Re: Stus-List C&C 35 about to be scrapped in Pensacola, FL

Can this boat be saved On Wed, Jul 1, 2020 at 11:18 PM Lee Youngblood via CnC-List < cnc-list@cnc-list.com> wrote: > Hi Dennis or Paul, > > Can someone please take a few PICTURES of the poor 35-II to be scrapped, > and not just debate about a stripe/star? Info please? > > Yea, I have a 35-II,and

Re: Stus-List C&C 35 about to be scrapped in Pensacola, FL

As time goes on there will likely be a sad parade of boats to the breaker’s yard that would have been repaired in past years. Only so many people want to spend $30,000 to create a boat worth $12,000 on a good day. I actually think about this, if I ever sold my boat I am not sure I could stand w

Re: Stus-List C&C 35 about to be scrapped in Pensacola, FL

We local ad for a C & C 30 being given away to a deserving recipient. Ended up in a good home. If I did not have kids…that’s what I would do David F. Risch (401) 419-4650 From: CnC-List On Behalf Of Della Barba, Joe via CnC-List Sent: Thursday, July 2, 2020 9:19 AM To: cnc-list@cnc-list.com

Stus-List Seized SS Screw

A fellow sailor, who is also a machinist, lent me his Snap On Impact Driver...it got the seized SS screw out.  In order to remove the stanchion from the base, I will have to remove the stanchion base from the deck and he will take it to his shop (basement in this case) to separate them and stra

Stus-List Seized SS Screw

A fellow sailor, who is also a machinist, lent me his Snap On Impact Driver...it got the seized SS screw out.  In order to remove the stanchion from the base, I will have to remove the stanchion base from the deck and he will take it to his shop (basement in this case) to separate them and stra

Re: Stus-List Seized SS Screw

Make sure to seal the threads FULLY with loctite or antiseize (choose your antiseize wisely here..) when reassembling. Also be sure the new screws are 316ss, lots of poor quality 'stainless' hardware out there. Go to your local ace hardware or similar, 18-8 is not suitable in a marine environment

Stus-List Seized SS Screw

A fellow sailor, who is also a machinist, lent me his Snap On Impact Driver...it got the seized SS screw out.  In order to remove the stanchion from the base, I will have to remove the stanchion base from the deck and he will take it to his shop (basement in this case) to separate them and st

Re: Stus-List C&C 35 about to be scrapped in Pensacola, FL

The unfortunate reality is that boats are expensive to maintain. Allow the maintenance and repairs to stack up and pretty soon those expenses exceed the book value of the boat. FWIW, there is a neglected Tartan 3700 from 1974 in Solomons which is currently free to a good home. I'm confident that

Stus-List Seized SS Screw

A fellow sailor, who is also a machinist, lent me his Snap On Impact Driver...it got the seized SS screw out.  In order to remove the stanchion from the base, I will have to remove the stanchion base from the deck and he will take it to his shop (basement in this case) to separate them and st

Stus-List Cabinetry Parts - Fiddle Castings

I just noticed an ad for www.WhitecapIndustries.net And the have a picture that looks very much like this Fiddle Casting. Bill Coleman Well, here's a situation where I should have asked the question first. Took the fiddle castings, shown in a picture, to a local powder coating s

Re: Stus-List C&C 35 about to be scrapped in Pensacola, FL

Well there ya’go! A fellow here at our club had a Nelson/Marek 50’ racer whose time had come and gone, and after years of trying to sell it and paying ever increasing storage fees did just that! On a calm day, he took it down to Buffalo to a Broker, and somehow ended up in Canadian waters, co-

Re: Stus-List C&C 35 about to be scrapped in Pensacola, FL

What a coincidence that he had another boat with him on that calm day, being so far off course and all. From: CnC-List On Behalf Of Bill Coleman via CnC-List Sent: Thursday, July 02, 2020 1:46 PM To: cnc-list@cnc-list.com Cc: Bill Coleman Subject: Re: Stus-List C&C 35 about to be scrapped i

Re: Stus-List 35 MK III leak from Propeller log or strut

This may be helpful, it shows how the strut is bedded right into the hull. It took several hours to carefully chip away all the fairing bog. Once it was unearthed, it came off cleanly. https://i.imgur.com/25d8P0v.jpg Jim Watts Paradigm Shift C&C 35 Mk III Victoria, BC On Sun, 28 Jun 2020 at 13:

Re: Stus-List C&C 35 about to be scrapped in Pensacola, FL

Amd the insurance company let that one go without an investigation?] Sent from my Android. Please forgive typos. Thank you. From: CnC-List on behalf of Bill Coleman via CnC-List Sent: Thursday, July 2, 2020 1:45:31 PM To: cnc-list@cnc-list.com Cc: Bill Coleman Subject: Re: Stus-List C&C 35 a

Re: Stus-List C&C 35 about to be scrapped in Pensacola, FL

Champosa.jpg What a coincidence that he had another boat with him on that calm day, being so far off course and all. From: CnC-List On Behalf Of Bill Coleman via CnC-List Sent: Thursday, July 02, 2020 1:46 PM To: cnc-list@cnc-list.com Cc: Bill Coleman Subject: Re: Stus-List C&C 35 about to

Re: Stus-List Marine Fork Lift vs Travel Lift - C&C 34+ ?

This thread reminded me that I just had to have my powerboat lifted onto a trailer and the boatyard had a new forklift and used straps attached to the forks. One way of doing it I suppose. Perhaps your yard can do something like this. https://photos.google.com/photo/AF1QipMYcfJir3uOHBS6Ini_IakC

Re: Stus-List Seized SS Screw

Rob, Be careful about pulling the stanchions out of the aluminum bases. Hopefully yours will slip right out. ALL of my S.S. stanchions were fundamentally welded to the cast aluminum bases. I spent may hours/days soaking in solvents and heating. Wash, rinse, repeat. Did not loosen them one bit.

Re: Stus-List Seized SS Screw

I've had success with penetrating oil applied over a few days. After the second day a used a pipe wrench to rotate the stanchion a micro turn one way then the other way (while applying even more penetrating oil).   On the third day it popped out no problem. Bill Bruce Landfall 3

Re: Stus-List Seized SS Screw

Wish I had talked to you…. ;-) Regards, Dave Godwin 1982 C&C 37 - Ronin Reedville - Chesapeake Bay Ronin’s Overdue Refit > On Jul 2, 2020, at 4:41 PM, billbr...@ns.sympatico.ca wrote: > > I've had success with penetrating oil applied over a few days. After the

Stus-List A Cooler Enterprise

Listers, Just want to finally thank everyone for the advice regarding location, settings and more for the plan to install air conditioning in the Enterprise. Aside from a few tweaks, the work was completed yesterday (Stardate 12049.7). If your curious about the process and how the install lo

Re: Stus-List A Cooler Enterprise

Edd...loved the explanation. Would have rather you installed in nyc. I could have tested the system out for you.Stay safeJim Schwartz SEA YA!38 landfall  Sent from my Verizon, Samsung Galaxy smartphone Original message From: Edd Schillay via CnC-List Date: 7/2/20 8:44 PM (GMT-