Package: git-core
Version: 1:1.6.5.2-1
Severity: wishlist
Another patch from my local tree. I hope it is of some use.
-- %< --
Subject: debian/rules: drop misleading PPC_SHA1, ARM_SHA1 settings
These options are ignored nowadays (since v1.6.5) with
NO_OPENSSL, since BLK_SHA1 takes precedence.
Package: git-core
Version: 1:1.6.5.2-1
Severity: wishlist
-- %< --
Subject: debian/rules: allow clean as non-root
There is no need to require (possibly faked) root privileges to
clean up after a build as non-root. Making other targets as root
could cause "debian/rules clean" as non-root to fail,
Package: git-core
Version: 1:1.6.5.2-1
Severity: wishlist
-- %< --
Subject: debian/rules: log $(CC) version, not gcc
It is more useful to include "gcc-4.4 -v" output than "gcc -v"
when building with CC=gcc-4.4.
Signed-off-by: Jonathan Nieder
---
Hi,
Once I ran into some unrelated bug with gcc-
Package: ssl-cert
Version: 1.0.24
Severity: important
When purging ssl-cert, here is what happens:
Purging configuration files for ssl-cert ...
chgrp: cannot access `/etc/ssl/private': No such file or directory
dpkg: error processing ssl-cert (--purge):
subprocess installed post-removal script r
Package: eric
Version: 4.3.1-1
Severity: wishlist
Hi
I'm changing the severity of this bug to wishlist.
Cheers
Gudjon
--
To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org
Package: gnash
Version: 0.8.6-1
Severity: normal
Tags: patch
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
Dear gnash package maintainers,
As debian/changelog,
> gnash (0.8.6-1) unstable; urgency=low
>
> [ Miriam Ruiz ]
> * New Upstream Release
(snip)
> + Rudimentary AVM2 implementati
Package: aptitude
Version: 0.6.0.1-1
Severity: minor
Hi,
# aptitude build-dep git-core
Reading package lists... Done
[...]
Reading extended state information... Done
Initializing package states... Done
Unable to satisfy the build-depends: Build-Depends: libz-dev.
Unable to satisfy the buil
Hi Bas
Can you please test if this bug has been fixed in the current version?
Regards
Gudjon
--
To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org
Source: git-core
Version: 1:1.6.5.2-1
Severity: wishlist
After a few times manually removing .gitignore each time it changes
upstream, I decided to investigate. It is very rare to _start_
tracking a new file with a name ignored by .gitignore, so it should
be pretty safe in the short term to just
Sure. Just take it.
Cheers,
Cajus
Am 08.11.2009 um 01:26 schrieb Barry deFreese :
Cajus,
Are you OK with me orphaning gnarwl and hopefully Fancesco can take
over
maintenance?
Thank you,
Barry deFreese
Debian QA
--
To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.or
On Thu, Nov 05, 2009 at 10:43:29AM +0100, Simon Josefsson wrote:
> Lars Ellenberg writes:
>
> > OpenVPN with LDAP+TLS authentication runs into file exhaustion
> >
> >> Issue is only happening when LDAP is used with TLS support. On every
> >> authentication, a file handle to /dev/urandom is create
Package: amarok
Version: 2.2.0-1
Severity: normal
--- Please enter the report below this line. ---
Hi,
I've migrated from amarok1 to amarok2 and tried to configure it for 6-7
month to make it as convenient as amarok1. But one moment is still
annoying: playlist cannot be sorted by directory.
I
Juan Montoya writes:
> Oh! I didn't expected document.cache.ignore_cache_control to be
> enabled by default.
> Yes, the option works as expected.
> I suggest disabled as the default value to produce a similar behaviour
> with other browsers.
Actually, the behaviour would not become similar. If
Package: gitweb
Version: 1:1.6.5.2-1
Severity: wishlist
upstream/next includes the very neat 'Incremental blame (using
JavaScript)' by Jakub Narebski. Here is a start at packaging it.
Problems:
* Completely untested.
* A large part of what is written in INSTALL is not really relevant
to so
Package: wnpp
Severity: normal
Hello,
as I don't use anymore sqlobject in my projects, I'm going to orphan it in the
next weeks.
Thanks,
Fabio
-- System Information:
Debian Release: 5.0.3
APT prefers stable
APT policy: (500, 'stable')
Architecture: amd64 (x86_64)
--
To UNSUBSCRIBE, emai
Sorry, reassign the severity to wishlist, my mistake.
Regards
Timur
--
To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org
Jonathan Nieder writes:
> diff --git a/git.c b/git.c
> index bd2c5fe..bfa9518 100644
> --- a/git.c
> +++ b/git.c
> @@ -220,6 +220,11 @@ const char git_version_string[] = GIT_VERSION;
> * RUN_SETUP for reading from the configuration file.
> */
> #define NEED_WORK_TREE (1<<2)
> +/*
> + *
tags 555025 + patch pending
thanks
On Sun, Nov 08, 2009 at 11:22:03AM +0900, Charles Plessy wrote:
> first of all, kudos for inventing debcheckout. It is really a tool
> that changes how Debian is.
Thanks, I'm truly flattened.
> I would like to suggest to run the following two system commands in
On Fri, Nov 6, 2009 at 11:39 PM, Robert LeBlanc wrote:
> When setting JETTY_PORT=80, the server dies. There is a setuid option for
> jetty that would allow it to run on port 80. Although an iptable's rule could
> be created, Jetty should include this functionality.
> http://blogs.webtide.com/ja
Package: wnpp
Severity: normal
I'm going to orphan SQLObject because I don't use it anymore in my
projects; the package is already maintained within the
debian-python-modules team.
Thanks,
Fabio
--
To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org
with a subject of "unsubscri
Package: hal
Version: 0.5.13-4
Severity: normal
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
I am remapping Fn+F5 on my Thinkpad to '0x04:bluetooth' to have it toggle
BlueTooth on and off instead of the wlan, which I always need on. The
'ThinkPad Extra Buttons' input device with keymap data loo
Since commit 4af819d (gitweb: Incremental blame (using
JavaScript), 2009-09-01), gitweb includes "git blame" support
that loads asynchronously using the gitweb.js script. Ship it.
Signed-off-by: Jonathan Nieder
---
Of course, commit 4af819d is not even in master yet, so this should
wait until th
Although its main purpose is to document build-time configuration,
the gitweb INSTALL file also documents its configuration format and
some other aspects of run-time setup. Until this is fixed, Debian
should ship the file, even though not all of it may be relevant to
the user.
Signed-off-by: Jona
On Fri, 6 Nov 2009, Rogério Brito wrote:
> Hi, Christian.
>
> First of all, thank you very much for your contribution. I will merge
> them to release a new version of usbmount.
Great. I'm on holidays right now, but I'll get back to you with some
comments when I get back, in two weeks time.
Che
reopen 552010
thanks
After upgrade from 2.9-25 to 2.10.1-5, name resolution breaks if the
'nameserver' option is not present in /etc/resolv.conf:
# ping debian.org
ping: unknown host debian.org
# cat /etc/resolv.conf
options ndots:0
# echo nameserver 127.0.0.1 >> /etc/resolv.conf
# ping -c 1 debi
Hi,
On Sun, Nov 08, 2009 at 09:38:32AM +0100, Gudjon I. Gudjonsson wrote:
> Can you please test if this bug has been fixed in the current version?
It has not. To test this, you can do the following:
create a file named test.asm, with in it:
mov #18, *30
mov #18, 30
Related to official bug report
https://bugzilla.mozilla.org/show_bug.cgi?id=480001
Regards,
Raphael
Source: git-core
Version: 1:1.5.3~rc2-1
Severity: wishlist
This is just a cosmetic change (to shorten the OPTS list).
-- %< --
Subject: debian/rules: drop obsolete WITH_P4IMPORT setting
Since upstream commit f979492 (Remove "WITH_P4IMPORT" knob from
the Makefile, 2007-07-15), this option has no
Hello,
Ubuntu has got tinyproxy 1.6.5.
https://edge.launchpad.net/ubuntu/+source/tinyproxy/1.6.5-0ubuntu1
Regards
--
To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org
Hi Luca,
Luca Capello writes:
> debian/rules uses the `dh --with quilt $...@` command, which requires
> the debhelper quilt.pm module, available only from quilt >=
> 0.46-7.
Thanks, I didn't know that and lintian isn't yet smart enough to
notice (#548094).
> BTW, zeya works correctly on lenny
Package: debconf
Version: 1.5.28
Severity: normal
debconf can not initialize frontends under X, like Gnome or kde. It shows
following error:
debconf: kann Frontend nicht initialisieren: Kde
debconf: (Can't locate Debconf/FrontEnd/Kde.pm in @INC (@INC contains:
/etc/perl /usr/local/lib/perl/5.10.1
forcemerge 509100 555043
thanks
On 2009-11-08 09:58 +0100, Jonathan Nieder wrote:
> aptitude seems to dislike build-dependencies on virtual packages
> without alternatives (libz-dev here). Is this a git-core bug or
> an aptitude bug?
This is definitely an aptitude bug.
> P.S. Any ideas for dea
This should be fixed in version 1.3. For version 1.2, you could apply
the patches
http://sourceforge.net/tracker/?func=detail&aid=2843313&group_id=70849&atid=529223
and
http://sourceforge.net/tracker/?func=detail&aid=2843311&group_id=70849&atid=529223.
--
To UNSUBSCRIBE, email to debian-b
Package: alsa-base
Version: 1.0.21+dfsg-2
Severity: normal
Hello,
I have no sound since I upgraded to Testing. Please could you release a fix.
I noticed that when I remove my usb microphone at start I get back sound, until
I reboot.
Please fix it, it is of no use otherwise using Linux, if you c
Package: openoffice.org
Severity: important
-- System Information:
Debian Release: squeeze/sid
APT prefers unstable
APT policy: (500, 'unstable'), (500, 'testing'), (500, 'stable')
Architecture: x86_64
Kernel: Linux 2.6.30-2-amd64 (SMP w/2 CPU cores)
Locale: lang=de...@euro, lc_ctype=de...@
Quoting Michal Simunek (michal.simu...@gmail.com):
> Package: redhat-cluster
> Version: 3.0.2-5
> Severity: wishlist
> Tags: l10n, patch
>
> In attachment there is initial Czech translation PO debconf template
> (cs.po) for package redhat-cluster, please include it.
Unfuzzied file attached.
c
tags 554677 = confirmed pending
thanks
Hi alon
Thank you for your report. We have already corrected this in our VCS
repository[1] and this will be closed on the next upload to Debian.
~Niels
[1] The "Recommends" -> "Suggest" commit.
http://git.debian.org/?p=pkg-java/eclipse.git;a=commitdiff;
Package: gvfs
Version: 1.4.1-2
Severity: important
Tags: patch
Hello,
gvfs currently FTBFS on hurd-i386 because of unconditional use of
PATH_MAX. The attached patch fixes it by just using glibc's ability to
allocate just what is required. It also actually fixes a bug for the
case when a symlink i
Junio C Hamano wrote:
> Jonathan Nieder writes:
>
>> +/*
>> + * Let RUN_SETUP, USE_PAGER, and NEED_WORK_TREE take effect even if
>> + * passed the -h option.
>> + */
>> +#define H_IS_NOT_HELP (1<<3)
>
> Yuck. Let's think of a way to avoid this ugliness.
Thank you. :)
> So I think the ri
Hi Wolfgang,
It's a bit late, but anyway: you can install the existing i386 package on your
amd64 system.
Download the i386 package from http://packages.debian.org/ (eg
pose_3.5-9.1_i386.deb)
Install it via dpkg -i --force-architecture pose_3.5-9.1_i386.deb
Vincent
--
To UNSUBSCRIBE, email
On Sat, Nov 07, 2009 at 10:26:24PM +, Ben Hutchings wrote:
> 1. EBUSY indicates that the watchdog is opening it more than once, which
> is obviously incorrect behaviour.
To the best of my knowledge watchdog only opens the device once which obviously
makes your conclusion wrong as well.
> 2. F
Quoting Henrik Andreasson (deb...@han.pp.se):
> Package: caudium
> Followup-For: Bug #520384
>
> Hi I've prepared a new version of the caudium package that closes this bug.
> My usual sponsor seems unavailabe at the moment.
> http://mentors.debian.net/debian/pool/main/c/caudium/caudium_1.4.12-13.d
Hi,
> gftk includes in remote file information only numerical user and group
> display using FTP and SSH2 protocols. Version 2.0.17 could display
> user and group names.
I don't think that's a good idea since when browsing a directory a user could
want to not show that it's him who put the file
Package: libvte9
Version: 1:0.22.3-1
Severity: normal
Confirmed seeing garbage sometimes in xfce4-terminal.
For me it started to happen only in recent libvte9 changes, in 0.22.x
series.
-- System Information:
Debian Release: squeeze/sid
APT prefers unstable
APT policy: (990, 'unstable'), (5
severity: important
Hi,
digikam 0.10 was accepted in april, but the -doc-package was never updated.
The current package is unusable, since digikam-0.9.5 is not available in
unstable. So digikam ships without documentation, I guess this violates the
Debian policy.
Regards,
Michael
On Fri, Nov 06, 2009 at 04:00:08PM +, Tim Small wrote:
> Package: linux-image-2.6.26-2-amd64
> Version: 2.6.26-17lenny1
> Severity: normal
>
> Opening /dev/watchdog as provided by ipmi_watchdog on a Dell PowerEdge
> 860 running Lenny 5.0 (64 bit), frequently fails with EBUSY.
Could you please
To quote the developers (www.oolite.org/download):
"Version 1.65, released in June 2006, is the latest full release of Oolite.
However, the test releases are faster, prettier, more stable and use less
memory, so ignoring the full release and using the test releases instead is
recommended. Yes,
Package: redhat-cluster
Version: N/A
Severity: wishlist
Tags: patch l10n
Please find attached the french debconf templates update, proofread by the
debian-l10n-french mailing list contributors.
Thanks for taking care of warning translators before uploading a new
version with string changes. It's
Package: pulseaudio
Version: 0.9.19-2
Severity: normal
My system behaves very similarily, but with pulseaudio 0.9.19-2.
Whenever I skip to the next song in rhythmbox, the volumes for
front,surround,center,lfe get maxed out, but only if the Master-volume
is not 0. This is highly annoying because it
Package: totem-plugins
Version: 2.28.2-3
Severity: wishlist
hi,
as Apelete Seketeli already remarked, python-coherence
brings in 26MB of dependencies,
may you please change the Depends into a Suggests or Recommends?
Note that I did not investigate what effect this would have
on Totem... maybe
Hello,
I've purged digikam and removed my local settings (digikamrc, digikam-folder
unter .kde/share), and reinstalled the package.
Digikam still crashes like before.
Regards,
Michael.
--
To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org
with a subject of "unsubscribe". Tro
Package: seahorse-plugins
Version: 2.28.1-1
Severity: important
File: /usr/bin/seahorse-tool
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
Hi,
When I try to decrypt a gpg file with seahorse tool, I get a SEGFAULT.
I've rebuilt seahorse-plugins with debugging symbols and here is the gdb
session:
severity: important
After editing GPS coordinates via correlator, digikam writes the coordinates
to the files and crashes. Please see the attached stack trace.
Greetings, Michael.
Application: digiKam (digikam), signal: Segmentation fault
[Current thread is 1 (Thread 0x7f1245cbb750 (LWP 6493))]
forcemerge 553131 553133
retitle 553131 eclipse: FTBFS - native libraries are not built from source.
tags 553131 = confirmed
reassign 553131 src:eclipse
thanks
Hi
It turns out (by looking at the build logs) that this is caused by the
3.4.1 build passing a misspelled path to dpkg-shlibdeps. I hav
Package: courier-mta
Version: 0.59.0-3
Severity: serious
--- Please enter the report below this line. ---
When performing
apt-get install courier-mta
on an otherwise clean squeeze system, dpkg fails with an post-install script
error in package courier-mta.
Installing the lenny package and dist-up
On Fri, Nov 06, 2009 at 06:45:20PM +0100, Julien Cristau wrote:
>
> What's the status of this in lenny? I'm afraid there's not much
sorry, I don't have access to that hw anymore so I'm unable to do further
tests.
> should be either reported there or marked wontfix.
not sure, I don't have enou
Package: spidermonkey-bin
Version: 1.9.0.15-0lenny1
Severity: important
Consider this example input in interactive mode:
var text = "some text";
print(text);
will generate an "illegal character" error beginning with line 2.
After that any line you enter generates the same error.
Running an equiv
Hi Vincent,
> There is some improvement in Roundcube 0.3.1 about cache
> management. Could you check that it solves your problem? Please notice
> that upstream disable cache by default from this release, so it could
> fix your problem without really fixing it. Try with cach
* yellow [091108 11:33 +0100]
> Package: alsa-base Version: 1.0.21+dfsg-2 Severity: normal
>
> Hello,
>
i
> I have no sound since I upgraded to Testing. Please could you
> release a fix.
>
> I noticed that when I remove my usb microphone at start I get back
> sound, until I reboot. Please fix i
On Mon, Sep 14, 2009 at 11:54:03PM -0400, Michael S Gilbert wrote:
> hi,
>
> i would be willing to adopt mathwar and amphetamine. i'm not a dd, but
> do have some packaging experience. i would need a mentor to do uploads
> for me.
Great, I suggest you to join the Debian Games Team to maintain t
tags 552480 = confirmed
thanks
Hi
Thanks for testing it - this is a known problem then and we have partly
fixed it in our VCS[1] and it will be fixed by upstream in eclipse 3.6
(and possibly also 3.5.2).
~Niels
[1] Partly fixed as in our VCS version suffers from fewer of these
problems tha
Does this happen only during a KDE session?
If so, this might a symptom of #550042.
The xscreensaver daemon should not run at
the same time as KDE's own screen saver service.
Try this: as root, remove each of the following two
files if it exists:
/etc/X11/Xsession.d/80xscreensaver_start
/etc/xdg/
reopen 550042 =
severity 550042 important
thanks
In the proposed fix for this bug, the Xsession.d item
was replaced by an xdg autostart item. So xscreensaver
still starts automatically for every desktop session.
In a KDE session, this causes a conflict between
xscreensaver and KDE's own screen sa
Package: python-gamera
Version: 3.2.3-1
Severity: minor
gamera.util.CallbackSet objects are meant to be picklable/unpicklable
(__setstate__ method is implemented), but in fact they are not:
from gamera.util import CallbackSet
from pickle import loads, dumps
s = CallbackSet()
loads(dumps(s))
Tr
Debian Bug Tracking System wrote:
Package: pdftk
Version: 1.41+dfsg-1
Hi Helge,
Thanks for your report.
The non-ascii filename problem should be already solved.
Please update to version 1.41+dfsg-1 or higher.
I can confirm that the problem is solved in version 1.41+dfsg-2.
Thanks!
Helge
On Sat, 07 Nov 2009, Mike Hommey wrote:
> We can go even further, with another optimization.
>
> As appeared in the profiles, abs2rel and canonpath take a lot of time.
> It look like abs2rel is bloated for what it is used for.
I applied the patch as well. Thanks!
Cheers,
--
Raphaël Hertzog
-
Please DO take over the package and QUICKLY, the 7 days have passed
already since quite a long time.
I'm trying to maintain YUM in Debian, which also needs python-iniparse,
and it's been a real pain to have to wait for a FULL YEAR to have
absolutely NOTHING coming out. Now, Squeeze is soon in froz
Package: wnpp
Severity: wishlist
Owner: "Marco Túlio Gontijo e Silva"
* Package name: haskell-bytestring-nums
Version : 0.3.1
Upstream Author : Jason Dusek
* URL : http://github.com/jsnx/bytestring-nums
* License : BSD
Programming Lang: Haskell
Description
Package: mc
Version: 2:4.7.0-pre1-3
Severity: normal
mc -e is very cool for edition and coding
but one cannot do much with it, since it is not possibel to copy paste from
another xterm with the middle mouse under X
Could you please fix it, in order to have something stable for the next release
Michael Biebl wrote:
> Bjørn Mork wrote:
>> Package: hal
>> Version: 0.5.13-4
>> Severity: normal
>>
>> I am remapping Fn+F5 on my Thinkpad to '0x04:bluetooth' to have it toggle
>
>> This stopped working after upgrading to hal 0.5.13-4. No matter what I set
>> the
>> keymap to, Fn+F5 will alway
Bjørn Mork wrote:
> Package: hal
> Version: 0.5.13-4
> Severity: normal
>
> I am remapping Fn+F5 on my Thinkpad to '0x04:bluetooth' to have it toggle
> This stopped working after upgrading to hal 0.5.13-4. No matter what I set
> the
> keymap to, Fn+F5 will always generate KEY_WLAN:
Have you r
2009/11/1 Luk Claes :
> Bálint Réczey wrote:
>> 2009/10/30 Luk Claes :
>>> Bálint Réczey wrote:
>>>
It seems, that the automatic migration to testing cannot take place
for wireshark 1.2.2-2 because #547704 [1] is falsely identified a new
bug [2].
Package fails to build on a
Package: specto
Version: 0.2.2-3.1
Severity: normal
Hello
seems like the software has still some little fixing, but I would like to
mention:
this software is really great to be coded, shared under linux, and made
available to everybody.
Unfortunately I cannot help much in sence that I do not k
Package: linux-2.6
Version: 2.6.31-1
Severity: normal
Tags: patch
There is no /etc/kernel-img.con on a fresh debootstrap sid. Installing a
kernel leads to:
|mikejones:/var/lib# dpkg --configure -a
|Setting up linux-image-2.6.31-1-amd64 (2.6.31-1) ...
|Running depmod.
|Running update-initramfs.
|u
Package: tsocks
Version: 1.8beta5-9.1
Severity: important
tsocks only intercepts network connections for 64bit programs on amd64
architecture. When running a 32bit program (in my case the citrix
terminal server connector, which is not available as a 64bit binary)
it fails as LD_PRELOAD only contai
Package: ahven
Severity: wishlist
Version: 1.6-2
I am hereby declaring gnat-4.4 to be stable enough for the next
release of Debian.
Please upgrade this package to gnat-4.4; this requires changing the
name of the -dev package name and going though the new queue. For
details, please see
http://peo
Package: apq
Severity: wishlist
Version: 3.0~b1-3
I am hereby declaring gnat-4.4 to be stable enough for the next
release of Debian.
Please upgrade this package to gnat-4.4; this requires changing the
name of the -dev package name and going though the new queue. For
details, please see
http://pe
Package: libid3tag
Version: 0.15.1b-10
As stated by http://id3lib.sourceforge.net/id3/id3v1.html ID3V1 tags
should be zero-padded while libid3tag use space-padded fields.
Here attached a patch to fix this.
Regards
Sm17H
10_id3v1_zeropadding.dpatch
Description: Binary data
Package: eikazo
Version: 0.5.2-4
Severity: important
eikazo does not start the scan when ADF Duplex (doubled side scanning) or
"ADF Back" is selected as scan source with a Fujitsu ScanSnap s510.
After clicking the scan button the job window just shows the status
"waiting for scan". When leaving t
Package: pcscada
Severity: wishlist
Version: 0.5-4
I am hereby declaring gnat-4.4 to be stable enough for the next
release of Debian.
Please upgrade this package to gnat-4.4; this requires changing the
name of the -dev package name and going though the new queue. For
details, please see
http://p
Package: libalog
Severity: wishlist
Version: 0.1-4
I am hereby declaring gnat-4.4 to be stable enough for the next
release of Debian.
Please upgrade this package to gnat-4.4; this requires changing the
name of the -dev package name and going though the new queue. For
details, please see
http://p
Package: apq-postgresql
Severity: wishlist
Version: 3.0~b1-1
I am hereby declaring gnat-4.4 to be stable enough for the next
release of Debian.
Please upgrade this package to gnat-4.4; this requires changing the
name of the -dev package name and going though the new queue. For
details, please se
Package: firmware-ralink
Version: 0.14+lenny2
I've got an 3Com 3CRPCIN175 installed but when calling iwconfig no
device is listed.
The following dmesg is logged:
[ 14.875549] ACPI: PCI Interrupt :02:0c.0[A] -> GSI 20 (level,
low) -> IRQ 20
[ 14.882920] phy0 -> rt61pci_init_eeprom: Err
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
Thank you for the bug report.
I have forwarded this problem to upstream author.
I will fix it in next upload. :-)
Kind regards
Wen-Yen Chuang (caleb)
-BEGIN PGP SIGNATURE-
Version: GnuPG v1.4.10 (GNU/Linux)
Comment: Using GnuPG with Mozilla
Package: kipi-plugins
Version: 0.7.0-1
Severity: normal
I use digikam with both KDE and Gnone and with Kmail or Icedove. When I want to
send image with digikam with icedove, it fails because cedove isn't registered
as an email program like Kmail and others. I've tried with thunderbird without
s
On Sun, Nov 8, 2009 at 7:59 AM, Yitzchak Gale wrote:
> reopen 550042 =
> severity 550042 important
> thanks
>
> In the proposed fix for this bug, the Xsession.d item
> was replaced by an xdg autostart item. So xscreensaver
> still starts automatically for every desktop session.
>
> In a KDE sessio
Package: eikazo
Version: 0.5.2-4
Severity: important
When using eikazo with the document feeder of the Fujitsu ScanSnap s510
scanner eikazo stops scanning with the message "error: _sane.error, Document
feeder out of documents" when the document feeder runs out of paper (what
most times means that
Package: libc6
Version: 2.10.1-5
Severity: important
When I pull up a terminal screen with Ctrl-Alt-Fx and attempt to login
(root or regular user) I get the following:
"login: segfault at bc43c704 ip b7f4c2da sp bfbeb1dc error 4 in
libc-2.10.1.so[b7ed9000+141000]
and login fails and I am retu
On Sun, 2009-11-08 at 14:02 +0100, yellowprotoss wrote:
> but one cannot do much with it, since it is not possibel to copy paste from
> another xterm with the middle mouse under X
> Could you please fix it, in order to have something stable for the next
> release of debian stable.
The clipboard
Package: arista
Version: 0.9.3-1
I'm trying to use a webcam to read a video. The webcam is supported with the
video-4-linux interface, so that part should not be the problem, xawtv for
example works.
Now, what I do is this:
$ arista-transcode /dev/video0 ./video.out
AttributeError: 'modul
Package: gnunet-tools
Version: 0.8.0c-8
Severity: normal
The /etc/init.d/gnunetd script gnunet-setup created has many syntax errors
(additional newlines):
#!/bin/sh
#
# Automatically created by gnunet-setup
#
PIDFILE=/var/run/gnunetd//usr/bin/gnunetd.pid
APPNAME=GNUnet
case "$1" in
star
Package: epiphany-browser
Version: 2.29.1-1
Hi,
When I visit
http://shavian.org.uk/
using Epiphany, the Shavian characters are displayed as empty
rectangles. If I visit that URL using Iceweasel, the Shavian
characters are displayed correctly. I wish that Epiphany displayed
the characters the
Celejar
--
foffl.sourceforge.net - Feeds OFFLine, an offline RSS/Atom aggregator
mailmin.sourceforge.net - remote access via secure (OpenPGP) email
ssuds.sourceforge.net - A Simple Sudoku Solver and Generator
--
To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org
with a subje
Hi!
I have the packages now building fine again and being mostly
lintian clean and nice, however some files are no longer correctly
installed. I once solved that for ksimus-boolean but can't work out
how I did it.
The current status of these packages are at [0] so if anyone wants
Package: wnpp
Severity: normal
I have spoken with the current maintainer and he is OK with orphaning and we are
hoping that the currently interested party picks up the package.
If you want to be the new maintainer, please take it -- see
http://www.debian.org/devel/wnpp/index.html#howto-o for deta
Cajus Pollmeier wrote:
> Sure. Just take it.
>
> Cheers,
> Cajus
>
>
>
> Am 08.11.2009 um 01:26 schrieb Barry deFreese :
>
>> Cajus,
>>
>> Are you OK with me orphaning gnarwl and hopefully Fancesco can take over
>> maintenance?
>>
>> Thank you,
>>
>> Barry deFreese
>> Debian QA
>>
>>
>>
>
Caj
The webkit #554718 currently on kfreebsd-amd64 blocks building of
seed, yelp, gir-repository, gstreamer0.10 (via gir-repository),
devhelp, kazehakase, ...
For details see
http://lists.debian.org/debian-devel/2009/11/msg00289.html
Petr
--
To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists
Package: libudev-dev
Version: 146-6
Severity: minor
The API Reference documentation, in /usr/share/gtk-doc/html/libudev/, is just
empty, the API index is empty, the object hierarchy is empty, a first section
is titled "[Insert title here]" and the index.html page points to
"http://[SERVER]/libude
Package: sitemap
Version: 2.3-6
Severity: important
User: debian...@lists.debian.org
Usertags: proposed-orphan
Dear Maintainer,
While reviewing some packages, your package came up as a package that
should maybe be orphaned by its maintainer, because:
* Upstream?
* Possibly inactive maintainer, l
Package: acpi-support
Version: 0.123-1
Severity: normal
/etc/acpi/lid.sh appears to treat open and close lid events by calling
screensaver routines.
But the screensaver routines affect all monitors connected, including
my external monitor.
So after I close the lid, both my external monitor and pa
1 - 100 of 411 matches
Mail list logo
