On Jun 14 2019, Finn Thain wrote:
> On Thu, 13 Jun 2019, Andreas Schwab wrote:
>
>> On Jun 13 2019, Finn Thain wrote:
>>
>> > IMHO these log messages are a bit silly --
>> >
>> > [**] (3 of 3) A start job is running for /dev/sda4 (1min 5s / 1min 36s)
>> > ...
>> > [ TIME ] Timed out waiting
On Thu, 13 Jun 2019, user...@yahoo.com wrote:
>
> > ... It will be interesting to see how much more quickly you can boot
> > this system using openrc or sysvinit. (I see that the 450 seconds
> > logged here includes the 100 second delay caused by CONFIG_CRYPTO_DH;
> > you can avoid that by add
On 6/13/19 6:14 PM, user...@yahoo.com wrote:
> ... But there's still a problem, and I'll have to
> keep investigating. Logins at the framebuffer console, serial console
> and ssh all hang. Control-C cancels the login. On the serial console,
> ...
Sorry for the excessive messages. Logins appear
On 6/12/19 11:45 PM, Finn Thain wrote:
> On Wed, 12 Jun 2019, user...@yahoo.com wrote:
>
>> On 6/10/19 9:32 PM, user...@yahoo.com wrote:
>> ...
>> Here are a few observations and comments:
>>
>> 1) Approximate times were as follows:
>>a) 30 min - from initial setup to prompting of a Debian mir
On Thu, 13 Jun 2019, Andreas Schwab wrote:
> On Jun 13 2019, Finn Thain wrote:
>
> > IMHO these log messages are a bit silly --
> >
> > [**] (3 of 3) A start job is running for /dev/sda4 (1min 5s / 1min 36s)
> > ...
> > [ TIME ] Timed out waiting for device /dev/sda4.
> > [DEPEND] Dependency
On Jun 13 2019, Finn Thain wrote:
> IMHO these log messages are a bit silly --
>
> [**] (3 of 3) A start job is running for /dev/sda4 (1min 5s / 1min 36s)
> ...
> [ TIME ] Timed out waiting for device /dev/sda4.
> [DEPEND] Dependency failed for /dev/sda4.
> [DEPEND] Dependency failed for Swap
On Thu, 13 Jun 2019, John Paul Adrian Glaubitz wrote:
> > I'm no expert with the debian installer, but I suspect you should be
> > using the initrd for the netinst method (?)
>
> There is no "netinst" initrd. There are initrds for "cdrom" and
> "netboot".
>
> NETINST is a normal CD-ROM install
On 6/10/19 4:58 AM, user...@yahoo.com wrote:
> The post-installation initrd could be copied to MacOS and then specified
> in Penguin, same as the installation initrd.
Patches are welcome anytime. But currently, the installer for m68k does not have
any support for installing a working bootloader on
On 6/10/19 3:14 AM, user...@yahoo.com wrote:
>> Maybe you need to use a different initrd? There are several on the ISO.
>
> I see these:
> ./cdrom/initrd.gz
> ./hd-media/initrd.gz
> ./nativehd/initrd.gz
>
> I used ./cdrom/initrd.gz.
Which is the correct initrd for CD-ROM installations. The othe
On 6/10/19 2:11 AM, Finn Thain wrote:
>> I tried twice using the stock CD-ROM drive and once using a more modern
>> CD-ROM drive. In all three cases, installation of the basic system
>> succeeded after about four hours, then stopped at the "Configure the
>> package manager" menu -- "Your install
On 6/10/19 12:01 AM, Christian T. Steigies wrote:
>> I tried leaving out the slash after debian-ports; apt-get still fails to
>> find anything. Perhaps something failed to get installed or configured
>> after the installation hung.
>
> I doubt that.
Again, actual error messages would be helpful.
On 6/9/19 10:16 PM, user...@yahoo.com wrote:
> The mailing list seems to have munged my message, adding extra question
> marks. I'm not sure why, maybe because my mail client formatted the
> message in HTML instead of plain text (sorry about that).
>
> Anyway, here it is again, hopefully this wil
12 matches
Mail list logo
