Hi Goswin,
just tested with 20101117, works fine now. Thanks!
Daniel
--
To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org
Package: gitweb
Version: 1:1.7.2.3-2
Severity: normal
Hi,
I just noticed that integrating gitweb via reverse proxy is impossible when
path_info is enabled in gitweb.conf. The base href sent on gitweb.cgi:3427
contains the "internal" URL called by the reverse proxy mechanism, not the
original o
> I'm hijacking this bug to request a better manual page. :)
> Jonathan
Fine with me, thx. Cya upstream...
--
To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org
Hi there,
I managed to track down what's going wrong with compiling
jitsi/2.4.4.997-1 on wheezy, although I didn't solve it in the sense
that it is now compilable on plain Wheezy but on a Wheezy-based system,
pulling in some build-depends from Jessie. Here are my steps:
1) minimal Wheezy installa
Hi,
the attached patch fixes the issue for me, with -j/--jobs taking
precedence over an exported envvar CONCURRENCY_LEVEL.
Cheers
Daniel
--- /usr/bin/make-kpkg.orig 2012-08-15 17:57:29.0 +0200
+++ /usr/bin/make-kpkg 2013-11-01 22:12:25.421575757 +0100
@@ -714,10 +714,6 @@
"of" .
Hi,
somehow I messed up the PATH on my system and I was testing the wrong
script all along.
The patch from my previous mail does NOT work. Sry for the confusion.
Daniel
--
To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact list
I just found out this only happens if /bin/sh points to dash. No
problems at all with bash.
--
To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
Hi Moritz
> > Please test/report, whether the packages located at
> > http://people.debian.org/~jmm/ fix the problem for you.
Could you please publish the source package as well?
And is this going to go into squeeze-updates eventually?
Cheers
Danie
Package: debian-cd
Severity: normal
Hi *
using [1] I end up downloading stuff from [2] which ATM obviously should be
[3]. Moreover, I suggest the creation of an additional "stable" symlink.
Thanks
Daniel
[1] http://cdimage.debian.org/cdimage/unofficial/non-free/firmware/testing/
[2] http://c
Package: git-el
Version: 1:1.7.10.4-1+wheezy1
Severity: normal
Hi,
I just tried to do a simple "aptitude install git-all" with no git or emacs
packages installed (no unpurged config data present as well) but it failed
during postinst of git-el. Below is the console output. Please let me know if
y
Just now I noticed the also alternating change of the server signature
(apache 2.2.x vs 2.4.x) - maybe a remnant process from before the upgrade?
--
To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org
Hi,
I just could reproduce the described behaviour like this:
when having a sources.list like this
**
deb http://ftp.de.debian.org/debian experimental main contrib non-free
deb http://ftp.de.debian.org/debian stable main contrib non-free
deb http://ftp.de.debian.org/d
Package: live-build
Version: 2.0.12-2
Severity: normal
Tags: squeeze
Hi live team,
I'm building quite large live systems which I employ in daily production use,
so they are BIG (around 4GB). Recently I added the package dwww, which causes
the build to fail occasionally. I was able to track down t
> Daniel: to cercumvent that in live-build, you can add a local preseed file.
gr8 ptr, thx so much! ...and for the quick reply!
cu
D
--
To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org
Hi everybody,
> 1. Linux, by its design, is a multi-task system, and there's nothing in
> the Policy that disallows spawning background tasks from maintainer
> scripts, so I don't understand why this bug was marked serious.
Actually, I have to agree on that one. (Although I'm glad it got this
mu
Package: libnss-ldap
Version: 264-2.5
Severity: normal
Hi,
libnss-ldap fails to install in a chroot (like with e.g. live-build)
Excerpt from the live-bild logfile:
-8<--
Setting up libnss-ldap:amd64 (264-2.5) ...^M
invoke-rc.d: unknown initscript, /etc/init.d/nscd not found.^M
dpkg: erro
Package: smbldap-tools
Version: 0.9.5-1
Severity: important
Tags: patch squeeze sid
Hi,
I'm using slapd via ldaps://. smbldap-tools work fine as far as operation from
an account with access to smbldap_bind.conf is concerned. However users can't
change their own passwords since the bind operation
Package: live-config
Version: 2.0.15-1
Severity: important
Tags: squeeze sid
Hi Live-Team,
I spotted another incompatibility between a .deb and how the Live system is
handling its behaviour (similar to live vs. dwww).
Usually I boot my live-systems so that LIVE_TIMEZONE="Europe/Berlin" gets set
Package: devscripts
Version: 2.10.69+squeeze2
Severity: normal
Hi *,
when lintian exits with a non-zero code, that fact is totally ignored by
debuild which essentially renders debuild useless for automated building and
testing with lintian.
I suggest one of these modifications:
* at least pass
Package: xfwm4
Version: 4.10.1-3
Severity: normal
Hi,
running xfwm4 and vncviewer, since the Jessie release I'm no longer able to do
multi-selections using CTRL+click or SHIFT+click in an application within the
vncviewer window.
Expected behaviour: multiple items selected (contiguous in case of
Package: unison-gtk
Version: 2.40.102-2
Severity: normal
Tags: patch
Hi,
shortcut keys defined in profiles for the GTK UI ceased working since 2.40
(Jessie). Until 2.32.x it was working fine.
Finally I found some time to dig into this and found, that now the profiles are
scanned only after the m
correct link to git commit:
http://git.xfce.org/xfce/xfwm4/commit/?id=d30cd2fb8a2303ed93dd4d0e5d73bfb337541f59
Package: roundcube
Version: 1.1.2+dfsg.1-1
Severity: important
Hi,
during the upgrade, the package tinymce got removed, complaining about the
directory /usr/share/tinymce/[...] not being empty.
Turns out, when roundcube-core got extracted, there still was the symplink
/usr/share/roundcube/progra
PS: "dpkg --force-depends --remove roundcube-core; apt-get install
roundcube-core"
resolved the situation for me.
Package: makeself
Version: 2.2.0-1
Severity: wishlist
Please update the package to the latest upstream git version.
It contains several bug fixes and enhancements. [1], [2]
Most notably:
- fixed handling of spaces for startup_script and parameters [3], [4]
- encrypting the archive with gpg or o
Source: unison
Version: 2.48.3-1
Severity: wishlist
Please update the packaging to the latest upstream version at [1].
Changelog: [2]
Thanks!
Daniel
[1] https://github.com/bcpierce00/unison
[2]
https://www.cis.upenn.edu/~bcpierce/unison/download/releases/stable/unison-manual.html#news
Package: cgit
Version: 1.0+git2.8.3-3~bpo8+1
Followup-For: Bug #784621
Hi,
I just stumbled over this issue as well. The attached patch fixes this.
Cheers
Daniel
-- System Information:
Debian Release: 8.6
APT prefers stable-updates
APT policy: (990, 'stable-updates'), (990, 'proposed-upda
Hi folks,
here are some more insights into this mystery:
My "victim" box:
- kvm-guest: jessie, task-xfce-desktop, sysvinit instead of systemd
- running with -net nic,model=rtl8139 -net tap
- connected to br0 of the kvm host which also contains the host's eth0
- the guest's /etc/network/interface
PS: a very crude workaround for this:
# cat /etc/default/NetworkManager
if [ -z "$(ip -4 addr list dev eth0)" ] && [ -n "$(ip -6 addr list dev
eth0)" ]
then
ip link set down dev eth0
ip addr flush dev eth0
fi
signature.asc
Description: OpenPGP digital signature
Package: ifupdown
Version: 0.8.11
Severity: normal
Tags: ipv6
Hi,
I'm trying to configure a tap-device using a inet6 static stanza, but it ends
up unusable:
/etc/network/interfaces:
---8<-
iface tap1 inet6 static
dad-attempts0
privext 2
Package: base-files
Version: 9.2
Severity: normal
Tags: patch
In testing /usr/bin/mesg is provided by util-linux instead of sysvinit-utils.
Its changed behaviour with respect to exit codes needs to be accounted for in
/usr/share/base-files/dot.profile.
When displaying of messages is set to no and
Package: php5-common
Version: 5.6.22+dfsg-0+deb8u1
Severity: normal
Hi,
since the most recent security upgrade, I keep receiving cronjob mails saying
8<-
find: `/proc/14918/fd': No such file or directory
8<-
The count of these entries variies of course, and wheth
> could you please apply this patch:
Thanks Ondrej. I'd already tried s.th. similar in the meantime, and, as
you presumed as well, this already ran into another race, causing mail
clutter.
So, how about a different approach and simply filter those messages:
I'd deem just appending "2>/dev/null"
(forwarding this to the bug list for referece)
On 06/15/2016 04:23 PM, Ondřej Surý wrote:
> Hi Daniel,
>
> could you please apply this patch:
>
> $ git diff
> diff --git a/debian/sessionclean b/debian/sessionclean
> index 237b033..816528a 100644
> --- a/debian/sessionclean
> +++ b/debian/session
Hi,
I saw this got fixed (only?) in 5.6.22+dfsg-2.
When will this fix hit jessie/security?
Thanks
Daniel
signature.asc
Description: OpenPGP digital signature
> this is already fixed in git
Not quite, see [1]
Cheers
Daniel
[1]
http://live.debian.net/gitweb/?p=live-build.git;a=commitdiff;h=2a400dc63ec7305c80dd072984a14839aed74501
--
To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact
Package: debootstrap
Version: 1.0.48+deb7u1
Severity: critical
Justification: breaks unrelated software
Hi,
after running debootstrap the host's /run/shm tmpfs mount gets unmounted. Since
the mount point /run/shm itself is set to root:root/750, this breaks any other
package which relies on being
Hi Bastian,
is there anything I can do in the meantime to mitigate this, apart from
running `service mountdevsubfs.sh start` manually after e.g.
xen-create-image (which invokes deboostrap)?
Daniel
--
To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org
with a subject of "unsubscr
> Also, Daniel, did you try to bootstrap wheezy or sid? And are you running
> systemd?
Like I saide: of wheezy/jessie only wheezy is affected. The commands I
ran are
# debootstrap wheezy /tmp/wheezy http://ftp.de.debian.org/debian
and
# debootstrap jessie /tmp/jessie http://ftp.de.debian.org/d
> And are you running systemd?
Oh I forgot to mention: the host used to build the chroots is plain
wheezy, not running systemd:
# dpkg -l | grep systemd
ii libsystemd-login0:amd64 44-11+deb7u4 amd64 systemd login utility library
# aptitude why libsystemd-login0
i rhythmbox Depends dbus
i A dbu
Hi *,
> How about now? :)
thanks for your patience :)
I can confirm Didier's steps to "work" under jessie and sid, however it
takes ages for lpstat, lpadmin, cupsenable et al to timeout (the overal
postinst run took several minutes). I didn't dig very deep into this
this time, but at least the
Package: exim4-config
Version: 4.80-7+deb7u1
Severity: grave
Tags: security
Justification: user security hole
Hi folks,
suppose you have set up an exim4 which provides virtual mailing, managing
domains/accounts in a DB, say mysql.
Just adding mysql queries and DB-*authentication data* to the ex
Hi,
Commit a1d5ddea5b fixed this.
http://anonscm.debian.org/cgit/d-i/debootstrap.git/commit/?id=a1d5ddea5b7db00548173cee8236aaad61cf5961
cu
Daniel
--
To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.
The patch suggested by me has been accepted upstream. [1], [2]
Maybe this could be included in the next point release...
Thanks
Daniel
[1]
https://webdav.seas.upenn.edu/viewvc/unison/trunk/src/uigtk2.ml?r1=551&r2=550&pathrev=551
[2]
https://webdav.seas.upenn.edu/viewvc/unison/trunk/src/uigtk2
Package: lightdm
Version: 1.10.3-3
Severity: important
Hi,
this system is Jessie with lightdm, sysvinit-core and systemd-shim installed,
running sysvinit-core's /sbin/init.
After booting, lightdm works fine. After doing a `/etc/init.d/lightdm restart`,
whenever I log on with the username user,
> Can you try to restart lightdm using: service lightdm restart and report back?
Same faulty behaviour, since `service lightdm restart` only acts as a
wrapper for `/etc/init.d/lightdm restart`, see attached console.log.
Daniel
# service lightdm stop; sleep 10; bash -x service lightdm start
Stop
> Yes it's a wrapper, but it's a needed one, it'll especially filter stuff in
> the environment. It would help to show the logind session before and after
> restart. I seem to remember that when you restart like that, the lightdm
> process will inherit the console session or something like that, an
On 12/07/2015 01:30 PM, Yves-Alexis Perez wrote:
> On sam., 2015-12-05 at 17:59 +0100, Daniel Reichelt wrote:
>> Up until now I thought, lightdm failed to correctly register a
>> user-session, when really it failed to register one at all...
>
> It might very well be beca
> I cannot confirm this: CUPS 1.7 is installable and working inside a
> chroot, as long as the 631 port is available. Is this a bug with CUPS
> 1.4 only? Has it been reproduced with later versions ?
Thanks, Didier.
Which steps exactly did you take in trying to reproduce this?
Thanks
Daniel
-
Hi guys,
Thanks Didier. I'll try to work in this on the weekend (not sure
though). One more question: which debian version were you running on the
chroot host while you were trying to reproduce this?
Cheers,
Daniel
--
To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org
with a su
> Have you had time to reproduce this by following Didier's steps?
Not so far. For personal reasons I'll be busy for at least the next 2 to
3 weeks :/
Daniel
--
To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmas...@lists
> I seem to be unable to reproduce it with 1.0.60~bpo70+1 but I can with
> 1.0.48+deb7u1; I didn't spot anything obvious from a very quick look,
> but I'll try to track this down a bit later (probably after the release
> sprint).
This bug actually is a duplicate of #702861 which was fixed in 1.0.5
Package: php5-common
Version: 5.4.35-0+deb7u1
Severity: serious
Justification: fails to build from source (but built successfully in the past)
Hi,
on a wheezy system I just updated php5-common (and other stuff) via
security.d.o and since then php5-common's cron script fails. Invoked from the
shel
Sorry for the misleading justification - must have misused reportbug...
--
To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org
Package: borgbackup
Version: 0.30.0-1~bpo8+1
Hi *,
trying to build git tag 0.30.0-2 on Jessie, I just ran into these issues:
- Option -k is only present in pytest of dh-python/stretch, so the build
failed. Either the build-dep on it needs to be versioned (and dh-python needs
to be backported
On 02/08/2016 09:17 PM, Gianfranco Costamagna wrote:
> Hi, because I do no-change backports, and I want the version in unstable to
> be "backportable" easily.
>
> cheers,
>
> Gianfranco
Shouldn't the focus in unstable lie on currentness instead of on
backportability?
AFAICS that's the whole p
I previously replied only to Gianfranco instead of to the bug address.
Here's the missing message I sent only to Gianfranco instead of to the
bug address, which lead up to message #15 above:
---8<-
On 02/08/2016 07:47 PM, Gianfranco Costamagna wrote:
> Actually the reason for
Thanks, Danny.
Hauler if you require manpower to test the packaging.
Thomas Waldmann gave his ok to use the upstream ML for coordination "if
they behave" ;-))
I think in the long run, borg-dev and borg-users lists on l.d.o would be
helpful.
Cheers
Daniel
version: 1.0.0~rc1-2
thanks
Hi Danny,
On 02/19/2016 09:42 AM, Danny Edel wrote:
> 1.0.0~rc1 is in Debian unstable now, with the testsuite deactivated for
> now.
BFS on jessie32/64 worked fine here, thx!
> Regarding coordination, I'm happy enough with the debian bugtracking
> service and t
Hi everyone,
On 02/22/2016 03:45 PM, Danny Edel wrote:
> I have prepared a patch, and verified it against a jessie-backports
> cowbuilder, but I'm not merging it into master without checking in
> with you this time : )
Interesting. On a current jessie (plain + git/master-testsuite-enabled's
buil
On 02/23/2016 08:15 PM, Danny Edel wrote:
> Can you reproduce the build failure in a freshly created pbuilder?
>
>
>
> I created mine with:
>
> DIST=jessie-backports git-pbuilder create
>
> and I checked my build with:
>
> git add -u && \
> gbp buildpackage --git-pbuilder --git-dist=jessie-b
Note to self and other affected users: this is a *nasty*, yet feasible
workaround until this is fixed:
8< /etc/inittab ---
rldm:a:once:/etc/init.d/lightdm restart
8<
Run `init q` to have it re-examine the inittab and from now on
Hi Don,
> However, when I go to https://github.com/debian-live/live-images.git I cannot
> find a branch that contains the old rescue build configuration.
said repository is quite correct, however the files got removed from the
tree by [1].
> Is this configuration laying around somewhere I can
Martin-Eric,
thanks for bumping this. I'll try to get on this between the holidays.
Daniel
On 12/20/2014 11:56 PM, Martin-Éric Racine wrote:
> 2014-10-27 18:16 GMT+02:00 Daniel Reichelt :
>>> Have you had time to reproduce this by following Didier's steps?
>>
> If you want your comments on a bug to be sent to the maintainer and
> recorded in the bug's web-visible record, please send your message to the
> bug address (in this case 684691@) and not just the special control@
> address. In particular, when reopening a bug please send the justification
> for
Package: live-boot
Version: 1:20170112
Severity: minor
Tags: patch
Hi,
live-boot's initramfs-hook contains these lines ([1], [2]), which put
live-boot's /lib/live/boot/ twice into the initramfs image: the latter one at
/lib/live/boot/ and the former one - wrongly - also at /bin/boot/).
The dupl
Package: live-build
Version: 1:20170213
Severity: minor
Tags: patch
Hi,
the attached patch streamlines the missing keyboard shortcut "A" for the
"Advanced options" entry in the syslinux-based boot menu configs.
Thanks
Daniel
diff --git a/share/bootloaders/extlinux/menu.cfg b/share/bootloaders
Package: radvd
Version: 1:2.15-2
Severity: normal
Hi Geert,
radvd shows some strange behavior when it's started over ssh: even in
daemon-mode, ssh would block indefinitely when you execute something
that would be executed by the init script as well:
ssh router "radvd -u radvd -p /var/run/radvd/r
> ssh returns immediately as expected when I run one of these:
Of course, when I tested the redirection to /dev/null happened on the
router, I forgot to type the quotes:
ssh router "radvd -u radvd -p /var/run/radvd/radvd.pid >/dev/null"
ssh router "radvd -u radvd -p /var/run/radvd/radvd.pid -d3"
On 08/30/2017 12:18 AM, Ben Hutchings wrote:
> I can't reproduce this. What driver is used for eth0 (ethtool -i shows
> this)?
Ben,
you're on to something:
# ethtool -i eth0
driver: vif
version:
firmware-version:
expansion-rom-version:
bus-info: vif-0
supports-statistics: yes
supports-test: no
/commit/5cfc48b9ed75eb5f5e127b0d24a18b728b20e9af
From 47e162d9c75253abef86e25a41808ab5230a3168 Mon Sep 17 00:00:00 2001
From: Daniel Reichelt
Date: Sun, 2 Jul 2017 12:21:18 +0200
Subject: [PATCH] add patch to always close STD* FDs on daemonizing
fixes #865795
> But I will spent my time on packaging 2.17-rc1 or 2.17
All the better, thanks.
Does that mean you're going to upload 2.17 to stretch as well?
signature.asc
Description: OpenPGP digital signature
I'm suffering the very same problem than the OP with my employer's WiFi
network.
> If I downgrade libssl1.0.2 to 1.0.2j-1 then I can connect to the
> WPA-EAP network without problem.
Good catch downgrading openssl! I can confirm the WiFi connection to
work up to libssl1.0.2-4 [1], so I guess the
on and replacement of the mount command is both
no longer necessary, and has become harmful. The attached patch against
live-boot's current tag 1%20170623 removes it.
Cheers
Daniel
>From 3891e35f1df321e44e51347df95938346c108ef4 Mon Sep 17 00:00:00 2001
From: Daniel Reichelt
Date: Sun, 1
Package: virtualbox
Version: 5.1.26-dfsg-2
Severity: normal
Dear Maintainer,
when creating VMs, each with a NatNetwork NIC, the VMs can happily talk
to each other but network access beyond the virtualbox host is not
possible. Conventional NAT mode is not affected and works perfeclty
fine.
Fix
Package: staticsite
Version: 0.4-1
Severity: normal
Hi Enrico,
on my system, ssite failed complaining it couldn't find pytz.
apt-get install python3-tz fixed it.
Cheers
Daniel
-- System Information:
Debian Release: 8.7
APT prefers stable-updates
APT policy: (990, 'stable-updates'), (990,
> Incidentally, if anyone *has* a link to the old deb package
> for 1:20151215 so I could verify this, that'd help.
Jason,
have a look at http://snapshot.debian.org/
Cheers
Daniel
signature.asc
Description: OpenPGP digital signature
Package: ethtool
Version: 1:4.8-1
Severity: normal
Hi,
in network/interfaces I have set the option "offload_tx off" for eth0. This
causes `ifdown eth0 ; ifup eth0` to fail when offloading already
was set to off.
The culprit is ethtool, which inconsistently exits 0 or 1 when offloading is
enabled
found 851825 ethtool/1:3.16-1
found 851825 ethtool/1:3.16-1
jessie is also affected
signature.asc
Description: OpenPGP digital signature
> 8<-
> pre-up ethtool --offload $IFACE tx off
> >8-
Copy/paste error. The workaround should have read:
8<-
pre-up ethtool --offload $IFACE tx on
>8-
signa
Package: xen-tools
Version: 4.5-1
Severity: normal
Tags: patch
Hi Axel,
when --nopygrub is passed to xen-create-image, the hooks called during
installation act as if --pygrub were passed.
This setting gets exported to the hooks' environments as pygrub=0|1. The hooks
however do a check like
`if
Package: grub-common
Version: 2.02~beta3-1
Severity: important
Tags: patch
Hi,
in Stretch setting GRUB_DISABLE_LINUX_UUID=true in /etc/default/grub is
no longer respected during creation of linux menu entries.
The culprits are the checks in 10_linux:66-68 and 20_linux_xen:54:56
(identical in bot
Package: libmotif-common
Version: 2.3.4-10
Severity: normal
Hi,
on a freshly installed sid (just now) I noticed the package ddd is not
installable due to a dependency error:
ddd --> libxm4 (which currently resolves to version 2.3.4-11 in sid)
libxm4 --> libmotif-common (resolving to 2.3.4-*10*)
Hi Ronny,
just a minor thing but I think you should anchor your grep to the end of
the filename:
grep -v "old-dkms$"
Cheers
Daniel
On 09/17/2016 02:13 PM, Ronny Standtke wrote:
> Package: live-tools
> Version: 1:20151214+nmu1
> Severity: important
> Tags: patch
>
> On my Debian Live syste
Hi Roland,
> On 20/04/2024 13:32, Daniel Reichelt wrote:
> What are you doing that makes the directory 'config/includes.binary'
> disappear?
> If I use 'lb config --distribution sid', the directory is created (but
> empty) and there will be no error messag
On 02.05.24 17:30, Roland Clobus wrote:
I'll prepare a proper fix that detects whether the directory is present.
Perfect, thanks!
Package: live-build
Version: git-master
Severity: normal
Hi all,
I recently built a .deb of the current master and noticed build failures like
this:
---8<--
P: Begin copying binary includes...
/usr/lib/live/build/binary_includes: 36: cd: can't cd to config/includes.binary
E: An unex
*bump*
On Mon, 20 May 2019 16:31:05 +0200 =?UTF-8?Q?St=c3=a9phane_Glondu?=
wrote:
> Le 20/05/2019 à 16:06, Christoph Groth a écrit :
> > Unison 2.51.2 that has been released in January 2018 has a new feature
> > that is very useful for synchronizing, for example, '.git' directories:
> >
> >>
Package: hostapd
Version: 2:2.9.0-21
Severity: normal
Hi *,
the init scripts used to depend on the presence of /etc/hostapd/hostapd.conf.
systemd however tries to continuously start the units unconditionally.
This additional line in the units would be a simple fix:
[Unit]
ConditionFileNotEmpty
HTTPS envvar and act accordingly.
HTH,
Daniel Reichelt
-- debconf information excluded
--- /usr/lib/cgi-bin/dwww-org 2007-04-01 20:58:22.0 +0200
+++ /usr/lib/cgi-bin/dwww 2007-12-15 00:32:54.0 +0100
@@ -76,9 +76,11 @@
elsif (($type eq "") or ($l
Hi,
since 2.2.11-01-1+b1 apache fails to read .htaccess files which aren't
world-readable. For the sake of testing I reverted my vhost setup to
"AssignUserId www-data www-data" and tried it with a .htaccess file in the
DocumentRoot owned by www-data:www-data set to 640. An attempt to retrieve
http
triggered by the
mount targets of the iso-images. As you can see in the patch attached,
for the conditional awk output to work as desired, another pair of hyphen
enclosing the awk match calls is required.
HTH,
Daniel Reichelt
*** tmp/update-initramfs.patch
--- update-initramfs2007-11-28 19:42
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
+1, thank you!
Cheers,
Daniel
-BEGIN PGP SIGNATURE-
Version: GnuPG v1.4.9 (MingW32)
Comment: Using GnuPG with Mozilla - http://enigmail.mozdev.org/
iQIcBAEBAgAGBQJMfCf1AAoJEIWTgWPaKFdzMDsP/jgIDEKGJkx/78Fz6oCP6gwD
qVkfpjSgCR1XyV8z0l4seaZynnwaP
Package: dpkg-www
Version: 2.54+nmu1
Severity: normal
Hi *,
I just stumbled over an inconsitency in handling casing. When I accidentally
searched for "mC" instead of "mc", I was presented with this search result:
-8<--
Package: mC
Status: install ok installed
Priority: optional
Secti
Package: w3c-markup-validator
Version: 0.7.4-5.2
Severity: normal
Hi all,
suppose someone has an apache2 config block like
order allow,deny
deny from all
Now the symlinked config of this package doesn't override that. Could you
please add something like
Order allow,deny
allow
Package: manpages-dev
Version: 3.25-1
Severity: normal
Hi,
a)
when assigning
int i = pclose(pipeFD);
OR assigning
long i = pclose(pipeFD);
I get a compiler warning like this:
warning: assignment makes integer from pointer without a cast
b)
when assigning
int i = (int) pclose(pipeFD);
I get a co
Package: munin-node
Version: 1.4.3-2
Severity: normal
Tags: patch
Hi,
in /usr/share/munin/plugins/df_abs there's an error within the sed call: it
fails to
correctly prepend each element of a space-separated list of file systems to be
ignored
in the graphs to be prepended by '-x '. The quantifie
Package: munin-node
Version: 1.4.3-2
Severity: wishlist
Tags: patch
Hi!
I just noticed the new total graph in the df_abs diagrams and find it mostly
usefull but in some cases also irritating. The attached patch makes df_abs
mind a new env var $nototal and disables the total graph when it's set t
Package: munin
Version: 1.4.4-1
Severity: normal
Tags: patch
Hi,
when watchin a multigraph page usign cgi-graphing, my apache2 errorlog gets
clobbed with lines like this:
---snip--
[Sun May 23 17:45:15 2010] [error] [client 10.0.50.112] Use of uninitialized
value $scale in subst
Hi again,
I totally missed the fact that with the previous patch on multigraph-pages
within every device-specific graph *all* devices were drawn.
The attached patch (incorporates the previous one) fixes that:
- first of all, munin-cgi-graph prints the device-specific image url instead of
the co
1 - 100 of 179 matches
Mail list logo
