Package: jabberd2
Version: 2.2.8-2.2+b1
Severity: important
Dear Maintainer,
After the last upgrade of MySQL, when I try to connect to my Jabberd2 server, I
have the following message: jabberd2-c2s: symbol lookup error:
/usr/lib/jabberd2/authreg_mysql.so: undefined symbol: crypt. I'm not sure i
Martin Eberhard Schauer wrote:
>Description: Pharmaceutical drugs prescriptor and interactions checker
Also: synopses don't need an initial capital letter, and no
dictionaries I can find believe in the word "prescriptor" (though I
suppose it might be jargon known only to the kind of specialist
Thanks. I've reviewed the freshclam postinst and don't see how it can cause a
problem like this. Can you sudo dpkg-reconfigure clamav-freshclam and when you
get to the related questions, carefully check and see if there's any
whitespace in the debconf window. If so, please remove it and see i
Package: iceweasel
Version: 3.5.16-16
Severity: important
In attempting to send out 5 separate emails, 3 of which were replies & 2 new
emails, Ice weasel just shut-off. There was only one tab open, the Yahoo tab.
Each one occurred while moving from one of my folders to another. I had to
then res
On Wed, 2012-06-20 at 10:03 +0200, Olivier Sallou wrote:
> I was lookig at one of my packages netlib-java
> (http://packages.qa.debian.org/n/netlib-java.html) and web interface
> shows a "problem" section with content: "The package has not yet
> entered testing even though the 10-day delay is over.
I am working on this. Updated package will be soon.
--
To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org
severity 675567 wishlist
stop
Hello Josh,
On 6/2/12 9:26 AM, Josh Triplett wrote:
> ... If ir-keytable searched
> for relative filenames in both /etc/rc_keymaps and /lib/udev/rc_keymaps,
> then /etc/rc_maps.cfg could use entirely relative filenames by default,
> eliminating the second step.
I st
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
Both timing and boot history might be important here. Instead
of manually starting the resolvconf and networking init scripts
I would suggest to boot a _real_ system.
For verification I have configured a private network with some
fake IP addresses on
"John W. Eaton" writes:
> On 20-Jun-2012, Sébastien Villemot wrote:
>
> | "John W. Eaton" writes:
> |
> | > I'd like to help debug this problem but I need some help.
> |
> | Thanks for volunteering!
> |
> | > I need to be able to install a debug version of Octave (preferably the
> | > current
On Tue, 2012-06-19 at 14:10 +0200, Loïc Minier wrote:
> Sorry for the delay
>
> On Mon, Jun 04, 2012, Ian Campbell wrote:
> > +Machine: Globalscale Technologies Dreamplug
> > +Kernel-Flavors: kirkwood
> > +U-Boot-Kernel-Address: 0x8000
> > +U-Boot-Initrd-Address: 0x0
> > +Boot-Kernel-Path: /bo
Package: svnkit
Version: 1.3.5+dfsg-1
Severity: serious
"""
compile-library:
[javac] /build.xml:47: warning: 'includeantruntime' was not set,
defaulting to build.sysclasspath=last; set to false for repeatable builds
[javac] Compiling 68 source files to /contrib/sequence/bin
[javac]
Package: perl
Version: 5.10.1-17squeeze3
Severity: minor
Tags: patch
The current description of Perl in the Debian perl package doesn't
well represent what Perl is about these days. Improved descriptions
have been bouncing around in the Perl community, may I suggest one
written by Chris Nehren? H
Hello,
I am not sure to understand what is wrong with Harun's patch. It is
already included upstream. Could you tell what is missing in his patch ?
Thanks,
Bertrand
--
To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listma
owner 678281 !
found 678281 ledgersmb/1.3.18-1
tags 678281 + confirmed
thanks
I took a look at the file and what it appears to be is that some
msged/msgstr lines somehow ended up being duplicated to other parts of
the file. The file has been corrected and has been added to the upstream
patch
On 20-Jun-2012, Sébastien Villemot wrote:
| Looks like these valgrind errors are generated by the JVM and not by the
| java package. They are probably not a cause of concern.
|
| I don't know how to generate a difference in the valgrind logs, and I
| don't have one between OpenJDK 6 and 7.
|
| T
On 12-06-20 at 01:55pm, Adam D. Barratt wrote:
> On 17.05.2012 07:33, Cyril Brulebois wrote:
> >Jonas Smedegaard (17/05/2012):
> >>On 12-05-16 at 11:55pm, Tzafrir Cohen wrote:
> >>> What modifications? Alternatively: where can I find the new
> >>package?
> >>
> >>They need to change from current b
Package: fai-server
Version: 4.0.1
Severity: normal
Hi,
I tried to build a FAI CD with a brand new wheezy installation.
Building the CD fails as follows:
root@wheezyFAIseed:/etc/fai# fai-cd -m /srv/debmirror/ fai-cd.iso
NFSROOT /srv/fai/nfsroot/live/filesystem.dir mounted
Using grub2
prep
tags 425790 + fixed 3.1.16
tags 425790 + fixed 10.0.3-3
tags 425790 + fixed 10.0.4-1
thanks
Hi,
On Tue, Jun 05, 2012 at 06:28:00PM +1200, Hugh Davenport wrote:
> Package: icedove
> Version: 10.0.4-1
> Followup-For: Bug #425790
>
> Dear Maintainer,
>
>* What led up to the situation?
> Install
On Wed, Jun 20, 2012 at 09:08:43 -0700, Andrew Pollock wrote:
> I completely understand. I just thought I'd ask the question. So would
> introducing this into unstable have to wait until after the freeze, or after
> the release of wheezy?
>
It would have to be after the release. It could sit in
Package: widelands
Version: 1:17-3
Severity: normal
Dear Maintainer,
I have a saved game. If I reload this saved game, widelands crashes with
segmentation fault after about 30 seconds (But not always).
See gdb output below:
Current directory is /usr/games/
GNU gdb (GDB) 7.4.1-debian
Copyright (C)
Hi there,
I was not about to get his patch working, there were typos
mike
On Wed, Jun 20, 2012 at 6:50 PM, Bertrand Marc wrote:
> Hello,
>
> I am not sure to understand what is wrong with Harun's patch. It is already
> included upstream. Could you tell what is missing in his patch ?
>
> Thanks,
>
On Wed, Jun 20, 2012 at 03:30:21PM +, Daniel Pocock wrote:
> - impact of the bug (e.g. security risk? completely non-functional?)
I don't know; openid-consent.js seems to contain a security warning
triggered in some conditions ("fraudulent webiste"), so possibly that
warning will not come wh
Package: apt-listchanges
Version: 2.85.10
Severity: normal
Tags: patch
X-Debbugs-Cc: package...@packages.debian.org, debc...@packages.debian.org
Hi,
when using packagekit, which seems to be the way gnome is going for
graphical package management nowadays, the apt-listchanges output
doesn't go any
On Wed, Jun 20, 2012 at 12:30:44 +0200, Sébastien Villemot wrote:
> Package: release.debian.org
> Severity: normal
> User: release.debian@packages.debian.org
> Usertags: binnmu
>
> Dear Release Team,
>
> The libiml0 package is in an unusable state in sid:
>
> $ ldd /usr/lib/libiml.so
> [...
On 11.07.2010 21:58, Jörg Sommer wrote:
> reopen 586953
> thanks
>
> Debian Bug Tracking System hat am Mon 05. Jul, 09:06 (+) geschrieben:
>> This is an automatic notification regarding your Bug report
>> which was filed against the grub-ieee1275 package:
>>
>> #586953: quits command line mod
There were calls to strstr where strchr should be used.
This line
- sym_name = strstr (prefix, "_");
+ sym_name = strstr (prefix, "libextractor_")+12;
is needed for the x86_64 cause the _in the arch name.
mike
On Wed, Jun 20, 2012 at 7:44 PM, Mike Dupont
wrote:
> Hi there,
> I was not about
Hi,
On Tue, 19 Jun 2012, Thomas Goirand wrote:
> I'm worried that on the home page, it's written:
> "This package is not maintained"
[...]
> Sure, there's the PEAR QA team, but still, it'd be quite risky. So, if
> you don't mind me asking: for what reason do you need php-mail-mbox? I
> don't mind
Package: keepass2
Version: 2.19+dfsg-1
Followup-For: Bug #678275
thanks, changing the font from "Liberation mono" (default) to "DejaVu Sans"
indeed solved the issue for me. The bug still persists for the default
settings though. But this is an easy workaround, at least.
thanks, Florian
--
To
Package: meshlab
Version: 1.3.0a+dfsg1-3
Severity: normal
Tags: patch
Hello,
meshlab failed to build in Ubuntu:
g++ -Wl,-Bsymbolic-functions -Wl,-z,relro -Wl,-rpath,/usr/lib/meshlab -o
../distrib/meshlab main.o mainwindow_Init.o mainwindow_RunTime.o glarea.o
multiViewer_Container.o plugindialo
mercoledì 20 giugno 2012 Kitterman ha scritto:
> Thanks. I've reviewed the freshclam postinst and don't see how it can
> cause a problem like this. Can you sudo dpkg-reconfigure clamav-freshclam
> and when you get to the related questions, carefully check and see if
> there's any whitespace in th
Package: apt-listchanges
Version: 2.85.10
Followup-For: Bug #672230
Dear Maintainer,
apt-listchanges crashed again today (and somewhat annoyingly, the quite
large upgrade just ran without asking for confirmation):
The following NEW packages will be installed:
libcamel-1.2-33 libebook-1.2-13 li
Package: libreoffice-kde
Version: 1:3.5.4-4
Severity: minor
Dear Maintainer,
libreoffice-kde package contains few .desktop files that makes creating
new LO files from KDE file managers easier (by right-clicking and
choosing apropriate menu item). Unfortunately, these .desktop files
contains outdat
Package: libjbzip2-java
Version: 0.9.1-1
Severity: minor
The Vcs path is svn://svn.debian.org/svn/pkg-java/trunk/libjbib2-java
(package spelled as "libjbib2-java"), but the source is called
libjbzip2-java.
~Niels
--
To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org
with a sub
And I just noticed that even though apt-get claimed to upgrade
libc-ares2, it actually didn't, only after running dist-upgrade again.
--
To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org
Package: smplayer
Version: 0.8.0-1
Severity: important
Dear Maintainer,
I have 1920x1080 screen. When i switch video to fullscreen, picture freezes,
but sound is played. Resizing smplayer window greater then some size causing
the same behaviour. 'Critical' size is constant for each video file,
On Fri, Apr 13, 2012 at 09:23:27AM +0200, Antonio Radici wrote:
> On Fri, Apr 06, 2012 at 06:58:59PM +0200, Antonio Radici wrote:
> > Sorry I missed this message; I'll have an upload ready for tomorrow.
>
> I haven't forgotten this message, I'll have the upload ready for this
> weekend, sorry for
Package: mount
Version: 2.20.1-5
Severity: normal
Dear Maintainer,
I am also experiencing the symptoms of bug 581786. I don't know if the root
cause is the same, but I have more information for you.
Mount hangs and uses 100% CPU. It is in "R" state according to "top" and
refusing to die even
On Mon, Jan 30, 2012 at 11:10:27PM +0100, Moritz Muehlenhoff wrote:
> Package: mplayer
> Version: 2:1.0~rc4.dfsg1+svn34540-1
> Severity: important
> Tags: patch
>
> Please enable hardened build flags through dpkg-buildflags.
>
> Patch attached. The more stringent format string checks
> unveiled a
Package: resolvconf
Version: 1.66
Severity: normal
Dear Maintainer,
I have local proxy dns server that accessible on 127.0.0.1 and it use
/run/resolvconf/resolv.conf
(binded to chrooted directory) for configure itself. I need to notify it in
case resolv.conf is updated,
for which I use scri
Package: guessnet
Version: 0.54-1
Severity: minor
Dear Maintainer,
Manpage of guessnet in section about ifupdown mode have incorect example of
use autofilter option
Writen:
autofilter: true
Instead of:
map autofilter: true
(example in /usr/share/doc/guessnet/examples/interface
On Wed, May 09, 2012 at 09:03:00AM +, Emmanuel Lacour wrote:
> Source: suphp
> Source-Version: 0.7.1-2
>
> We believe that the bug you reported is fixed in the latest version of
> suphp, which is due to be installed in the Debian FTP archive:
>
> libapache2-mod-suphp_0.7.1-2_amd64.deb
> to
Package: pidgin
Version: 2.10.4-1.1
Severity: important
When starting pidgin, it crashes after a couple of seconds with the following
error:
[xcb] Unknown sequence number while processing queue
[xcb] Most likely this is a multi-threaded client and XInitThreads has not been
called
[xcb] Aborting
Source: gmsh
Version: 2.6.0.dfsg-2
Severity: serious
Justification: policy §8.1
gmsh ships a shlibs control file that says 'libgmsh 2 gmsh'. This is in
complete contradiction with all rules for packaging shared libraries.
Cheers,
Julien
signature.asc
Description: Digital signature
package: pleiades
severity: wishlist
tags: patch l10n
Please consider to add this file to translation of debconf.
--
brother
http://sis.bthstuden.se
sv.po
Description: Binary data
Package: libreoffice-evolution
Version: libreoffive-evolution-3.5.4-4
Severity: grave
Justification: renders package unusable
Dear Maintainer,
After upgrading libebook-1.2-13 cannot install libreoffice-evolution because
depends on libebook-1.2-12.
Cheers
-- System Information:
Debian Release:
Package: pleiades
Severity: wishlist
Tags: l10n patch
Please include the attached Danish pleiades translations.
joe@pc:~/over/debian/pleiades$ msgfmt --statistics -c -v -o /dev/null da.po
da.po: 3 oversatte tekster.
bye
Joe
da.po
Description: Binary data
Package: libglib2.0-dev
Version: 2.32.3-1
X-Debbugs-Cc: qt4-...@packages.debian.org
For various reason I have for now postponned upgrading glib on my
wheezy box, and it is still at 2.30.2-6. In this situation, the
"qbuild" program fails to work (it is built and tested by the
./configure script fr
On Wed, 20 Jun 2012, Martin Bagge / brother wrote:
I have updated the translation based on the file provided after review on
d-l-english. Please use this file instead of the former submission.
Sorry for the mess I created by not coordinating enough with the other
translators.
And I forgot t
I have updated the translation based on the file provided after review on
d-l-english. Please use this file instead of the former submission.
Sorry for the mess I created by not coordinating enough with the other
translators.
--
/brother
http://martin.bagge.nu
Bruce Schneier beard has the big
Package: fbset
Version: 2.1-25
Severity: normal
Tags: upstream patch
fbset discards unknown sync bits in the fb_var_screeninfo structure.
This works ok on the majority of hardware, but it does not work if the
particular framebuffer driver uses some driver-specific proprietary bits in the
sync fie
Package: reprepro
Version: 4.2.0-2squeeze1
Severity: minor
When reprepro parses a file that is missing a new line at the end, it will
produce the "Overlong line in !" error message.
This can be misleading and make it tricky to track down the problem (since the
lines may not actually be long at a
Package: radvd
Version: 1:1.6-1.1
I can confirm this behaviour. I have a similar setup with two
interfaces on two different subnets. Assume eth0 (which is not
connected but ifup'ed on boot) should announce subnetE and wlan0
subnetW.
On wlan0, both subnets are announced and accepted by a client.
Package: wpasupplicant
Version: 1.0-2
Severity: normal
I was excited to see in the changelog that 1.0 adds a 'blacklist BSSID'
command, something I've long wanted for congested areas where I am
accepting connections for any open network with any ESSID, but many
are not free and therefore not suita
severity 581786 normal thanks
On Thu, Jul 29, 2010 at 10:49:25PM -0700, halbtaxabo-n...@yahoo.com
wrote:
Sorry, no, because I decided the CDROM drive was faulty and
replaced it. Since then, I've had no problem. I agree that it
sounds like a bug in the CDROM driver, but if it takes a defective
CD
Package: radvd
Version: 1:1.6-1.1
Sorry, typo:
This unfortunately breaks IPv6 connectivity for the client on
_subnetW_ !
Nicolas
--
To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org
Hello!
I am very happy having found this bug report as it is possible that the
NMI watchdog mechanism has given me serious headaches since Debian
kernel 2.6.38 was released! I cannot tell it definitely yet as it is an
intermittent error in my case which may take up to a week to appear
once, a
Quoting Christian PERRIER (bubu...@debian.org):
> Dear Debian maintainer,
>
> On Wednesday, June 06, 2012, I notified you of the beginning of a review
> process
> concerning debconf templates for pleiades.
>
> The debian-l10n-english contributors have now reviewed these templates,
> and the fina
Julien Cristau wrote:
> when using packagekit, which seems to be the way gnome is going for
> graphical package management nowadays, the apt-listchanges output
> doesn't go anywhere, and the gpk window just seems to hang.
> In order to fix that, it'd be nice if apt-listchanges could send its
> outp
Package: debdelta
Version: N/A
Severity: wishlist
Tags: patch l10n
Dear Maintainer,
Please find attached the french translation of program messages of debdelta,
proofread by the debian-l10n-french mailing list contributors.
Best regards,
Thomas
# Translation of debdelta in French.
# Copyright ©
Thanks for the feedback.
On Wed, Jun 20, 2012 at 17:22:41 -0400, Joey Hess wrote:
> Julien Cristau wrote:
> > when using packagekit, which seems to be the way gnome is going for
> > graphical package management nowadays, the apt-listchanges output
> > doesn't go anywhere, and the gpk window just
tag 678313 + pending
thanks
Hi,
On Wed, Jun 20, 2012 at 10:13:40PM +0200, Mirosław Zalewski wrote:
> libreoffice-kde package contains few .desktop files that makes creating
> new LO files from KDE file managers easier (by right-clicking and
> choosing apropriate menu item). Unfortunately, these .
Quoting Martin Bagge (brot...@bsnet.se):
> package: pleiades
> severity: wishlist
> tags: patch l10n
>
> Please consider to add this file to translation of debconf.
The first version had a double space. As this doesn't affect the
translation, here is a fixed version of this translation.
sv.po
Quoting Joe Dalton (joedalt...@yahoo.dk):
> Package: pleiades
> Severity: wishlist
> Tags: l10n patch
>
> Please include the attached Danish pleiades translations.
The first version had a double space. As this doesn't affect the
translation, here is a fixed version of this translation.
da.po
D
Package: getmail4
Version: 4.29.0-1
Severity: important
Dear Maintainer,
after today's upgrade, getmail fails during fetching mails with
Unhandled exception follows:
File "/usr/bin/getmail", line 721, in main
success = go(configs)
File "/usr/bin/getmail", line 336, in go
retrieve
Hi
The first version of the reviewed POT included a double space. Attaching a
updated version of the translation file with this detailed corrected.
Sorry for the double submission.
--
/brother
http://martin.bagge.nu
Bruce Schneier knows Alice and Bob's shared secret.# Translation of pleiades d
tags 665974 patch upstream
thanks
Am Mittwoch, den 20.06.2012, 16:47 +0200 schrieb Fabian Greffrath:
> 1) Could you check if it works with the latest SVN snapshot of libmpc:
> svn co http://svn.musepack.net/libmpc
>
> 2) Could you provide an example sound file somewhere? I do not have
> one myse
On 20/06/12 22:04, Steven Chamberlain wrote:
> On 20/06/12 15:59, Nicholas Bamber wrote:
>> Based upon the feedback I have received (including #debian-hurd) I am
>> attaching a new debdiff.
>
> This debdiff doesn't address the main point of my original mail:
> sockaddr_dl and net/if_dl.h are not (
tag 676340 + pending
thanks
On Wed, Jun 06, 2012 at 12:59:33PM +0200, Rene Engelhard wrote:
> > Could you please package that file?
>
> Probably. But it's quite useless. System requirements, install
> instructions ("dpkg -i *.deb") and some stuff which might be useful:
Anyway, did that a few day
On 20/06/12 15:59, Nicholas Bamber wrote:
> Based upon the feedback I have received (including #debian-hurd) I am
> attaching a new debdiff.
This debdiff doesn't address the main point of my original mail:
sockaddr_dl and net/if_dl.h are not (k)FreeBSD-specific, so a test for
FreeBSD || FreeBSD_ke
Package: dicom3tools
Version: 1.0~20120505-1
Severity: normal
CPPFLAGS are not being appended to CXXFLAGS which make dh/8 + imake fails to
properly pass -D_FORTIFY stuff
-- System Information:
Debian Release: 6.0.5
APT prefers stable-updates
APT policy: (500, 'stable-updates'), (500, 'stabl
Source: gnunet
Version: 0.9.3-1
Severity: grave
Hi,
After the build of gnunet-gtk, I have the following problem on the
buildd:
dpkg: unrecoverable fatal error, aborting:
syntax error: unknown group 'gnunet' in statoverride file
E: Sub-process /usr/bin/dpkg returned an error code (2)
Kurt
On Sat, 16 Jun 2012 18:38:00 +0200 Arne Wichmann wrote:
> This serious bug is now open without any action for more than a year. Is
> that supposed to change?
Hi Arne,
thanks for following up on my bug report.
I am personally trying hard to persuade Open CASCADE S.A.S. to
re-license Open CASCADE
Carlos Alberto Lopez Perez wrote:
> Is the fix for this issue going to be backported to 3.2 via
> sta...@vger.kernel.org ?
Is it fixed in mainline?
--
To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.o
Package: wnpp
Severity: wishlist
Owner: Julien Puydt
* Package name: pynac
Version : 0.2.4
Upstream Author : Burcin Erocal
* URL : http://pynac.sagemath.org
* License : GPL-2+
Programming Lang: C++
Description : engine for symbolic geometric calculus
Hi Hans-Juergen,
Hans-Juergen Mauser wrote:
> I am very happy having found this bug report as it is possible that
Please file a separate bug.
Thanks,
Jonathan
--
To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmas...@l
Package: sslh
Version: 1.13b-2
Severity: serious
Hi,
this packages fails to terminate it's testcode properly (at least on
mipsel) and therefore requires the buildd to timeout the build (and
wastes endless time):
buildd 18416 1 0 21:27 ?00:00:00 sh -c ./echosrv --listen
ip6-local
Hi
I have been investigating that a little and I have found that:
1. There are actually two icons for Writer:
apps/libreoffice-writer.png and mimetypes/libreoffice-oasis-text.png
they are supposed to be the same for each size, but for biggest (256x256)
they are not. Please see the end of message
Package: pleiades
Severity: wishlist
Tags: l10n patch
Version: 1.3.4~I20120531-dfsg-3
.po attached
~~helix84
--
To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org
On 20/06/12 22:09, Nicholas Bamber wrote:
> On 20/06/12 22:04, Steven Chamberlain wrote:
>> This debdiff doesn't address the main point of my original mail:
>> sockaddr_dl and net/if_dl.h are not (k)FreeBSD-specific, so a test for
>> FreeBSD || FreeBSD_kernel would not be appropriate.
You still di
Package: wpasupplicant
Version: 1.0-2
Severity: minor
Justification: documentation,
https://lists.debian.org/debian-user/2012/06/msg01624.html
X-Debbugs-Cc: Frank Miles
Frank Miles wrote:
> The wpa_supplicant.conf man page has many items of interest, but
> lacks _where_ this file is supposed to
Your patch seems to fix the issue.
https://en.wikipedia.org/wiki/External_variable#Definition.2C_declaration_and_the_extern_keyword
# Han
--
To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org
Forgot to include the Language-Team header. Updated .po attached.
sk.po
Description: Binary data
Thank you Miroslaw. I tried your workaround and it worked. This indeed
solved all problems, including the icon when switching between windows.
Regarding point 2, I don't think KDE users should regenerate their icons
cache from time to time. I have been using KDE on Debian for more than 8
years,
Hi,
On Wed, 2012-06-20 at 19:48 +0200, Pino Toscano wrote:
> Alle mercoledì 20 giugno 2012, Adam D. Barratt ha scritto:
> > On 20.06.2012 11:22, Pino Toscano wrote:
> > > Alle giovedì 14 giugno 2012, Adam D. Barratt ha scritto:
> > > Given that kde-workspace is 9/10, would it be possible to let it
On Monday 19 March 2012 22:07:22 Sune Vuorela wrote:
> We have a strong suspicion, among other things due to a almost frozen
> kdelibs upstream and due to the various source package splits that has
> happened as part of the 4.7 transition, that the 4.8 transition will be
> a handful of untangled t
Package: wnpp
Severity: wishlist
Owner: Tadaki SAKAI
* Package name: konoha
Version : 2.0.0
Upstream Author : Kimio Kuramitsu
* URL : https://github.com/konoha-project/konoha
* License : 2-clause BSD license
Programming Lang: C
Description : interprete
Package: spyder
Version: 2.1.10-1
Severity: normal
--- Please enter the report below this line. ---
When an open file is saved, the following message appears in the
internal console. The file is not marked as successfully saved even
though it is saved correctly.
>>> Traceback (most recent call l
Package: gnome-packagekit
Version: 3.4.2-1
Severity: normal
Dear Maintainer,
on my system, running gpk-update-viewer returns the following:
(gpk-update-viewer:20188): PackageKit-WARNING **: couldn't parse execption
'GDBus.Error:org.gtk.GDBus.UnmappedGError.Quark._pk_5ftransaction_5ferror.Code14:
I'm trying to run valgrind on inkscape in Ubunto 12.04LTS but
 valgrind inkscape
blows up with a segfault in libgc. Â (Inkscape without valgrind does not
segfault.)
After finding this debian bug post (and one offline communication from
you)
I tried putting suppression lines in
/usr/lib/val
Package: digikam
Version: 4:2.6.0-1
Hi there,
when I try to adjust the timestamps of a picture and open the
corresponding dialogue, Digikam crashes. Same with the geo localization
dialogue. This behaviour is new and came with some recent updates of
packages other than Digikam. Because when I
On Wed, Jun 20, 2012 at 12:55:43PM +0200, Matthias Klose wrote:
> On 20.06.2012 12:29, James McCoy wrote:
> > On Wed, Jun 20, 2012 at 11:18:48AM +0200, Matthias Klose wrote:
> >>> Bug #678122 [vim-gnome] vim-gnome: python bindings botched?
> >>
> >> are there any compiler warnings with -O2? e.g. ab
Hi!
The attached patch fixes the FTBFS.
The patch adds ruby1.8 to build-depends.
The patch also changes XS-Ruby-Version from 1.8 to the (correct) ruby1.8,
and changes depends from ruby | ruby-interpreter to ruby1.8 (since this is
the ruby version ruby-nora is built for).
Best,
Per
0001-Fix-F
Package: valac
Version: 0.16.0-2
Vala ships with some helpers for autotools which are not being
distributed with the Debian packages due to --disable-unversioned being
passed to configure.
See https://bugzilla.gnome.org/show_bug.cgi?id=668812
--
To UNSUBSCRIBE, email to debian-bugs-dist-re
On Wed, Jun 20, 2012 at 07:26:18AM +0200, Mehdi Dogguy wrote:
> Package: barry
> Version: 0.18.3-2
> Severity: serious
> Tags: wheezy sid
>
> Hi,
>
> barry/0.18.3-2 added a dependency on ppp for barrydesktop.
> Unfortunately, ppp is not available on kfreebsd and this change
> renders the package
Hi Jakub,
Thanks for taking the time to make a report.
Jakub Wilk wrote:
> Source: roundup
> Version: 1.4.18-1.1
> Severity: important
>
> The README says:
>
> The *.txt files in the "doc" directory are written in reStructedText. If
> you have rst2html installed (part of the docutils suite) you c
I am including the crashlog
Application: digiKam (digikam), signal: Segmentation fault
Using host libthread_db library "/lib/x86_64-linux-gnu/libthread_db.so.1".
[Current thread is 1 (Thread 0x7ff90eeeda00 (LWP 16139))]
Thread 13 (Thread 0x7ff8e932e700 (LWP 16141)):
#0 pthread_cond_wait@@GLIBC_2
Package: exim4
Followup-For: Bug #676563
This problem still exists for me in version 4.80-3.
I'm using smtp.srv.cs.cmu.edu as smarthost, and I get this error:
2012-06-20 18:40:40 1ShRfu-0001AA-8c TLS error on connection to
smtp.srv.cs.cmu.edu [128.2.217.15] (gnutls_handshake): The Diffie-Hellman
On 2012-06-20 18:11, Filipus Klutiero wrote:
Thank you Miroslaw. I tried your workaround and it worked. This indeed
solved all problems, including the icon when switching between windows.
Regarding point 2, I don't think KDE users should regenerate their
icons cache from time to time. I have bee
Package: sponsorship-requests
Severity: wishlist
Dear mentors,
I am looking for a sponsor for my package "tilem"
* Package name: tilem
Version : 2.0-1
Upstream Author : Benjamin Moody and Thibault Duponchelle (
tilem-de...@sourceforge.net)
* URL : http://lpg.tical
tags 678221 - moreinfo
thanks
Hi Markus.
Attached is the desired information.
I guess the following happens:
1) unix/socket fails because some parts of the DB are
initialised/upgraded as a non-postgres user, for which the
default-allow-all rule would be in place.
My rules:
local icinga
101 - 200 of 376 matches
Mail list logo
