FWIW, earlier this season, I replaced my TackTick wireless wind instrument
with Raymarine's latest offering. You may recall Raymarine acquired
TackTick some years ago. Except for the branding, The replacement is
identical to the original, which worked well for 13 seasons. In fact, the
original u
> I’d very much like to integrate my speed and depth with a NMEA 2000
> chartplotter (Raymarine ES series) and eventually also add wind instruments
> and digital radar but not sure if I need to upgrade the transducers.
>
> Chuck Gilchrest
>
> Half Magic
>
> 83 Landfall
n fit into the hole from the old transducer (not sure the
> brand but could find out) with no modification. Dave
>
> S/V Aries
> 1990 C&C 34+
> New London, CT
>
>
>
>> On Sep 25, 2021, at 7:42 PM, Peter W. via CnC-List
>> wrote:
>>
>> I am
Umbrella policy that I have is essentially a “personal liability “ policy,
covering any instance where I am at risk for damages. It is not specific to a
watercraft or land craft.
Pete W.
Sent from my iPhone
> On Oct 14, 2021, at 1:57 PM, Joe Della Barba via CnC-List
> wrote:
>
>
> All the
I use those long, styrofoam floats you see at pool and beach. Because they are
hollow. You can run a line through them. I have a split backstay which helps
Pete W
Siren Song
C&C30-2
Irvington va
Sent from my iPhone
> On Jul 26, 2022, at 11:22 PM, Wade Glew via CnC-List
> wrote:
>
>
> Ha
My fuel cap requires a winch handle to open it, however, the “star” shaped
inset is badly worn, making it difficult to unscrew. It is OEM and 30+ years
old (Perko brand), but I can’t find a suitable replacement.
Anyone found one? Or, has anyone been able to refurbish theirs?
Pete W.
Siren Son
lling the new fill unit. I was reparing areas of the
>> > deck, so I had the material and tools to do it, plus I was painting the
>> > deck, so it became a small part of much larger project and turned out
>> > pretty nice.
>> >
>> > Chuck Scheaffer Re
I use 10-30, which I think Yanmar recommends. The Rotella works well. I keep
the level of oil at about 80% of full and I see very little smoke and don’t
have to add oil between changes (once a season).
Pete W.
Siren Song
C&C30-2
Irvington, Va
Sent from my iPhone
> On Sep 26, 2022, at 3:51 PM
Try Bay Shore Marine in Annapolis.
Pete W.
Siren Song
C&C 30-2
Irvington, Va
Sent from my iPad
> On May 19, 2023, at 11:41 AM, Thomas Perison via CnC-List
> wrote:
>
> Hello all -
> Asking if by chance anyone in the Solomons MD area knows where I can get a
> water pump for my Yanmar 2GM.
I am looking for feedback on dual output controllers.
I want to add a battery bank to my existing setup, but I have a single
controller now. It’s a Renogy Rover 20A and has worked fine; however, they
don’t offer a dual output controller currently.
Thanks in advance for your help!
Pete W.
Sir
I like to keep my fuel tank as full as possible as the best way to keep out
water.
Can anyone share their procedure to determine (with reasonable accuracy) how
much fuel their tank holds, at any given time?
While I have a fuel gauge, it isn’t very accurate as it under-estimates how
much fuel is
sage-
> From: Tom Buscaglia via CnC-List
> Sent: Tuesday, June 27, 2023 12:52 PM
> To: Peter W. via CnC-List
> Cc: Tom Buscaglia
> Subject: Stus-List Re: Accurate Fuel Tank Measurements
>
> I use my Hobbes meter. I take a picture at each fill-up and try to keep the
re calibrated more accurately than most
> boat fuel tanks!
>
> Charlie Nelson
> Water Phantom
> C&C 36 XL/kcb
>
>
> Sent from the all new AOL app for iOS
>
> On Tuesday, June 27, 2023, 9:34 PM, Peter W. via CnC-List
> wrote:
>
> Possibly. I’ll investiga
Amazon?Sent from my iPhoneOn Aug 14, 2023, at 10:51 AM, Joel Aronson via CnC-List wrote:Dave,I purchased batteries from lythbattery.com in China. No complaints!Check your insurance policy to make sure the batteries are not excluded before you invest the money.JoelOn Mon, Aug 14, 2023 at 10:33 AM
Anyone had any experience to share regarding the replacement of hand rails?
I am looking for two(2) 6-loop hand rails for my 30MKII.
I found several web sites, but I am not familiar with any of vendors.
Also, from the (lack of) info, I can’t determine if the loops will match up
with the existing h
ess steel was built straight, it was flexible enough to bend to match the deck curve as I installed it. Some say it gets hot in the sun but at least here in NE I haven't had a problem with it getting too hot to touch. NathanS/V Wisper1981 C&C 34 On Wed, Nov 29, 2023 at 8:28 PM Peter W. via C
looking for, I changed to stainless 3
> years ago and the old ones are in my boat shed.
>
> Allan Rheaume
> Drumroll
> 30-2 # 90
>
> On Wednesday, November 29, 2023 at 08:28:57 p.m. EST, Peter W. via CnC-List
> wrote:
>
>
> Anyone had any experience to share
I’ve had good experiences with bay shore marine engines in Annapolis.Pete W.90 C&C 30-2Irvington, Va.Sent from my iPadOn Feb 13, 2024, at 10:45 AM, Doug Mountjoy via CnC-List wrote:I just tried their website. No luck. I ordered an oil cooler from Scott Marine Power. They're in Florida. Price seem
I, too, recommend stainless outfitters. Replacing the original teak handrails, They made new, stainless rails and they were very reasonable. Call John.Fair Winds,Pete W.Siren Song‘90 C&C30-2Sent from my iPadOn Jun 28, 2024, at 2:44 PM, Richard Bush via CnC-List wrote:Photos? ThanksRichard1085
19 matches
Mail list logo
