Re: Stus-List AERIAL conflict?

2018-04-10 Thread Della Barba, Joe via CnC-List
Two issues: 1. RF interference: Does the signal from one radio degrade the operation of the other radio? 2. Antenna detuning: Does one antenna interact with the near-field RF to detune the other antenna? Starting with 2, if you mount a vertical antenna at the same level as the VHF

Stus-List Sealant for chainplates.

2018-04-10 Thread Glen Eddie via CnC-List
Can someone with a 35 mkI or II let me know the sealant used at the deck when rebedding a chainplate. 4000? Your assistance is much appreciated. Glen Eddie Tel: 416-777-5357 Fax: 1-888-812-2557 ged...@torkinmanes.com VCard

Re: Stus-List Sealant for chainplates.

2018-04-10 Thread Dennis C. via CnC-List
I just re-bedded Touche's chain plates with Bed-It butyl tape. http://www.pbase.com/mainecruising/butyl_tape Dennis C. Touche' 35-1 #83 Mandeville, LA On Tue, Apr 10, 2018 at 7:18 AM, Glen Eddie via CnC-List < cnc-list@cnc-list.com> wrote: > Can someone with a 35 mkI or II let me know the seala

Re: Stus-List Solar day/night fans - things you need to know

2018-04-10 Thread Dennis C. via CnC-List
Rick, You went into a lot more detail. Good job. Your post was better at explaining what I had seen about the 20803 vs the 20703 and the fitment issues with the 20803. Both have fairly vertical sides for catching lines. By "new" Nicro, I meant the 20703 as opposed to the old Nicro that's been

Re: Stus-List Sealant for chainplates.

2018-04-10 Thread Glenn Gambel via CnC-List
I rebedded Wind N Spirits chainplates with 4000. Worked great and no more leaking. -- Original Message -- From: "Glen Eddie via CnC-List" To: "cnc-list@cnc-list.com" Cc: "Glen Eddie" Sent: 4/10/2018 8:18:32 AM Subject: Stus-List Sealant for chainplates. Can someone with a 35 mkI or

Re: Stus-List Sealant for chainplates.

2018-04-10 Thread Mark McMenamy via CnC-List
I second the butyl tape. I've found it to be the best long term solution. But make sure to get the stuff from Compass Marine. Mark McMenamy C&C 25 Icicle On Apr 10, 2018, at 9:23 AM, Glenn Gambel via CnC-List mailto:cnc-list@cnc-list.com>> wrote: I rebedded Wind N Spirits chainplates with 4

Re: Stus-List Sealant for chainplates.

2018-04-10 Thread Nauset Beach via CnC-List
I have to do the same thing, again. Used Lifecaulk in August, 2015 and noticed last month one chainplate was damp, and the boat is still under its winter cover. The Maine Sail tape seems to be the favorite bedding material of the list. What is the “life expectancy” of a chainplate seal u

Re: Stus-List Sealant for chainplates.

2018-04-10 Thread Neil E. Andersen via CnC-List
Glen, Check out this video on YouTube. It is for an Island Packet, but covers the process quite well. https://www.youtube.com/watch?v=4L-hf5607AI &t=6s Sincerely, Neil Andersen - Broker Office: 410 571-3605 or 410-639-2777 C

Re: Stus-List Sealant for chainplates.

2018-04-10 Thread Dennis C. via CnC-List
In my opinion, the issue with many sealants is they "cure" or set. So a polyurethane or silicone sets and becomes less flexible. Further, many of those sealants do not adhere tenaciously to metal. Butyl tape, on the other hand, remains sticky and pliable for a long, long time. That means it wil

Re: Stus-List Sealant for chainplates.

2018-04-10 Thread Schiller via CnC-List
I wish I would have discovered butyl years ago. I traditionally used life caulk and redid it when it looked like it needed. My advice to C&C35-1 owners is to remove the teak cover off the cabin side of the upper shroud chain plate to look for leakage. Neil Schiller 1983 C&C 35-3, #28 “Grace”

Re: Stus-List Sealant for chainplates.

2018-04-10 Thread Ed Dooley via CnC-List
What about Polyethers? Flexible, adheres to plastics (3M 4000UV does anyway). Here’s what West Marine says about them: Polyether: One of the most exposure resistant sealants, unaffected by teak oils or cleaners, permanently flexible, and sandable. West Marine Multi-Caulk is an excellent choice f

Stus-List IPad Upgrade

2018-04-10 Thread Sam Salter via CnC-List
It’s about time to upgrade my iPad from the original model - nothing much works anymore! I originally bought it, way back, to run iNavX using the internal GPS alone, independent of cell towers. Since the original model’s GPS was configured differently than current models, can someone confirm tha

Re: Stus-List IPad Upgrade

2018-04-10 Thread Joel Aronson via CnC-List
Sam, That's right. The cell antenna is also the GPS antenna. Or you can buy a separate GPS dongle. I just upgraded from a 3 to an Air 2. Big difference in performance! Joel On Tue, Apr 10, 2018 at 1:35 PM, Sam Salter via CnC-List < cnc-list@cnc-list.com> wrote: > It’s about time to upgrade m

Re: Stus-List IPad Upgrade

2018-04-10 Thread Sam Salter via CnC-List
Thanks Joel - time to open my wallet! Sam > On Apr 10, 2018, at 11:39 AM, Joel Aronson via CnC-List > wrote: > > Sam, > > That's right. The cell antenna is also the GPS antenna. Or you can buy a > separate GPS dongle. > I just upgraded from a 3 to an Air 2. Big difference in performance!

Re: Stus-List IPad Upgrade

2018-04-10 Thread John Conklin via CnC-List
running Navionics ? John Conklin On Apr 10, 2018, at 1:39 PM, Joel Aronson via CnC-List mailto:cnc-list@cnc-list.com>> wrote: Sam, That's right. The cell antenna is also the GPS antenna. Or you can buy a separate GPS dongle. I just upgraded from a 3 to an Air 2. Big difference in performa

Re: Stus-List IPad Upgrade

2018-04-10 Thread Sam Salter via CnC-List
I assumed I would carry on with iNavX! Not really thought about changing. sam > On Apr 10, 2018, at 12:09 PM, John Conklin via CnC-List > wrote: > > running Navionics ? > > John Conklin > > > On Apr 10, 2018, at 1:39 PM, Joel Aronson via CnC-List > wrote: > >> Sam, >> >> That's right.

Re: Stus-List Solar day/night fans - things you need to know

2018-04-10 Thread Rick Brass via CnC-List
I had installed two of the 20703 fans on the top of my dorade boxes (as replacements for the cowl vents that kept jumping overboard). The diameter of the fans overhung the sides of the dorade boxes a bit, and both were snagged and destroyed by flogging sheets during my  voyage to Bermuda last year.

Stus-List Raymarine Product Testing

2018-04-10 Thread ALAN BERGEN via CnC-List
I found this on the Raymarine web site, for anyone who might be interested: Would you like to become a Raymarine Product Tester? If you own an Axiom, eS or gS MFD, you can apply to become a Raymarine Product Tester which will enable you to influence new features which you will be able to preview

Re: Stus-List Sealant for chain plates.

2018-04-10 Thread John and Maryann Read via CnC-List
Butyl it is and never look back. Had similar issues of leakage and redid all chain plates with butyl and nary a drop since then. Biggest issue is the movement of the chain plate through the deck. When you apply the sealant everything is at rest. When the shrouds are torqued to spec, there i

Re: Stus-List IPad Upgrade

2018-04-10 Thread Paul Fountain via CnC-List
Or get a bad elf gps for lightening connector Paul From: CnC-List on behalf of Sam Salter via CnC-List Sent: Tuesday, April 10, 2018 1:51:07 PM To: cnc-list@cnc-list.com Cc: Sam Salter Subject: Re: Stus-List IPad Upgrade Thanks Joel - time to open my walle

Re: Stus-List Sealant for chain plates.

2018-04-10 Thread Gary Russell via CnC-List
I agree with all who recommend butyl tape. However, they forgot a few additional benefits. !. It's the product used by C&C when they built our boats. 2. It's removable. 3 It's less expensive than all the other sealants. 4. A roll will last you for years. Gary S/V Kaylarah '90 C&C 37+ East Gree

Stus-List iPad upgrade

2018-04-10 Thread Tom Buscaglia via CnC-List
There is also a nifty Dual Bluetooth GPS puck that’s pretty sweet too. http://www.mypilotstore.com/MyPilotStore/sep/8364?gclid=EAIaIQobChMI3M-WroCx2gIVD7jACh32tgzzEAQYASABEgJiXPD_BwE Much better than the built in GOS capability. Also eliminated the need for wireless cell chip. Tom B Typoed fr

Re: Stus-List IPad Upgrade

2018-04-10 Thread Kevin Benoit via CnC-List
The Navionics app works well on my IPad Pro w cell data. Also flawless using only GPS antenna but only for charting, the marina and attraction guides obviously don’t work. On Tue, Apr 10, 2018 at 7:20 PM Paul Fountain via CnC-List < cnc-list@cnc-list.com> wrote: > Or get a bad elf gps for light

Stus-List Mast step stringers

2018-04-10 Thread Brian Fry via CnC-List
1993 37/40. Redoing the rod rigging, mast is down. Removed the aluminum mast step to media blast and powder coat. There are three `stringers` the mast step sits on. The forward and aft stringers,which the step is bolted to, are bulging. Tapping on them reveals a delamination inside. I am thinking t