in terms of bug #771259? I've tested with cups 1.7.0-2 and
> ${HOME}/tofile-boomaga is produced. Not so with cups 1.7.1-1.
The cause indeed seems to be the same. I just rebuilt the CUPS packages
currently in Jessie (version 1.
Hi,
I have searched in Mozilla's bug tracker.
There is an upstream Thunderbird bug report which looks to me like it
was dealing with the same issue:
https://bugzilla.mozilla.org/show_bug.cgi?id=312593
Best regards,
Michael
Hi Andreas,
thank you very much already for taking the time to look at this and for
the detailed analysis.
Best regards,
Michael
Hi Andreas,
On 2015-10-24 21:44, Andreas Cadhalpun wrote:
> I've discussed this with ffmpeg upstream developers and it turns out
> that fixing the assembler code was feasible, after all.
> It is now fixed upstream in commit 52f84d8 [1].
> Actually, it had been reported before in above trac ticket,
Package: vlc
Version: 2.2.1-4
Severity: important
Dear Maintainer,
when watching particular WebM videos with increased speed, VLC often crashes
due to a segmentation fault.
When watching the same video multiple times, the segmentation fault does not
always occur and if so, it may occur at diffe
The attached file contains the VLC output and the GDB backtrace.
Please let me know whether I can provide any additional information that
is useful.
$ while true; do gdb -ex run -ex quit --args vlc -vvv --play-and-exit --rate 2.5 http://download.media.tagesschau.de/video/2015/1012/TV-20151012-2022
Package: cups-pdf
Version: 2.6.1-20
Severity: normal
Dear Maintainer,
sending a print job with multiple print files to the cups-pdf printer
does not work as expected.
When trying to print three or more files in one print job, the print job
seems to "hang" and does not disappear any more. Subsequ
When sending multiple files in a single print job, the file passed to
the cups-pdf backend seems to contain all of the single files (converted
to PostScript) concatenated.
cups-pdf stops reading the input file after "the first PostScript file"
has been read.
The following patch disables that b
Sorry, I forgot to attach the patch to my previous email.
Here it is.
Best regards,
Michael
On 2015-11-17 10:58, Michael Weghorn wrote:
[...]
The following patch disables that behaviour. After applying the patch,
printing multiple files works.
The patch is only meant to demonstrate this
Package: python-ldap3
Version: 0.9.4.2-1
Severity: minor
Dear Maintainer,
the package description says:
"This package contains the Python 3.x version of the library."
However, the package is for Python version 2.x.
The package for Python 3.x is actually called "python3-ldap3".
-- System Informa
Hi,
related upstream bug report:
https://bugzilla.gnome.org/show_bug.cgi?id=777523
Ubuntu has included the mentioned workaround in their package; bug
report:
https://bugs.launchpad.net/ubuntu/+source/network-manager/+bug/1681513
Regards,
Michael
Package: pdfsam
Version: 3.2.5-1
Severity: normal
Dear Maintainer,
when trying to start pdfsam in Debian experimental, that failed
with the following error message:
~~~
$ pdfsam
SLF4J: Failed to load class "org.slf4j.impl.StaticLoggerBinder".
SLF4J: Defaulting to no-operation (NOP) logger imple
Hi,
Thank you for your quick reply.
On 2017-09-05 19:17, Markus Koschany wrote:
> [...] Unfortunately there is another
> error. If you try to manipulate a PDF file (e.g. using the extract
> feature), nothing will happen but an error message is logged. It is
> related to libhibernate-java. Downgra
Package: pdfsam
Version: 3.3.2-2
Severity: wishlist
Dear Maintainer,
PDFsam provides the possibility to enable or disable
certain "features" in its options.
At the moment, the following functionality is enabled
by default:
* "Show donation window"
* "Check for news at startup"
* "Show premium f
Hi Markus,
thank you you for your quick reply and the clarification.
As I said before, this is OK with me. (We'll then probably deploy an
adapted version of the package within our organisation to comply with
our security policies.)
Regards,
Michael
signature.asc
Description: OpenPGP digital
Hi Máximo,
I tried to reproduce the described issue with current Debian
sid/unstable, but was unable to do so.
What I did:
1) create some PDF file (using LibreOffice) under the path you mentioned
$ ls -l
/home/user00/Documents/Books/FÃsica/Estadisticas/Fundamentals_of_Statistical_And_Therma
Package: okular
Version: 4:16.08.2-1+b1
Severity: wishlist
Dear Maintainer,
Debian currently contains Okular version 16.08.2, which is
still KDE 4/Qt 4 based.
The current upstream version is 17.04.3. Among other changes,
this version has been ported to Frameworks 5.
It would be great if Debian
https://bugs.kde.org/show_bug.cgi?id=358289 seems to be a corresponding
upstream bug.
Hi Antonio,
when you use the mouse instead of the keyboard shortcut to select the
highlighter, you have (at least) two options:
1) When you enable the highlighter using a single mouse click, the
behaviour is as you described.
2) When you enable the highlighter using a double mouse click, the
Hi Antonio,
On 2017-07-25 22:45, Antonio Marcos López Alonso wrote:
> 2) is exactly the behavior I was looking for and I regret I couldn't find it
> out before. My bad.
>
> Thanks a lot for pointing this out for me and also I apologize for the
> unnecessary noise (so you might want to close thi
Hi,
I just experienced the described problem as well.
As far as I understand it, the problem is not specific to gdebi, but is
a more general problem with the 'gksu' command. This problem is also
described in the Debian bug reports #481689 [1], #570700 [2], and
#700162 [3].
The workaround of expl
On Fri, 4 Nov 2016 18:10:52 +0100 aaa bbb wrote:
> All I needed to get wireless WLAN working, was to add this to
> /etc/NetworkManager/NetworkManager.conf
> [device-mac-randomization]
> wifi.scan-rand-mac-address=no
Adding the above directive works for me as well. (I am using
network-manager 1.6
ssage
Subject: Re: hplip-gui: hp-toolbox and hp-setup cannot load
Date: Sat, 3 Dec 2016 22:24:43 +0100
From: Michael Weghorn
To: 846...@bugs.debian.org
Hi Alejandro,
I just installed "hplip-gui" on unstable/sid in a VM and running
hp-setup or hp-check did work for me. (I di
Hi Alejandro,
I just installed "hplip-gui" on unstable/sid in a VM and running
hp-setup or hp-check did work for me. (I did not check the
functionality, just that the problem you described did not occur.)
Do you have the package "libhpmud0" installed?
It contains the respective shared library fil
Hi,
On Thu, 3 Aug 2017 13:33:01 +0200 Alex ARNAUD wrote:
Forwarded: https://bugs.documentfoundation.org/show_bug.cgi?id=101886
DESCRIPTION FROM UPSTREAM:
> The border line style control (svtlo-LineListBox) found in the border tab in
most dialogs isnt accessible with a screen reader and labels
Package: libreoffice
Version: 1:7.4.1~rc1-3+b1
Severity: wishlist
X-Debbugs-Cc: m.wegh...@posteo.de
Dear Maintainer,
a Qt 6 based UI variant (VCL plugin) was added to LibreOffice in this commit:
https://git.libreoffice.org/core/commit/88d57cf241209ffec9eaed3e523942ab51af6db6
It is the Qt 6 varia
does that.
Best regards,
Michael
[1]
https://invent.kde.org/sdk/heaptrack/-/commit/c6c45f3455a652c38aefa402aece5dafa492e8ab
From 29b9975134402c3e50f5b8d7fa4f06670ca67b9d Mon Sep 17 00:00:00 2001
From: Michael Weghorn
Date: Mon, 2 Sep 2024 09:33:51 +0200
Subject: [PATCH] Backport upstream comm
ntly uploaded into unstable
doesn't seem to have been pushed to git yet, but still shows the same
problem without this patch applied.)
Regards,
Michael
From daaff90f9f72992b860c1ff58c5e1304772ccd8d Mon Sep 17 00:00:00 2001
From: Michael Weghorn
Date: Thu, 8 Aug 2024 21:22:06 +0200
Subject:
On 2024-08-08 21:37, Michael Weghorn wrote:> Attached is a suggested
patch that makes Thunderbird use "thunderbird"
as the app ID by passing the `--name=thunderbird` argument when starting
Thunderbird via Debian's wrapper script.
This makes the app icon show up as expected wh
Hi,
On Thu, 8 Aug 2024 23:02:05 +0200 Samuel Thibault
wrote:
I don't know if this is the right way to report my bug, but I discovered that
updating the atspi2 stack to version 2.53.1-1 prevents orca from starting with
a python error :
[...]
MR with a suggested upstream fix:
https://gitlab.g
On 2024-08-09 10:04, Michael Weghorn wrote:
MR with a suggested upstream fix:
https://gitlab.gnome.org/GNOME/at-spi2-core/-/merge_requests/166
FYI: Related merge requests to also make Orca announce the button role
correctly again:
https://gitlab.gnome.org/GNOME/at-spi2-core/-/merge_requests
tags 1078244 + fixed-upstream
thanks
On 2024-08-09 14:09, Michael Weghorn wrote:
On 2024-08-09 10:04, Michael Weghorn wrote:
MR with a suggested upstream fix:
https://gitlab.gnome.org/GNOME/at-spi2-core/-/merge_requests/166
FYI: Related merge requests to also make Orca announce the button
Hi,
On 2018-07-29 10:55, Boyuan Yang wrote:
> [...]
> It seems that kprinter4 has stopped development since 2014 and there's no
> sign
> of porting to Qt5. I'm wondering if you will pick up this software and port
> it
> to Qt5 or if there's already a Qt5 counterpart around. If none of those wi
forwarded 815589 https://bugs.kde.org/show_bug.cgi?id=336617
thanks
Hi,
there is the following upstream bug report that deals with the issue of
the printout in Okular always being scaled down to the printable area:
https://bugs.kde.org/show_bug.cgi?id=336617
Regards,
Michael
On Mon, 22 F
Package: qtcreator
Version: 4.14.0-2
Severity: normal
X-Debbugs-Cc: m.wegh...@posteo.de
Dear Maintainer,
since version 4.14.0-2, Qt Creator's Clang Code Model is unable to find the
'stddef.h' header. It still works OK with version 4.14.0-1.
Sample steps to reproduce:
* create a simple C++ proje
Thanks for the quick reply!
On 08/01/2021 17.28, Pino Toscano wrote:
qtcreator 4.14.0-2 has been available in unstable (which you use) for
more than two weeks, so reading this problem now seems slightly
awkward. Have you used qtcreator 4.14.0-2 (and it code model)
successfully so far in the pa
Package: libvirt-daemon
Version: 4.0.0-1
Severity: important
Dear Maintainer,
when libvirtd is restarted while a VM is running, the system "freezes".
The following steps can be taken in order to reproduce the problem:
* Set up and start a virtual machine using `virt-install`, e.g. as follows:
reassign 888954 linux-image-4.14.0-3-amd64 4.14.13-1
thanks
Hi,
On 2018-01-31 16:12, Guido Günther wrote:
> [...]
> This looks like a kernel bug. Please reassign to the appropriate
> package. I can restart libvirtd without issues with
> linux-image-4.14.0-3-amd64 (although 4.14.12-2).
> Cheers,
>
I did some further testing with older kernel versions from
snapshot.debian.org to identify from when on the problem occurs and
discovered 2 things:
1) The problem does not necessarily occur every single time. For some of
the affected kernel versions, I needed two or three attempts (with
reboots in
tags 888954 + fixed-upstream
thanks
On 2018-01-31 19:31, Michael Weghorn wrote:
> [...]
> In addition, there is a stack trace posted at
> https://lkml.org/lkml/2017/12/17/212 that looks very similar, so the fix
> referred to at https://lkml.org/lkml/2017/12/20/426 might fix the issue
On 2017-10-09 19:49, lp...@centrum.cz wrote:
> I can confirm that this helped resolve the issue. Thank you very much!
> Leos
You're welcome. Thanks for the confirmation that this solved the issue!
@Máximo: Do you still have the issue with Okular not being able to open
PDF files if the path cont
Hi,
this looks very similar to #878895.
How are the two related?
Regards,
Michael
On 2017-10-22 01:16, Mike Gabriel wrote:
> Package: wnpp
> Severity: wishlist
> Owner: Mike Gabriel
>
> * Package name: libqtdbustest
> Version : 0.2+bzr42
> Upstream Author : Pete Woods
> * URL
Hi,
On 2018-01-20 00:40, Iago wrote:
>
> After one of the latest security updates in debian stretch some pdf files
> started to display "transparent" text. I think that this is related to pdf
> with accents.
> Another user (http://forums.debian.net/viewtopic.php?f=6&t=135888) says that
> thi h
reassign 887793 libpoppler64
found 887793 poppler/0.48.0-2+deb9u1
fixed 887793 poppler/0.48.0-2+deb9u2
thanks
Thank you for your quick replies.
I'm closing the bug report then.
Regards,
Michael
On 2018-02-07 16:52, Yago Fernandez wrote:
> It's alright now
>
> El 7 feb. 2
On 2018-02-08 18:25, Marc Haber wrote:
> On Thu, Jan 18, 2018 at 03:26:35PM +0100, Michael Weghorn wrote:
>> Thanks, Marc, for retesting and the quick reply.
>
> You're welcome. I apologize for adding more confusion to this, but I
> cannot reproduce this any more in current
Hi Laurent,
does this happen for every PDF document or just for specific ones? Can
you possibly attach one that is affected?
I just tried quickly with one PDF document and did not see any real
difference between the "old" Okular in testing and the one in unstable.
Regards,
Michael
On Sun, 07
Hi,
the bug is still reproducible in current Debian stable (libpoppler64
0.48.0-2+deb9u1).
However, I can no longer reproduce it in current Debian unstable
(libpoppler72 0.61.1-2), so it seems to have been fixed in the meanwhile.
Regards,
Michael
On 2018-01-09 21:53, Andreas Goesele wrote:
>
Just a note: #886733 seems to describe the same problem for Debian stable.
Regards,
Michael
On 2018-01-09 23:37, Andreas Gösele wrote:
> Package: libpoppler46
> Version: 0.26.5-2+deb8u2
> Severity: important
>
> Dear Maintainer,
>
> after the security update from 0.26.5-2+deb8u1 to 0.26.5-2+d
Just a note: #886733 seems to describe the same problem for Debian stable.
Regards,
Michael
On 2018-01-09 23:37, Andreas Gösele wrote:
> Package: libpoppler46
> Version: 0.26.5-2+deb8u2
> Severity: important
>
> Dear Maintainer,
>
> after the security update from 0.26.5-2+deb8u1 to 0.26.5-2+d
Just a note: #886798 seems to describe the same problem for oldstable.
Regards,
Michael
On 2018-01-09 12:22, Semyon Glazyrin wrote:
> Package: okular
> Version: 4:16.08.2-1+b1
> Severity: normal
>
> Dear Maintainer,
>
> After latest upgrade of popper:
>
> [UPGRADE] libpoppler-glib8:amd64 0.4
reassign 886733 libpoppler64
found 886733 poppler/0.48.0-2+deb9u1
notfound 886733 okular/4:16.08.2-1
thanks
Hi,
getting over the Debian patches added with the latest security update, I
realized that patch "CVE-2017-14519.patch" causes the problem of the
text disappearing (with the PDF document I
Hi Marc and Adi,
On Thu, 27 Apr 2017 19:53:45 +0200 Adi Kriegisch wrote:
> There seem to be several upstream issues dealing with this, eg.
> https://bugs.kde.org/show_bug.cgi?id=348171
>
> Okular in its current version in Stretch (16.08.2-1+b1) cannot be used for
> printing.
The mentioned upstr
Hi,
On Sat, 13 Feb 2016 13:14:56 +0100 Maria
wrote:
> Okular freezes when trying to load a *.chm file.
> Mouse turns into please wait status, menus doesn't react.
> Only possibillity is killing the window.
> [...]
does this problem still occur with the Okular version in current Debian
testing/un
tags 860366 moreinfo
thanks
Hi Rainer,
I just tried to reproduce the crash with the mentioned file. With the
Okular version in current Debian testing/unstable (4:17.08.3-2), I
cannot reproduce the problem, the file opens fine for me.
Does the problem still occur there for you?
Regards,
Michae
Hi Sten,
does the described problem still occur for you?
I just tried to reproduce but did not encounter this problem.
Regards,
Michael
On Mon, 29 Feb 2016 23:10:56 -0500 Sten Heinze wrote:
> [...]
> Trying to open a pdf file from dolphin only leads to an 'open with..' dialog
> where I c
Hi Rainer,
thanks for the quick reply.
Let's close the bug report then as you suggested.
Regards,
Michael
On 2018-01-16 22:23, Rainer Dorsch wrote:
> Hi Michael,
>
> thanks for testing.
>
> It works here now as well on stable. I switched though from i386 to amd64 in
> the meantime. Since i
Thanks, Marc, for retesting and the quick reply.
On 2018-01-17 23:22, Marc Haber wrote:
> https://www.eisenbahn-unfalluntersuchung.de/SharedDocs/Downloads/EUB/Untersuchungsberichte/2015/104_Duisburg-Wedau_-_Lintorf.pdf
> - click on "herunterladen" and use the resulting PDF.
I can't reproduce the
Package: okular
Version: 4:17.08.3-2
Severity: wishlist
Dear Maintainer,
thanks for maintaining Okular for Debian and providing
a Qt 5 based version with version 17.08.3.
In the meanwhile, upstream has released version 17.12.1 and it would be
great if that one could be packaged for Debian.
KDE
On Fri, 25 Aug 2017 17:38:10 +0200 Raschi Diego wrote:
> Package: okular
> Version: 4:16.08.2-1+b1
> Severity: important
>
> Hi,
>
> Okular has the same issue when retrieving printer information like
> previous release (Jessie). Basically, selecting the printer does not
> load the default opti
Hi,
I had a look at this.
The relevant parts from the build log are probably the following:
~~~
[...]
Setting up libqmobipocket-dev (4:16.08.0-1) ...
[...]
CMake Warning at generators/CMakeLists.txt:85 (find_package):
Could not find a configuration file for package "QMobipocket" that is
c
Hi Leoš,
thanks for reporting that you also have this issue.
On 2017-10-04 18:42, Leoš Pohl wrote:
>
> -- debconf information:
> perl: warning: Setting locale failed.
> perl: warning: Please check that your locale settings:
> LANGUAGE = "",
> LC_ALL = (unset),
> LC_TIME = "cs_C
n_US.UTF-8"
> LC_TIME=cs_CZ.UTF-8
> LC_COLLATE="en_US.UTF-8"
> LC_MONETARY="en_US.UTF-8"
> LC_MESSAGES="en_US.UTF-8"
> LC_PAPER="en_US.UTF-8"
> LC_NAME="en_US.UTF-8"
> LC_ADDRESS="en_US.UTF-8"
> LC_TELEPHONE="en_US.UT
On 2018-04-11 19:47, Eike wrote:
> For KDiff3 QT, it would not be hard. For the KDE version, there's no upstream
> KDE 5 version and the upstream author doesn't have time to implement it.
> There are people trying to create a KDE5 version, though. I'd prefer to
> package that when/if it works. Th
#x27;target extended-remote
127.0.0.1:16536' /usr/lib/libreoffice/program/soffice.bin
-- System Information:
Debian Release: bullseye/sid
APT prefers testing-debug
APT policy: (500, 'testing-debug'), (500, 'testing')
Architecture: amd64 (x86_64)
Kernel: Linux 5.4.0-3-a
utils7.7+4
Versions of packages backintime-qt recommends:
ii python3-secretstorage 2.3.1-2
Versions of packages backintime-qt suggests:
ii meld 3.20.0-2
-- no debconf information
>From 4d9751c7d215ebdd56f14239d6edfd0e1db78b19 Mon Sep 17 00:00:00 2001
From: Michael We
Hi,
On 11/06/2019 23.37, Martin Steigerwald wrote:
> Hmmm, so it works okay with okular 19.04.1.
>
> That means somewhere between 17.12 and 19.04.1 is a bug fix for the issue
> you reported. Maybe upstream has an idea which one it might be. At this
> point I believe all that could be done would
> Michael, thank you are lot for your research which made that bug report
> actionable.
>
> Of course there may be another bug in there: When one printer cannot be
> used for some reason, it should not automatically switch to another one.
> But nonetheless the commit you pointed out looks like
Hi,
On 30/01/2019 22.34, Rene Engelhard wrote:
> Upstream says:
>
> 14:44 < _rene_> bubli:
> https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=920859. known? (gtk3_kde5)
> 14:45 <@bubli> _rene_: Neven seen before
> 14:49 -!- NaveenNaidu_ [~NaveenNai@223.186.44.102] has quit [Ping timeout:
> 268
On 28/12/2018 07.25, Asho Yeh wrote:
> Package: pcmanfm
> Version: 1.3.1-1
> Severity: normal
>
> a few keyboard shortcuts for navigating directories in PCManFM (Alt+Home
> to
> return to ~/, Alt+Up to go to parent folder) no longer work.
> [...]
There's also an upstream bug for this that ha
Hi,
On Thu, 30 Dec 2021 11:11:43 +0100 Marc Glisse
wrote:
Package: libgoogle-glog-dev
Version: 0.5.0+really0.4.0-2
Severity: normal
Dear Maintainer,
with the switch to llvm-13 in testing, installing libgoogle-glog-dev has
become problematic, it depends on libunwind-dev, but that conflicts wi
Hello,
On 09/11/2021 03.45, Patrick Häcker wrote:
I tested the Mesa upstream version from https://gitlab.freedesktop.org/mesa/
mesa/-/tree/main and can confirm the broken version there, too.
However: I didn't get any artifacts with mesa-21.3.0-rc4. I didn't bisect that
as mesa-21.2.5 has the
Hello,
On Fri, 17 Sep 2021 14:15:50 +0200 Sylvain Tgz >
This bug couldn't be related between libraries and hardware ?
I found newer application with artifact : VLC, simplescreenrecorder
I'm having this issue on Debian testing as well, after an upgrade of
Mesa packages from 20.3.5-1 to 21
(...) With this in place, I still ran into another problem,
described in upstream issue
https://github.com/frankmorgner/vsmartcard/issues/218
("ModuleNotFoundError: No module named 'sha'").
With a logical backport of the suggested upstream PR
https://github.com/frankmorgner/vsmartcard/pull/228
Hi,
is there any chance to get a fixed package released sometime soon?
The following change fixed this for me in a local rebuild of the
package, but there might be a better way to handle it:
diff --git a/debian/python3-virtualsmartcard.install
b/debian/python3-virtualsmartcard.install
index
Package: plasma-browser-integration
Version: 5.17.5-1
Severity: wishlist
X-Debbugs-Cc: m.wegh...@posteo.de
Dear Maintainer,
currently, the WebExtension for plasma-browser-integration is not packaged in
Debian.
For the Firefox case, it is therefore necessary to install the extension
manually from
rind1:3.15.0-1
-- no debconf information
From 2c75d9fd06b44e8e381a39af2e81fc38f4e01c37 Mon Sep 17 00:00:00 2001
From: Michael Weghorn
Date: Tue, 31 Mar 2020 17:06:28 +0200
Subject: [PATCH] Drop unused botan build dependency
Botan has been removed upstream with
commit d7178b88c4b2572fb83b28f8178940766216deed
Author: C
tags 917522 + fixed-upstream
thanks
On 23/02/2020 10.24, Kurt Meyer wrote:
> When will this get fixed or is it even fixable? It's been over a year.
The bug has already been fixed upstream. s. previous comments, but the
Debian package does not yet contain the fix.
signature.asc
Description: Ope
88 matches
Mail list logo
