Help! Lost the feeder on headfoil off the mark iii harken furler Sunday after a
race. Part # 962. Can't find a dealer who stocks. Not pre feeder, but part
that goes on extrusion. Several emails out to dealers.
Bill Walker
CnC 36
Pentwater, Mi.
Bill Walker
Help! Lost the feeder on headfoil off the mark iii harken furler Sunday
> after a race. Part # 962. Can't find a dealer who stocks. Not pre
> feeder, but part that goes on extrusion. Several emails out to dealers.
> Bill Walker
> CnC 36
> Pentwater, Mi.
>
> Bill Walker
>
Give these guys a call:
I feel your pain. I am so petrified of losing mine I keep a spare.
Try some rigging shops or consignment shops.
In my area, it's Zern Rigging 850.261.4129 r...@zernrigging.com
or Southern Cross 850.377.1776 or i...@southerncrossmarineservices.com
Also try Stix n Rig'n in Kemah, TX
or boaters
Bill,
I show the feeder for a Harken MKIII Unit 1 as part 812. Is this same as
yours?
The fastener shows as Harken 192.
Mauripro lists it.
https://www.mauriprosailing.com/us/product/XZHAR812.html
Fisheries Supplies says ships in 10-12 days.
I recently bought a trim cap for my unit from apslt
On Tuesday, August 28, 2018 Dennis C. via CnC-List
wrote:
Bill,
I show the feeder for a Harken MKIII Unit 1 as part 812. Is this same as yours?
The fastener shows as Harken 192.
Mauripro lists it.
https://www.mauriprosailing.com/us/product/XZHAR812.html
Fisheries Supplies says ships in 1
For a 36 you probably have a Unit 1, possibly a Unit 1.5.
MKIII's have a black metal cover surrounding the drum, screws to hold the
extrusions together.
Did you call Harken directly? Excellent customer support from my
experience.
Dennis C.
On Tue, Aug 28, 2018 at 10:37 AM WILLIAM WALKER via Cn
Bill,Try port Townsend Rigging+1-360-385-6330They might have one laying around.
Doug Mountjoy Rebecca Leah LF39 Port Orchard YC, WA.
Original message From: WILLIAM WALKER via CnC-List
Date: 8/28/18 07:37 (GMT-08:00) To:
cnc-list@cnc-list.com Cc: WILLIAM WALKER Subject: St
Does anyone have a DIY solution for a screen to fit a Lewmar inside opening
port? Delivering a boat with 12 X 5 or 6 inch ports. Len
Sent from my mobile device.
___
Thanks everyone for supporting this list with your contributions. Each and
every one
Thanks to everyone. Called Harken and determined that my furler was Mark III,
unit 1 as Dennis suspected. 7.5 inch drum. Feeder is Part #812, again as Dennis
said.
Found at Fawcett Marine for $80 and free shipping.
Thanks to all..wish harken had a better design on this...
Never try to remove a
Hi Bill
When we are switching from Race to cruise and vice versa I always have to
remove the feeder to raise or lower the collar. Is a major PITA for just the
reason you describe. I ONLY do this at my slip where at least a diver could
locate the part should it go overboard. I also purchased
Final thought, ordered at about 2:30, Fawcett Marine shipped by 4, arriving
from east coast to.michigam Thursday...what a world we live in.
Bill Walker
On Tuesday, August 28, 2018 WILLIAM WALKER via CnC-List
wrote:
Help! Lost the feeder on headfoil off the mark iii harken furler Sunday after
You just looking for something temporary?
How about this?:
https://www.lowes.com/pd/Frost-King-Common-15-in-x-24-in-x-0-1875-in-Actual-15-in-x-24-in-x-Washable-Cut-To-Fit-Air-Filter/1196229
Cut to fit. Will still pass air but not bugs.
BTW, it's what I use for the intake filter for Touche's Cr
I’m a regular customer at Fawcett’s. They are awesome!
Joel
On Tue, Aug 28, 2018 at 5:33 PM WILLIAM WALKER via CnC-List <
cnc-list@cnc-list.com> wrote:
> Final thought, ordered at about 2:30, Fawcett Marine shipped by 4,
> arriving from east coast to.michigam Thursday...what a world we live in.
I just turned 35 and have been living on my 36' for two years:)
Curious to hear how well the 3d printed material holds up in the marine
environment. Looks great!
On Wed, Aug 15, 2018 at 8:00 AM, Bill Coleman via CnC-List <
cnc-list@cnc-list.com> wrote:
> Holy Crap, a C&C owner under 60!
>
>
>
>
14 matches
Mail list logo
