Re: Stus-List B&G instruments

I sold a working set of these in for $150 Mike Persistence From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of Alex Giannelia via CnC-List Sent: Saturday, March 31, 2018 12:06 PM To: cnc-list@cnc-list.com Cc: Alex Giannelia Subject: Stus-List B&G instruments Hello Someone at ou

Re: Stus-List B&G instruments

They actually have some value according to my electronics guy. Andrew Burton 61 W Narragansett Newport, RI USA02840 http://sites.google.com/site/andrewburtonyachtservices/ +401 965-5260 > On Apr 2, 2018, at 08:19, Hoyt, Mike via CnC-List > wrote: > > I sold a working set of these in fo

Re: Stus-List B&G instruments

I have bought and sold these, I think for around a hundred bucks per. Bill Coleman C&C 39 Erie, PA From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of Hoyt, Mike via CnC-List Sent: Monday, April 02, 2018 8:19 AM To: cnc-list@cnc-list.com Cc: Hoyt, Mike Subject: Re: Stus-List

Re: Stus-List SHARX™ SCREWS FOR MARINE USE

Ok, I think I'm going to go with the Bronze Silicon screws given the the very moist environment.  I am actively trying to chase down all the sources of water in the bilge but, until then...  As I understand it, SS doesn't really like like an environment that could be wet with little oxygen and

Re: Stus-List SHARX™ SCREWS FOR MARINE USE

Danny, Call me after the salon and before you jump on the mustang. I'll join you for poker and whiskey... How is paint-job-parte-deux going? From: CnC-List on behalf of Danny Haughey via CnC-List Sent: Monday, April 2, 2018 10:41 AM To: cnc-list@cnc-li

Re: Stus-List SHARX™ SCREWS FOR MARINE USE

LOL,  I will happily ride on by your spread on my way into town! I have to say, I'm very impressed so far.  Although there is still a cost to me, the value is going up.  They decided to strip the transom as well at no additional cost and will be re-painting the whole boat rather than just the

Stus-List Fuel Filler hose elbow

Hi ! I have a 1971 C&C 35 Mk1 with an atomic 4 engine, lying Etobicoke, (near Toronto).  The gas fill hose disintegrated so I am replacing (with much swearing). The most challenging part is to find a replacement for the elbow that makes the 90 degree turn from the fill hose into the tank. The ex

Re: Stus-List Fuel Filler hose elbow

Have you tried this site? https://www.fillernecksupply.com/fuel-hose-elbows/ Morgan Ellis SV Meandher 30-2 On Mon, Apr 2, 2018, 12:04 TL ROSS via CnC-List, wrote: > Hi ! I have a 1971 C&C 35 Mk1 with an atomic 4 engine, lying Etobicoke, > (near Toronto). The gas fill hose disintegrated so I am

Re: Stus-List Fuel Filler hose elbow

 Yes I have now - I had seen it but was just hesitating to see if i could find an exact replacement here (and maybe save on shipping). But someone else mentioned it on the forum so I've gone through with it now.  Thanks! Tracy Ross oo...@yahoo.ca   On Monday, April 2, 2018, 12:34:47 p.m

Re: Stus-List Fuel Filler hose elbow

Tracy, Please, let us know what item you purchased and how it worked. I've been eyeing the filler neck site also but don't need to replace now. Dennis C. Touche' 35-1 #83 Mandeville, LA On Mon, Apr 2, 2018 at 11:39 AM, TL ROSS via CnC-List wrote: > Yes I have now - I had seen it but was just

Stus-List Spreaders

I have the mast down and have noticed a different angle on my starboard spreaders compared to the port. A few questions: Does anyone know the brand used in the 37/40? How do you remove the spreader base which goes.through the mast? La Neige 1993 37/40 xl Brian Fry _

Re: Stus-List Spreaders

The 37/40 XL mast is an Offshore Spars mast: http://www.offshorespars.com/ Mine come out with a few taps with a soft hammer. Be sure to slide something in in place of each spreader bar as you remove it so the halyards, etc. inside the mast will remain on the correct side of the spreader bar when

Re: Stus-List SHARX™ SCREWS FOR MARINE USE

Hi Danny You are adding it to the edge of the plywood? A nail won't do much there, and it may split the plys apart. I'd just glue it with epoxy. If you really feel the need to make the joint stronger you should get a biscuit joiner. The resulting joint is much stronger, uses a wooden biscui

Re: Stus-List Spreaders

While on this topic I just removed spreader boots to reveal major corrosion on upper starboard spreader ☹ I have a 1982, CnC 37 do I need to get a pair ? where do I get these South Marine? Sent from Mail for Windows 10 ___