dircmp for cygwin?

hi there cygwin is great! it brings my windows pc closer to unix! however i couldn't find dircmp in the collection of tools. is there a dircmp implementation for cygwin? thanks a lot, leo -- Unsubscribe info: http://cygwin.com/ml/#unsubscribe-simple Problem reports:

Re: dircmp for cygwin?

thanks for the responses! diff -r will do it for me. cheers, leo - Original Message - From: "Yitzchak Scott-Thoennes" <[EMAIL PROTECTED]> To: <[EMAIL PROTECTED]> Sent: Monday, November 17, 2003 2:02 PM Subject: Re: dircmp for cygwin? > On Sun, Nov 16, 2003 a

Re: bash under emacs gives "cannot set terminal process group"

emacs with the following version string: GNU Emacs 23.4.1 (i386-mingw-nt6.1.7601) of 2012-02-05 on MARVIN Cygwin cygcheck output attached. How can I fix this? Many, many thanks for any pointers, Leo > Hi there > > I upgraded my Cygwin installation to Cygwin dll 1.7.11-1. Since

Re: bash under emacs gives "cannot set terminal process group" [SEC=UNCLASSIFIED]

> On 2/28/2012 5:16 AM, Leo wrote: >I'm running emacs with the following version string: GNU Emacs 23.4.1 (i386-mingw-nt6.1.7601) of 2012-02-05 on MARVIN >This is the native Windows build of emacs, not Cygwin's emacs. Hi Ken Yep, I do run the native Windows build - and the

How to revert to older Cygwin1 dll?

that they are compatible with the older cygwin1 all? Many thanks. Any help is appreciated. It is very annoying to have no bash in NTemacs! Leo -- Problem reports: http://cygwin.com/problems.html FAQ: http://cygwin.com/faq/ Documentation: http://cygwin.com/docs.html

Re: How to revert to older Cygwin1 dll?

On 01/03/2012, at 12:25 AM, Markus Hoenicka wrote: > Leo was heard to say: > >> It did work before, so I would like to revert to an older version of the >> cygwin1.dll. How can I do this? And is there a way to revert the other >> packages so that they are compatibl

Re: How to revert to older Cygwin1 dll?

>> install cygwin, X/cygwin, configure X, run an external bash and then kick >> off emacs - just in order to use a bash inside emacs. > > You don't need to run "external bash"… > How do I do this? I thought I have to instantiate an X server from a cygwin/b

Re: bash under emacs gives "cannot set terminal process group"

have to kill the bash then. :-( I still would like to find out what has change in the cygwin1 setup??? The I/O control must have changed somehow. Maybe then it would be possible to invoke the cygwin bash differently, so that it plays nicely with the native emacs. Thanks, Leo -- Problem reports:

Re: Cygwin Emacs and windows paths

Cygwin. (In that case I had to > convert from POSIX paths to Windows paths.) Take a look at the > Cygwin-specific code in the function browse-url-file-url in > lisp/net/browse-url.el. You may be able to use a similar idea. > Thanks heaps for this! I had a quick look at brows

Re: Cygwin Emacs and windows paths

On 12/03/2012, at 10:09 PM, Ken Jackson wrote: > On 03/10/2012 01:17 AM, Leo wrote: >> Now my normal Windows paths copied from Windows Explorer don't work >> anymore in Emacs - and vice versa. I know I can use `cygpath` to >> convert /on the command line/, but is ther

emacsclient from cygwin distro does not work with Cygwin emacs

I have the following lines: (require 'server) (setq server-auth-dir "/cygdrive/c/home/.emacsdata/server/") (server-start) So emacs *should* put the server file in the /cygdrive/c/home/.emacsdata/server/, but it doesn't. What is going wrong her

Re: emacsclient from cygwin distro does not work with Cygwin emacs

On 13/03/2012, at 7:04 PM, Markus Hoenicka wrote: > Hi, > > Leo was heard to say: > >> I try to use emacsclient with Cygwin emacs, but it does not >> work. emacsclient returns: >> >> emacsclient: error accessing server file >> "/cygd

Re: emacsclient from cygwin distro does not work with Cygwin emacs

On 14/03/2012, at 12:36 AM, Ken Brown wrote: > On 3/13/2012 9:04 AM, Markus Hoenicka wrote: >> Leo was heard to say: >> >>> Well, the directory does exist. Furthermore I tried it with >>> "~/.emacsdata/server/" (tilde instead of expanded home direct

Re: emacsclient from cygwin distro does not work with Cygwin emacs

On 14/03/2012, at 12:36 AM, Ken Brown wrote: On 3/13/2012 9:04 AM, Markus Hoenicka wrote: Leo was heard to say: Well, the directory does exist. Furthermore I tried it with "~/.emacsdata/server/" (tilde instead of expanded home directory) first and it doesn't work. Strange th

How to I generate a hyper or super modifier in cygwin emacs under X

ift to meta, instead mapping some to Hyper (H- ) or Super (S- ) Any workaround? or do I do something wrongly? Many thanks, Leo -- Problem reports: http://cygwin.com/problems.html FAQ: http://cygwin.com/faq/ Documentation: http://cygwin.com/docs.html Unsubscr

Re: emacsclient from cygwin distro does not work with Cygwin emacs

On 15/03/2012, at 2:51 AM, Ken Brown wrote: > On 3/14/2012 6:19 AM, Leo wrote: >> emacsclient works fine when I unset the environment variable >> "EMACS_SERVER_FILE". This holds true regardless what server-auth-dir is >> set to. >> >> In order to pro

Re: How to I generate a hyper or super modifier in cygwin emacs under X

On 15/03/2012, at 3:41 AM, Jon TURNEY wrote: > On 14/03/2012 16:03, Ken Brown wrote: >> On 3/14/2012 7:19 AM, Leo wrote: >>> I try to set up emacs in a way that I can use key bindings like H-x >>> (Hyper + character x). > This is the wrong approach. Changin

squid command doesn't do anything

Hi there I installed the binary release of squid 2.7, but calling squid doesn't do anything. Even squid -h or squid -v just returns without any message. Any suggestion? Many thanks, Leo -- Problem reports: http://cygwin.com/problems.html FAQ: http://cygwi

Re: squid command doesn't do anything

> On 1/30/2013 10:21 PM, Leo wrote: > Hi there > > I installed the binary release of squid 2.7, but calling squid doesn't do > anything. > > Even squid -h or squid -v just returns without any message. > > Any suggestion? > > Presumably, you're miss

Re: squid command doesn't do anything

> On 01/31/2013 05:52 PM, Larry Hall (Cygwin) wrote: > On 1/31/2013 8:29 AM, leo wrote: > > > > I have confirmed that all these dlls already existed on my system. Still > squid does do anything. > > > OK, I installed squid and noticed that invoking /usr/sbin

Problems with protocol 1 from OpenSSH

c:/ssh/sshd.pid Protocol 1 PasswordAuthentication yes IgnoreRhosts yes IgnoreUserKnownHosts yes RhostsAuthentication no RhostsRSAAuthentication no Can anyone tell me what is wrong. If I chose Protocol 2 all is working well. Reg

something goes wrong while compiling linux kernel under cygwin

Hi, i'm a newbie to use cygwin under windows. I have known steps of compiling kernel under Linux. For some reason, i want to compile linux kernel under Windows now. But i met some problems which stops me to continue. The error stdout like this: [EMAIL PROTECTED] /kernel/linux-2.6.16.36 $make co

Re: something goes wrong while compiling linux kernel under cygwin

l already notice this, so when you installed and > select the gcc and kernel to compile, it will compile ok most of time > because it already skip the modules which can cause that problem. > > Good luck > > Regards, > Andy > > On 12/16/06, Leo Liu gmail.com> wr

Re: something goes wrong while compiling linux kernel under cygwin

andy wang gmail.com> writes: > > > > > But there is a little issue when i'm using command: > > "mount -o cygexec -o managed /cygdrive/d/testdir1 /testdir2". > "man mount" you can see the help the mount. you can always find some > answers if you try "man your-command". > The first path is Windows

Re: something goes wrong while compiling linux kernel under cygwin

have modified demo-i686.sh to use eval `cat i686.dat gcc-3.4.5-glibc- 2.3.2.dat` sh all.sh --notest instead of default gcc-4.1.0, and demo-i686.sh can be finished this time. But i don't know what next to do or how to use the toolchains re-compiled by crosstool for compiling linux kernel under c

Re: something goes wrong while compiling linux kernel under cygwin

aspam sourceware.org > > Cygwin Co-Project Leader aaaspam duffek.com > > TimeSys, Inc. > > > > Hi, Leo: > > Why not try to add "--testlinux" on the end of the demo line..., just like this > " `cat alpha.dat gcc-3.

problem with mkdir //fileserver when opening cygwin terminal

Hello, I've been having this problem after a while. It seems it appeared after I removed the 32bits versions, and installed the 64bits one. Every time I open a terminal, I got this message: mkdir: cannot create directory `//fileserver': Read-only file system //fileserver/public/llagos could not

Re: problem with mkdir //fileserver when opening cygwin terminal

Thanks Larry, I opened a cmd.exe terminal, and for HOME I got: C:\Users\llagos>set | findstr HOME HOMEDRIVE=C: HOMEPATH=\Users\llagos NCHOME=C:\IBM\Tivoli\Netcool OMNIHOME=C:\IBM\Tivoli\Netcool\omnibus C:\Users\llagos> No %HOME% on my windows... Regards, -- Problem reports: http://cygwi

Re: problem with mkdir //fileserver when opening cygwin terminal

Hi, Attached is the cygcheck output. Regards, On Fri, Mar 21, 2014 at 3:55 PM, Leo Lagos wrote: > Thanks Larry, > > I opened a cmd.exe terminal, and for HOME I got: > > C:\Users\llagos>set | findstr HOME > HOMEDRIVE=C: > HOMEPATH=\Users\llagos > NCHOME=C:\IBM\Tivol

Re: problem with mkdir //fileserver when opening cygwin terminal

? I do remember a mkpasswd or similar command..??? Regards, On Mon, Mar 24, 2014 at 2:00 PM, Larry Hall (Cygwin) > On 3/24/2014 3:26 PM, Leo Lagos wrote: >> >> Hi, >> >> Attached is the cygcheck output. > > > OK, nothing is obviously wrong there. That leaves &

Re: problem with mkdir //fileserver when opening cygwin terminal

HI Larry, I created a new /etc/passwd by using: llagos@T420-LLAGOS ~ $ mkpasswd -l -c -p /home That solved the issue! Thanks a lot, On Tue, Mar 25, 2014 at 9:57 AM, Larry Hall (Cygwin) > On 3/25/2014 10:54 AM, Leo Lagos wrote: >> >> Hi Larry, >> >> Yes, that seems

can not enter password for SSH when running in another terminal (RXVT)

l, like RXVT on this case? Thanks a lot, Leo -- Problem reports: http://cygwin.com/problems.html FAQ: http://cygwin.com/faq/ Documentation: http://cygwin.com/docs.html Unsubscribe info: http://cygwin.com/ml/#unsubscribe-simple

Re: can not enter password for SSH when running in another terminal (RXVT)

Thanks... I'll try it... tough I don't like betas that much... On Tue, Dec 15, 2009 at 12:41 PM, Larry Hall (Cygwin) wrote: > On 12/15/2009 01:25 PM, Leo Lagos wrote: >> >> Hi... I've got the following problem, that I'll describe with the >> steps, so You

Re: can not enter password for SSH when running in another terminal (RXVT)

yes... running cygwin SSH from the openssh package... Regards, Leo On Tue, Dec 15, 2009 at 1:02 PM, Thrall, Bryan wrote: > Leo Lagos wrote on 2009-12-15: >> Hi... I've got the following problem, that I'll describe with the >> steps, so You can reproduce it... >>

Re: can not enter password for SSH when running in another terminal (RXVT)

done :) Regards, Leo On Tue, Dec 15, 2009 at 3:06 PM, Andy Koppe wrote: > 2009/12/15 Leo Lagos: >>>> Hi... I've got the following problem, that I'll describe with the >>>> steps, so You can reproduce it... >>>> >>>> 1. open cygwin (nor

Broken symlinks after rsync

fixed without a complete reinstall / recreation of every link? --Leo -- Problem reports: http://cygwin.com/problems.html FAQ: http://cygwin.com/faq/ Documentation: http://cygwin.com/docs.html Unsubscribe info: http://cygwin.com/ml/#unsubscribe-simple

can setup.exe uninstall all X11 packages automatically?

Hi, I want to remove all X11 related since it's no longer something I really use. I executed setup.exe, tried to do this with just one check (uninstall x11-org-server, I think I did), but it only uninstalled that package alone! I expected setup.exe to be smart enough to tell me "if you uninstall

Aspen login

Good Morning, I am using Aspen Tech on my computer but when i try to log in with my data this error appears: WARNING: Couldn't compute FAST_CWD pointer. Please report this problem to the public mailing list cygwin@cygwin.com What should I do Best regards Domenico Leo -- Problem re

RE: DAST related issue

king related access & DAST WI tips , no problem & hints found After several trail , I reinstall DAST , some bugs appear at install interface , please refer 3rd attached file . Could you do me a favor how to eliminate this or get DAST reinstalled ? Best regards, Leo GUO Engineering Cons

Recall: DAST related issue

GUO Leo (BST/ECS2-CN) would like to recall the message, "DAST related issue ". -- Problem reports: https://cygwin.com/problems.html FAQ: https://cygwin.com/faq/ Documentation:https://cygwin.com/docs.html Unsubscribe info: https://cygwin.com/ml/#u