Re: NSLU2 (Slug) fails to boot with second drive connected

I put a 2 in the fstab due to some comments in the man page. The sixth field, (fs_passno), is used by the fsck(8) program to deter- mine the order in which filesystem checks are done at reboot time. The root filesystem should be specified with a fs_passno of 1, and other fi

Re: NSLU2 (Slug) fails to boot with second drive connected

Aaron Klein wrote: > I tried the following which is the last part of the directions for > mounting with UUID's. > > Then update the initramfs: > > $ sudo update-initramfs -u > > and flash the new initramfs > > $ sudo flash-kernel > > Even with both drives having UUID's in /etc/fstab and then d

Re: NSLU2 (Slug) fails to boot with second drive connected

I tried the following which is the last part of the directions for mounting with UUID's. Then update the initramfs: $ sudo update-initramfs -u and flash the new initramfs $ sudo flash-kernel Even with both drives having UUID's in /etc/fstab and then doing the above two commands after putting

Re: NSLU2 (Slug) fails to boot with second drive connected

That switching between sda and sdb is the reason you need to use the UUIDs, from what I remember. So you should probably use UUIDs for all the USB partitions. Someone else will have to chime in here, but I think you also need to update the fstab in the slug's flash memory. There's a very simple co

Re: NSLU2 (Slug) fails to boot with second drive connected

Yes I was trying to search the website and didnt find anything (i guess I was using the wrong keywords) and then I went to search this mail list with the web search but got a 500 error page. After I sent this message I looked back as far as April 2007 in the archives and found the information tha

Fwd: NSLU2 (Slug) fails to boot with second drive connected

Hi Aaron, From what I've read before, you need to mount the disks using UUIDs instead of /dev/sd* type assignments. I believe there is a wiki page regarding this on www.nslu2-linux.org, but I can't find it just now. Maybe search the archives of this list? Good luck Stuart On 6/18/07, Aaron Klei

NSLU2 (Slug) fails to boot with second drive connected

I am having an issue with my recently hacked Slug. I have Debian running on on the slug and all is well with Samba setup and getting in via SSH when I have my OS disk in port 1. I have a second disk that I recently put on port 2 and now when I boot up the unit it hangs at some point in the boot