What is the easiest way to open mintty with high priority by default?
Adding /High to the shortcut command string no longer seems to work in
Windows 11.
--
Problem reports: https://cygwin.com/problems.html
FAQ: https://cygwin.com/faq/
Documentation:https://cygwin.
On 12/20/2020 12:51 PM, Andrey Repin wrote:
Greetings, Charles Russell!
SOLVED
On 12/17/2020 3:24 PM, Erik Soderquist wrote:
>> in some cases I could not find any real
>> issue, but deleting and recreating the rules fixed the issue.
That did the trick: simply
On 12/19/2020 4:10 PM, Brian Inglis wrote:
On 2020-12-19 00:40, Achim Gratz wrote:
Charles Russell writes:
My ISP (AT&T) currently seems to be blocking mail to news.gmane.io. Is
there some other way to maintain thread coherence without subscribing
to the mailing list, which would inundat
SOLVED
On 12/17/2020 3:24 PM, Erik Soderquist wrote:
> in some cases I could not find any real
> issue, but deleting and recreating the rules fixed the issue.
That did the trick: simply deleting and reinstating the firewall
settings for sshd solved the problem on both computers.
I had troubl
On 12/17/2020 3:09 PM, Brian Inglis wrote:
Have you checked your new router to see what default rules are enabled
there?
The router firewall is disabled. (I have a another router serving as a
firewall between it and the modem.) Besides, all hosts are on the local
side of the new router, an
My ISP (AT&T) currently seems to be blocking mail to news.gmane.io. Is
there some other way to maintain thread coherence without subscribing to
the mailing list, which would inundate my inbox?
--
Problem reports: https://cygwin.com/problems.html
FAQ: https://cygwin.com/faq/
On 12/17/2020 11:49 AM, Bill Stewart wrote:
> Make sure to look carefully through all of the firewall rules and
> check whether there is a rule blocking that executable or port.
>
Selecting "Advanced Settings" and then "incoming rules", I see one rule
for sshd private: enabled, allowed and one
On 12/16/2020 9:37 AM, wors...@bellsouth.net wrote:
> While installing a new router, I changed my local network from
> 192.168.4.* to 192.168.50.*. This seems to have broken Cygwin sshd on
> both of my remote computers, but only for Cygwin; sshd works fine if I
> boot the remote computer from a li
Problem solved (probably).
When setting out to downgrade gfortran, I found that there was a slight
upgrade available - 9.3.0.1 to 9.3.0.2. I upgraded, ran "make clean" and
"make test". This time it ran to completion with no error message.
Seems unlikely this minor upgrade fixed a major probl
On 4/18/2020 11:23 AM, Brian Inglis wrote:
what compiler version are you using on Debian
$ gfortran --version
GNU Fortran (Debian 8.3.0-6) 8.3.0
When support ended for g77 I feared for my collection of old fortran
code, but it all worked fine under gfortran after a few trivial changes
that I
On 4/17/2020 2:46 PM, Brian Inglis wrote:
Try running under strace:
$ strace -o prog.strace prog -options... args...
or gdb:
$ gdb prog
(gdb) run -options... args...
SEGV diagnostics
(gdb) bt
(gdb) q
and attach or paste all output.
The follow
On 4/17/2020 2:39 PM, Marco Atzeri via Cygwin wrote:
in what type of statement have you the segfault ?
I recently tried building and running some old fortran code using what I
think is the current version of cygwin gfortran (--version reports
9.3.0) and was surprised to get a run-time error
On 1/17/2019 8:23 AM, Corinna Vinschen wrote:
On Jan 16 15:31, Bill Stewart wrote:
I installed the OpenSSH server as a service using ssh-host-config, and all
is working.
I'm running Windows 10 (1803).
I renamed the sshd privilege separation (privsep) account to something else
and restarted the
On 5/4/2017 3:31 PM, Fran Litterio wrote:
You can try opening the Services Control Panel app (run "start
services.msc" in a Command Prompt) and changing the startup type of
service "Cygwin sshd" to "Automatic (Delayed Start)".
Yes! I was looking in the alphabetized list of services for sshd
On 5/4/2017 3:31 PM, Fran Litterio wrote:
> On 4/28/2017 11:48 AM, Charles Russell wrote:
>> Starting from a default installation of sshd that was working
>> properly, I tried uninstalling sshd with cygrunsrv and reinstalling
>> with --type manual.
>>
>> (cygrunsr
On 5/4/2017 3:31 PM, Fran Litterio wrote:
On 4/28/2017 11:48 AM, Charles Russell wrote:
Starting from a default installation of sshd that was working
properly, I tried uninstalling sshd with cygrunsrv and reinstalling
with --type manual.
(cygrunsrv --install sshd --path /usr/sbin/sshd.exe
On 4/28/2017 10:48 AM, Charles Russell wrote:
Starting from a default installation of sshd that was working properly,
I tried uninstalling sshd with cygrunsrv and reinstalling with --type
manual.
(cygrunsrv --install sshd --path /usr/sbin/sshd.exe --type manual)
After rebooting I cannot start
Starting from a default installation of sshd that was working properly,
I tried uninstalling sshd with cygrunsrv and reinstalling with --type
manual.
(cygrunsrv --install sshd --path /usr/sbin/sshd.exe --type manual)
After rebooting I cannot start sshd with cygrunsrv. Instead, I get
message
What is this "update"? The cited homepage shows no updates since 2008
("browse all files"). The green button shows last update 2013, but the
version number is identical to that of 2008. The last entry in the cited
changelog is 2008.
I find pal useful, and if someone is actively maintaining it
On 12/14/2015 8:16 AM, Marco Atzeri wrote:
On 14/12/2015 15:06, sisyph...@optusnet.com.au wrote:
Hi,
Last time I built gmp on Cygwin for Windows it was using gcc-3.4.5 - and
was, I think, done as a cross-compilation involving the -mno-cygwin
option.
Am I right in thinking that the days of "-mn
The following works on Windows XP, but fails on Windows 7, apparently
because of some permission setting (even in Administrator mode).
# dd if=binary.img of=/dev/sdb
dd: writing to `/dev/sdb': Permission denied
3+0 records in
2+0 records out
1024 bytes (1.0 kB) copied, 0.081 s, 12.6 kB/s
I woul
Is there some way to read the volume label on a USB flash drive?
Something like blkid in linux?
--
Problem reports: http://cygwin.com/problems.html
FAQ: http://cygwin.com/faq/
Documentation: http://cygwin.com/docs.html
Unsubscribe info: http://cygwin.com/ml/
ccrypt version 1.9 builds out-of-the box on Cygwin, so if anyone
maintains this package the upgrade should be trivial.
There are some useful new features.
--
Problem reports: http://cygwin.com/problems.html
FAQ: http://cygwin.com/faq/
Documentation: http://cygwin
When I use scp -r for recursive copy from Win7 to a remote XP machine,
the properties for the new directory show the message "The permissions
on ... are incorrectly ordered ..." This is for a simple test case.
For an attempted network backup, the process hung up, and I could get
access to the
* From: "Dave Korn"
On 15 March 2007 18:05, Charles D. Russell wrote:
>
>
> Dave Korn wrote:
> **as an attachment please**
>
> __
>
> I tried, really. Before sending, I looked through the Thun
* From: "Larry Hall (Cygwin)"
Charles D. Russell wrote:
What I am getting, with a formerly working installation, is:
$ ssh sony06
ssh: sony06: no address associated with name
This is likely a DNS/DHCP problem (i.e. not a Cygwin problem). What do you
get when you "ping
26 matches
Mail list logo
