I did it. Ive flashed Unslung 6.10 Beta and set the network
configuration there. After that i flashed the 5.0beta2 again and now i
can connect to the box.
Thx for help!
Steve
Martin Michlmayr schrieb:
> Also, can you try if the 4.0 installer image works?
>
--
To UNSUBSCRIBE, email to [EMAIL
Also, can you try if the 4.0 installer image works?
--
Martin Michlmayr
http://www.cyrius.com/
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
* Steve Wagner <[EMAIL PROTECTED]> [2008-08-09 12:56]:
> I now have ereased my sysconf section with this tutorial
> http://www.nslu2-linux.org/wiki/HowTo/ResetSysConf . DHCP is
> working in my network, but the slug dose not boot again. Any other
> suggestions?
Remove the RTC battery.
Also, are
I now have ereased my sysconf section with this tutorial
http://www.nslu2-linux.org/wiki/HowTo/ResetSysConf .
DHCP is working in my network, but the slug dose not boot again. Any
other suggestions?
Steve
Steve Wagner schrieb:
Martin Michlmayr schrieb:
> * Steve Wagner <[EMAIL PROTECTED]> [20
Martin Michlmayr schrieb:
> * Steve Wagner <[EMAIL PROTECTED]> [2008-08-06 17:17]:
>> Set slug is set to an static ip adress, but i dont know where i dose
>> this. So i can not check if the data is correct. But the SlugOSLE
>> image boots after flashing without changes on the network
>> configura
* Steve Wagner <[EMAIL PROTECTED]> [2008-08-06 17:17]:
> Set slug is set to an static ip adress, but i dont know where i dose
> this. So i can not check if the data is correct. But the SlugOSLE
> image boots after flashing without changes on the network
> configuration and is available on the net
Hi, ive flashed the beta image from here:
http://www.cyrius.com/journal/debian/nslu2/lenny-beta2 .
After flashing all leds are on and one green led after another go off
till only the orange led is on. Ive waited 20 minutes but nothing happens.
I have tryed both images ( arm and armel ) but its a
7 matches
Mail list logo
