Listers,
Quick question to all the 35-3 owners. Does anyone have a Rocna anchor and if
so does the standard Rocna fit or do I need the Vulcan to fit that anchor
roller weldment? Thanks for the help.
P.S. I’m not looking to get into the anchor debate I did a bunch of research
none are perfect
No debate here. Everyone knows that CQRs belong in the smelter. No information
on your problem though.
Mike
PERSUASION
C&C 37 K/CB
Long Sault
> On Apr 29, 2018, at 1:35 PM, Brien Sadler via CnC-List
> wrote:
>
>
> Listers,
>
> Quick question to all the 35-3 owners. Does anyone have a Rocna
Brien,
I'm a Danforth user. Not sure how well the Rocna would fit.
Jake
Jake Brodersen
C&C 35 Mk-III “Midnight Mistress”
Hampton VA
-Original Message-
From: CnC-List On Behalf Of Brien Sadler via
CnC-List
Sent: Sunday, April 29, 2018 13:35
To: cnc-list@cnc-list.com
Cc: Brien Sadle
Anchor weldment? What anchor weldment???
Mine came with a clean bow. I bolted on a Garhauer roller, and I'm
running a Rocna 15 in it.
Before I went too far I traced one, cut it out in plywood, and played
with it to be sure I'd be OK with the fit. Or find someone local with
one and borrow it
Hello Everybody,
I have an old Raycor 200FG that takes replacement cartridges from the top
on my Yanmar 2 GMF.
The bottom clean out valve is frozen and the hose fittings need attention.
This model has been replaced with newer screw on from the bottom styles.
Wondering what experiences owners ha
Hello All,
Down at the boat today and noticed that one of the locking handles on my
forward hatch is cracked and not holding well. I believe it is a Lewmar hatch,
but I don’t find a replacement handle that look
https://www.lewmar.com/sites/default/files/Hatch%20Identification.pdf
Dennis C.
On Sun, Apr 29, 2018 at 8:38 PM, Jim Reinardy via CnC-List <
cnc-list@cnc-list.com> wrote:
> Hello All,
>
> Down at the boat today and noticed that one of the locking handles on my
> forward hatch is cracked and not
The replacement cartridge filters are reasonably convenient. But before you
switch, check the prices; some of these cartridges are quite expensive.
I used to have the 220 model. It has a very useful hand pump that helps in
re-priming the fuel line. But…, that pump started leaking (and the replac
I just replaced mine. If they are the same you are welcome to one of my
old parts. They are pretty cheap to buy new. The failure mechanism on
mine was that the center stem pulled out of the mushroom cap.
This is what I replaced:
https://hatchmasters.com/product/lewmar-mushroom-handle-caps/
Thi
Josh,
What went on mine was the tab on the interior handle on the left side. If you
have that as surplus, I would gladly take it off your hands!
Jim
Get Outlook for iOS
BTW, based on the helpful link Dennis sent, I believe it is a
Rollstop. The Ocean handles would appear to fit, though they look slightly
different. Sounds like Josh was able to get it work with his.
Jim
The light is great when sailing at night.
Yes I have the tack tick but being able to see your masthead fly is nice.
I ended up buying a new windex and light on Defender.
It seems I had an old version of a Davis 15.
Thanks for the link, amazing to see I could have gotten a bracket, but the
uprig
I'm a big fan of the 200FG. I've completely rebuilt mine with all new
o-rings and I have plenty of the cost effective cartridges. Despite being
discontinued the cartridges are still extremely available. I modified mine
with a vacuum gauge and a vent/bleed valve. As for your stuck drain valve,
m
13 matches
Mail list logo
