Quoting Andreas Beckmann :
On 2015-10-08 13:56, Lars Noschinski wrote:
here the additional information you requested
Thanks!
(I reinstalled nvidia-cuda-icd for this).
Although this seems not to have reenabled the backlist (you don't have
libcuda1 installed, do you?, but you h
I did not explicitly install any nvidia- or opencl-related packages, it
seems they were pulled in recursively by libhwloc.
To prevent misunderstandings: nvidia-alternative was also installed
before. I would guess that the last (successful) reboot was with
340.76-5, although 340.93-1 was inst
Package: nvidia-alternative
Version: 340.93-3
Severity: normal
Dear Maintainer,
after yesterdays updates, todays reboot lead to a system without usable
video setup. After some experiments, it turned out that this was due to
the nouveau driver not being loaded automatically (the binary nvidia
driv
Package: libdrm2
Version: 2.4.60-3
Severity: important
Package: libdrm-nouveau2
Version: 2.4.60-3
Severity: important
Dear Maintainer,
since some time, my X11 (running with Gnome) hangs often. This starts
with the applications not reacting to any input anymore, although the
mouse cursor still ca
Package: kdiff3
Version: 0.9.97-2
Followup-For: Bug #703174
Dear Maintainer,
I start kdiff3 as
kdiff3 -o out file1 file2 file3
If the file "out" already exist, I get the same problem as described above.
I.e., when trying to save the resolved file, I get two error messages:
Could not start
As far as I can gather from readin sshd(8) and the source code
(get_hostfile_hostname_ipaddr in upstream's openssh-6.1p1), at most two
key lookups are performed:
(a) [Only for protocol version 1] One for the ip address of the remote
host, with put_host_port(ntop, port)
(b) One for the
I agree with Josh's assessment. As I noted in 668239, different host
keys for different ports on the same server are clearly documented in
the OpenSSH man page. Hence, the assessment in the initial bugreport and
hostkey.patch are clearly wrong. I tested dropping hostkey.patch and
this makes paramik
At least, upstream regards this as bug:
https://savannah.gnu.org/bugs/?26701
However, nothing has happened there, yet.
-- Lars
--
To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org
Package: texlive-math-extra
Version: 2012.20120611-2
Severity: normal
Dear Maintainer,
the default settings for unicode-math require the latin modern math fonts:
-
\documentclass{article}
\usepackage{unicode-math}
\begin{document}
Test
\end{document}
-
Compiling this wi
Package: python-paramiko
Version: 1.7.7.1-3
Followup-For: Bug #668239
Dear Maintainer,
this patch does not fix the issues with duplicity; in fact, I believe this
change is wrong. As of openssh-server-1:6.0p1-2 0, sshd(8) states for the
~/.ssh/known_hosts file:
A hostname or address may opti
* Josselin Mouette [10-06-26 08:39]:
> Le jeudi 24 juin 2010 à 12:29 +0200, Lars Noschinski a écrit :
> > When I run "yelp info:make", yelp segfaults. The make-doc package is at
> > version 3.81-5.
>
> Strangely enough, I can’t reproduce that on the same archit
Package: yelp
Version: 2.30.1+webkit-1
Severity: normal
When I run "yelp info:make", yelp segfaults. The make-doc package is at
version 3.81-5.
I used
$ DEB_BUILD_OPTIONS="nostrip noopt" fakeroot apt-get -b source yelp
to rebuild yelp with debug infos and got the following backtrace:
$ gdb ./
Package: krank
Version: 0.7+dfsg1-13
Severity: normal
Level 5 is not completable on "hard", as each magnet has 4 circles, but
there are only 3 balls of each color.
-- System Information:
Debian Release: squeeze/sid
APT prefers testing
APT policy: (700, 'testing'), (650, 'unstable'), (500, 's
severity 421088 minor
thanks
Now that avr-gcc is updated, would it be possible to recompile avr-libc
for support of the new devices?
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
* Brice Goglin <[EMAIL PROTECTED]> [07-06-28 19:40]:
Lars Noschinski wrote:
Now that I upgraded to 2:2.0.0-5 and disabled 915-resolution, I get a
black screen on resume, which I didn't get before. I'll have to
investigate which change caused this behaviour, as I didn't rebo
* Brice Goglin <[EMAIL PROTECTED]> [07-06-23 11:34]:
I am contacting all of you again since everybody does not agree whether
this bug is fixed or not. It could be related to which chipset you have.
It would be good if all of you could try with the latest
xserver-xorg-video-intel driver (2:2.0.0-
Package: tig
Version: 0.7-1
Severity: normal
tig segfaults if started in pager mode. Test case:
% tig < /dev/null
Backtrace (I build tig with debug symbols from the debian sources, using
'make all-debug').
| Program received signal SIGSEGV, Segmentation fault.
| update_view_title (view=0x0
* Brice Goglin <[EMAIL PROTECTED]> [07-04-21 14:28]:
What is the status of this bug now that xserver-xorg-core 1.3 and
xserver-xorg-video-intel 2.0 are in unstable?
It works for me with xserver-xorg-video-i810 1.7.2-4. I haven't yet
upgraded to xserver-xorg-core 1.3 and xserver-xorg-video-intel
* Sebastien Delafond <[EMAIL PROTECTED]> [2006-12-29 10:48]:
gmailfs works here (same version of python-fuse, kernel 2.6.18), and
it does call Fuse.main(). I'd say xmp.py is deprecated, which is
indeed a bug (albeit a minor one), but I'd like you to tell me more
about the actual problem you're fa
Package: python-fuse
Version: 2.5-5
Severity: important
Calling Fuse.main() always results in a type error. One example for this
is /usr/share/doc/python-fuse/examples/xmp.py:
| Traceback (most recent call last):
| File "./xmp.py", line 183, in ?
| server.main()
| File "/usr/lib/python2.
Package: manpages-de
Version: 0.4-10
Severity: minor
Tags: l10n
The german manpage for date doesn't mention the "%u" format sequence:
%u day of week (1..7); 1 is Monday
-- System Information:
Debian Release: testing/unstable
APT prefers testing
APT policy: (700, 'testing'), (650,
* Lars Noschinski <[EMAIL PROTECTED]> [2006-10-07 12:45]:
I've got a similar problem with an "Intel Corporation Mobile
915GM/GMS/910GML Express Graphics Controller (rev 03)": After resume
from suspend-to-ram, the screen stays black (even the backlight); but
the Keyboard
I've got a similar problem with an "Intel Corporation Mobile
915GM/GMS/910GML Express Graphics Controller (rev 03)": After resume
from suspend-to-ram, the screen stays black (even the backlight); but
the Keyboard (and the rest of the system) continues to work.
This problem doesn't occur with 1.5.
The corresponding bug for kernel-package is #377267 (submitted by Kevin
Baradon)
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
Package: module-assistant
Version: 0.10.4
Severity: important
module-assistant does not work properly for 2.6.18-rc1, as there was a
change in include/linux/version.h which removed UTS_RELEASE:
t 63104eec234bdecb55fd9c15467ae00d0a3f42ac
Author: Sam Ravnborg <[EMAIL PROTECTED]>
Date: Mon Jul 3
* Hakan Ardo <[EMAIL PROTECTED]> [2006-02-17 13:06]:
Package: gcc-avr Version: 1:4.0.2-1 Severity: wishlist
It would be nice, if you could install multiple versions of the
gcc-avr, as you can do with the regular gcc packages, as there are
some differences between avr-gcc 3.4.3 and avr-gcc 4.0.3.
Package: gcc-avr
Version: 1:4.0.2-1
Severity: wishlist
It would be nice, if you could install multiple versions of the gcc-avr,
as you can do with the regular gcc packages, as there are some
differences between avr-gcc 3.4.3 and avr-gcc 4.0.3.
-- System Information:
Debian Release: testing/unstab
Package: gcc-avr
Version: 1:4.0.2-1
Severity: minor
gcc-avr suggests the gcc-3.2 package which isn't available in neither
stable, testing or unstable.
-- System Information:
Debian Release: testing/unstable
APT prefers testing
APT policy: (990, 'testing'), (600, 'unstable')
Architecture: i386
Package: udev
Version: 0.070-3
Severity: normal
I've defined a custom udev rule to create a symlink for my trackpoint,
which is attached to synaptics touchpad pass-through ps2 port:
# The trackpoint is attached to the pass-through port of the touchpad
BUS=="serio", KERNEL=="mouse[0-9]" SYSFS{dev
29 matches
Mail list logo
