As a new owner of a 34 (38 years old) I want to try to create a 3D file of the
boat . . . . .
Does anyone out there have anything already that is close to a C&C 34 . . . . ?
I can manipulate a different boat if anyone has one that is similar . . . .
I'm using a Program called MicroStation, but I
In cleaning out the lazarette recently, I discovered a couple of items that may
be useful to the listers here.
I have an aluminum radar reflector [approx. diameter = 12.5", and in very good
condition] and a I have a new, still-in-the-box VETUS water-lock exhaust
[approx. 8 1/4" H, 4 1/2" W, 14
I would be interested in the reflecter. Is it the round type?
Doug Mountjoy Rebecca Leah LF39 Port Orchard YC, WA.
Original message From: kelly petew via CnC-List
Date: 9/5/18 08:23 (GMT-08:00) To: cnc-list
Cc: kelly petew Subject: Stus-List
Donate to Stu's List - Get
Rob,
There are easier and faster ways to do this - but if you come up dry and
want to try to make a 3D model of YOUR boat, and you were able to take
pictures from numerous angles (while out of the water, perhaps - a drone
might be a good way to do this) I'd be happy to run it through a
photogramme
Pete, I am interested in the reflector. Is it the round type?
ThanksDoug
Doug Mountjoy Rebecca Leah LF39 Port Orchard YC, WA.
Original message From: kelly petew via CnC-List
Date: 9/5/18 08:23 (GMT-08:00) To: cnc-list
Cc: kelly petew Subject: Stus-List
Donate to Stu's L
I have A DXF of mine, I can send you. You could scale it down, but not sure
how much of it you could use. But I added all the rigging, sails, etc.
A Friend of mine who taught 3D Modeling and Printing created the hull from
my line drawings. Think he used Pro Engineer, Wildfire.
Another Possibilit
I noticed the turning block at the deck for the main halyard is seized. It
looks to be original and is mounted in a cut out of the mast track on
centerline of the mast. Are there any ways to service this item or
recommended replacement? I plan to remove it and inspect this weekend.
I have a 197
There being no seemingly other event schedule, how's this?
Friday 4-7 Arrivals, cocktails, meet & greet on pier, pot luck food
Saturday 1-5 Boat tours, cocktails
5 ish Dinner ashore at McGarvey's (2-3 minute walk walking
distance from City Dock)
Sunday Boats depart
Alternative
There is the option of taking the water taxi from City Dock over to Chart
House, then a couple minute walk to APS or the Boatyard.
For those who like or need running rigging, APS has a crazy good
selection. Dennis, any chance we can get boat show pricing there?
Fawcetts is a 10 minute drive from
Do it look like this?
https://drive.google.com/open?id=0B_sb5TfIENvsTzNGazZZampHX00
Dennis C.
Touche' 35-1 #83
Mandeville, LA
On Wed, Sep 5, 2018 at 11:54 AM Bailey White via CnC-List <
cnc-list@cnc-list.com> wrote:
> I noticed the turning block at the deck for the main halyard is seized.
> It
When again is the event?
Neil Andersen
20691 Jamieson Rd
Rock Hall, MD 21661
From: 30131475700n behalf of
Sent: Wednesday, September 5, 2018 1:57 PM
To: cnc-list
Cc: Joel Aronson
Subject: Re: Stus-List Annapolis C&C Rendezvous event schedule
There is the option o
Looks good by me.
As for pot luck, I have a Pro-Select pressure cooker and have reached out
to Brian Fry who also has one. Brian is giving consideration to pot luck
contributions. I'm intending to demo the pressure cooker by doing a
chicken burrito bowl recipe and maybe a pulled pork (or chicken
Neil,
Last weekend of October
Josh
On Wed, Sep 5, 2018, 2:12 PM Neil Andersen via CnC-List <
cnc-list@cnc-list.com> wrote:
> When again is the event?
>
> Neil Andersen
> 20691 Jamieson Rd
> Rock Hall, MD 21661
>
> --
> *From:* 30131475700n behalf of
> *Sent:* Wednesda
Hey Everyone,
I have a small problem, hoping someone has seen before. I recently had a piece
of equipment break or fail at the top of my mast. I am pretty sure it was used
to hold the genoa halyard (which is half wire - half rope) against the mast so
that it would not interfere with the rolling
If you have a Harken system, they make a fitting just for this purpose. Not
sure if they call it a fairlead or something else. Even if your system is not
Harken, their fitting will probably work.
From: Wade Harrogate via CnC-List
Sent: Wednesday, September 05, 2018 2:27 PM
To: cnc-list@cnc-l
This it?
https://www.mauriprosailing.com/us/product/HAR945.html
Dennis C.
Touche' 35-1 #83
Mandeville, LA
On Wed, Sep 5, 2018 at 1:28 PM Wade Harrogate via CnC-List <
cnc-list@cnc-list.com> wrote:
> Hey Everyone,
> I have a small problem, hoping someone has seen before. I recently had a
> piece
I could not make that fit - how did you bend the input tube?
Gary
'80
From: CnC-List On Behalf Of Aaron Rouhi via
CnC-List
Sent: Tuesday, September 4, 2018 4:44 PM
To: cnc-list@cnc-list.com
Cc: Aaron Rouhi ; Steve Guiney
Subject: Re: Stus-List C&C 30' mk1 replacement fuel tank
Years bac
I can't figure out how to respond to a specific posting . . . .
Cheers,
Rob Ball
Chief Design Engineer Tel 508-995-9711
Edson International
Email: r...@edsonintl.com
-Original Message-
From: CnC-List On
hit reply and trim as necessary.
Congrats on the 34! Nice work!
Joel
On Wed, Sep 5, 2018 at 2:45 PM Rob Ball via CnC-List
wrote:
> I can't figure out how to respond to a specific posting . . . .
>
>
>
>
> Cheers,
> Rob Ball
> Chief Design Engineer Tel 508-9
AND change the subject line — replying to digest posts is a no-no!!!
— Fred
Fred Street -- Minneapolis
S/V Oceanis (1979 C&C Landfall 38) -- Bayfield, WI
> On Sep 5, 2018, at 1:47 PM, Joel Aronson via CnC-List
> wrote:
>
> hit reply and trim as necessary.
> Congrats on the 34! Nice work!
>
Halyard restrainer.
Bill Walker
On Wednesday, September 5, 2018 Wade Harrogate via CnC-List
wrote:
Hey Everyone,
I have a small problem, hoping someone has seen before. I recently had a piece
of equipment break or fail at the top of my mast. I am pretty sure it was used
to hold the genoa
Was that one of your designs?
I had one, but now have a 42 Custom. Similar shape below the water line. They
both sail more competitively off the wind.
From: Rob Ball via CnC-List
Sent: Wednesday, September 05, 2018 11:20 AM
To: cnc-list@cnc-list.com
Cc: Rob Ball
Subject: Stus-List 3D File
https://www.fillernecksupply.com/1-1-2-id-38mm-90-degree-super-fuel-filler-elbow-1.50/
Dennis C.
On Wed, Sep 5, 2018 at 1:41 PM Gary Nylander via CnC-List <
cnc-list@cnc-list.com> wrote:
> I could not make that fit – how did you bend the input tube?
>
> Gary
>
>
>
___
Dennis, thank you. Mine is not made for wire and I believe the flanges are
bent back to match the trailing edge of the mast.
On Wed, Sep 5, 2018 at 12:53 PM Bailey White wrote:
> I noticed the turning block at the deck for the main halyard is seized.
> It looks to be original and is mounted in
If the Harken Halyard restrainer is too expensive and/or bulky for your
forestay/mast angle, you can mount as simple bale to the mast that will work as
well.
Charlie Nelson
Water Phantom
C&C 36 XL/kcb
cenel...@aol.com
-Original Message-
From: Wade Harrogate via CnC-List
To: cnc
I found that one – by the time you placed it over the Moeller vertical molded
in tube, there was not enough room – maybe my shelf is a bit higher than his?
Beats me, but I’m done.
Gary
From: CnC-List On Behalf Of Dennis C. via
CnC-List
Sent: Wednesday, September 5, 2018 3:05 PM
To: CnC
Did you cut the hose to get the best fit?
Joe
From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of Gary
Nylander via CnC-List
Sent: Wednesday, September 05, 2018 4:08 PM
To: cnc-list@cnc-list.com
Cc: Gary Nylander
Subject: [EXTERNAL] Re: Stus-List C&C 30' mk1 replacement fuel tank
That is a really great store, Dennis, Thanks -
Those filler hose check valves are sweet!
https://www.fillernecksupply.com/1-1-2-id-38mm-90-degree-super-fuel-filler-elbow-1.50/
Dennis C.
On Wed, Sep 5, 2018 at 1:41 PM Gary Nylander via CnC-List
wrote:
I could not make that fit –
Rob,
Please excuse my ignorance, but are you any relationship to the
Rob Ball who designed many of the C&C designs?
Greg
On 9/5/2018 8:20 AM, Rob Ball via
CnC-List wrote:
As a new o
DING DING DINGYou won the prize. Was wondering how long that would
take.
>From my Android
From: CnC-List on behalf of Greg Arnold via
CnC-List
Sent: Wednesday, September 5, 2018 5:25:23 PM
To: cnc-list@cnc-list.com
Cc: Greg Arnold; Rob Ball
Subje
Congrats Rob!Hope to see you on the Bay.
David F. Risch
1981 40-2
Corsair
>From my Android
___
Thanks everyone for supporting this list with your contributions. Each and
every one is greatly appreciated. If you want to support the list - us
Without the halyard restrainer the headsail may not furl and unfurl
properly without wrapping the halyard. Did the whole thing come off or
just the sheave and pin? The pin is just held in by cotter pins and if
they wear/fall out then the pin can work free and drop the sheave. Here
are a few pict
Schafer makes a halyard restrained.
https://www.westmarine.com/buy/schaefer--halyard-restrainer-bracket--285538
Doug Mountjoy Rebecca Leah LF39 Port Orchard YC, WA.
Original message From: Wade Harrogate via CnC-List
Date: 9/5/18 11:27 (GMT-08:00) To:
cnc-list@cnc-list.com
Rob Ball is on the list serv! Cue the Wayne's World clip... we're not worthy!
we're not worthy!
Seriously, welcome. Can't help with the file 'tho. I'd thought about doing
it, but couldn't figure out the benefit other than the intellectual exercise in
doing it (which is fine as a reason, do
34 matches
Mail list logo
