Hi All,
Hope you are doing well.
Platform Baytrail
Issue: Graphics External Display
VBIOS/VBT data
trying to see the MMIO or VBIOS data when a external display device is
plugged/unplugged with DP/HDMI interface, which MMIO register is set or
cleared
Any inputs are appreciated, some of the regi
Hello Rao,
On 30.07.21 13:53, Rao G wrote:
> trying to see the MMIO or VBIOS data when a external display device is
> plugged/unplugged with DP/HDMI interface, which MMIO register is set or
> cleared
I think you are looking at the right register (last one below).
>
> Any inputs are appreciated,
Hi Nico,
Thanks for your email & response.
The problem originally I had was that on PortC, DP/HDMI did not work for
the external display in the OS, In BIOS it looked good,
so I configured PortC as an eDP interface then the external display started
working in the OS.
Now at runtime when there is
Hi,
On 30.07.21 16:47, Rao G wrote:
> The problem originally I had was that on PortC, DP/HDMI did not work for
> the external display in the OS, In BIOS it looked good,
> so I configured PortC as an eDP interface then the external display started
> working in the OS.
this sounds much like you are
Hi,
Please find the latest report on new defect(s) introduced to coreboot found
with Coverity Scan.
20 new defect(s) introduced to coreboot found with Coverity Scan.
13 defect(s), reported by Coverity Scan earlier, were marked fixed in the
recent build analyzed by Coverity Scan.
New defect(s)
Issue #314 has been reported by akjuxr3 akjuxr3.
Bug #314: Please disable 'administrator approval' on ticket.coreboot.org
https://ticket.coreboot.org/issues/314
* Author: akjuxr3 akjuxr3
* Status: New
* Priority: Normal
* Assignee:
* Category: infrastruct
Thanks Nico.
HPD is active , measured the signal
Configured Ports
1.DDI0- PortB - DP with HDMI/DVI is good in BIOS & OS
2.DDI1- PortC - DP with HDMI/DVI is good in BIOS, i915 was turning off the
DP display (Never understood the reason)
So configured PortC with eDP
If there is no way BIOS to det
On 30.07.21 18:59, Rao G wrote:
> Thanks Nico.
>
> HPD is active , measured the signal
Is your coreboot port public somewhere? If the hardware is fine, maybe
the firmware isn't?
>
> Configured Ports
> 1.DDI0- PortB - DP with HDMI/DVI is good in BIOS & OS
> 2.DDI1- PortC - DP with HDMI/DVI is good
Hello,
Does anyone know if coreboot supports the ASRock H110M-DVS R3.0
mainboard? The documentation doesn't mention the revision number but the
links are all for the R2.0 board and I can only find R3.0 boards for sale.
Thanks,
Alex
___
coreboot mai
9 matches
Mail list logo