I am going to need a new gooseneck. Mine was a single aluminum piece with two
loops. Top one broke off. Boom fitting had an offset set of loops and a single
5/8” stainless pin was holding everything together. Now that the top loop
broke off there is additional load on the bottom. Did anyone
Bill
Do you know where I can find the round black plastic holes used to
activatye the spring loaded latch on the cabin doors. We are adding
cabinets in the place of the old pipe berths in our 1974 39TM and I need 2
of these access holes to complete the project.
I bought several from C&C many ears
Dave,
I have actually used my emergency tiller...what exactly is your question...?
David F. Risch
1981 40-2
(401) 419-4650 (cell)
> Date: Sun, 31 Jul 2016 20:14:10 -0400
> To: cnc-list@cnc-list.com
> Subject: Stus-List Emergency tiller & wrenches. Where? 33-2 and others
> From: cnc-list@cnc-
Dave,
Touche's emergency tiller is snapped into two clips right inside the
starboard cockpit locker. See:
https://drive.google.com/open?id=0B_sb5TfIENvsdWgtQkQ5TDM4cWM
A pair of clips like these would work:
http://www.defender.com/product3.jsp?path=-1|10918|2303301&id=19242
It is immediately
Peter, I just had some aluminum work done on my boom. I took it to Bob at B&B
Welding on W Narragansett and Clinton St in the 5th Ward (right across from my
shop). He should be able to fix it for you fairly quick.
Andy
C&C 40
Peregrine
Andrew Burton
61 W Narragansett
Newport, RI
USA02840
h
Apologies - my post is not at all clear.
I am wondering where others cleverly stow the tiller and its tools.When I
got mine it was buried in the cockpit locker, with rusting wrenches Masking
taped to the arm.
I fastened the wrenches with small cable ties and tied the lot to the straps
wh
Dave:
I just tried my Emergency Tiller last week before the Hook race.
Did not have to remove wheel or helmsman raised seat.
My wrench is taped to the tiller so it is easy to cut or rip off.
Currently it is stored in the battery compartment, but after thinking about
this I think I will move it to
Looks like a great effort by Jeff and a strong finish for the C&C 115! Does
anyone have his email address?
Jim Peterson
Crewing on OPBs
Wellesley, MA
--
Message: 6
Date: Sun, 31 Jul 2016 20:39:02 -0400
From: Jerome Tauber
To: "cnc-list@cnc-list.com"
Subject: Stus-L
This supplier has all those plastic parts. Check catalog.
http://us.essentracomponents.com/en-US/caps-plugs?src=em&utm_source=iContact&utm_medium=email&utm_campaign=1406_rebranding1_us&utm_content=1406_rebranding_us
Sent from my iPhone
> On Jul 31, 2016, at 8:49 PM, Richard Walter via CnC-List
Hi Richard,
Holland Marine out of Mississauga Ontario ( http://www.hollandmarine.com )
has the closest thing (But much better made) to the original plastic
"thinghies". They are made out of brass and have a better spring. I've
used them to replace most of mine, they're solid and look nicer.
I was going to bring it here see if there is a replacement.
http://www.rigrite.com/A-Main/spar_M.html#Spar%20Parts%20by%20Spar%20Manufacturer
He used to be in warwick, not far from where I work, but I can’t find the new
location.
I’ll give B&B welding a call. Thanks.
From: C
Join the club. I just replaced mine, and two friends (34 and Landfall 38)
broke theirs. A friend owns a machine shop, and he made me a new one out
of stainless.
Alan Bergen
35 Mk III Thirsty
Rose City YC
Portland, OR
On Mon, Aug 1, 2016 at 6:06 AM, Petar Horvatic via CnC-List <
cnc-list@cnc-lis
No, but a good place to start would be Rocklers , Woodworkers supply, McMaster
Carr- there is is a lot of that stuff in the woodworking business
Bill Coleman
Original message
From: Jack Fitzgerald via CnC-List
Date: 8/1/16 07:07 (GMT-07:00)
To: C&CList
Cc: Jac
I keep ours in the shallow starboard cockpit locker, it *just* fits.
Wrenches are taped to it.
Jim Watts
Paradigm Shift
C&C 35 Mk III
Victoria, BC
On 1 August 2016 at 06:37, Lee Rosenbaum via CnC-List wrote:
> Dave:
>
> I just tried my Emergency Tiller last week before the Hook race.
> Did not
We broke a fairly new (2nd season) steering cable about 100 miles outside of
Bermuda in 09'. We setting up for a gale when we slid backward with a only
the heavily reefed main up...my guess is the rudder went to its stops, unloaded
the cable (which was recently tightened) and when re-loaded th
A friend of mine moved up to a larger liveaboard and is now selling her
1977 C&C 33. It's in great shape. Located in the San Francisco Bay Area
(specifically Point Richmond).
Here's the listing if anyone's interested or knows someone who might be:
http://sfbay.craigslist.org/eby/boa/5701271536.h
My friend has a sail cover with eyelets on each side in lieu of what I call
twist snaps. He presently uses carabiner clips which take extra time to
attach. My thought was to thread a line from eyelet to eyelet as this would be
much faster. Any ideas would be appreciated.
FrankC&C 29
A loop of rope on one side and a rope with a chineese button knot in it
would work. That way you could just butten it up.
Here's a youtube of the knot:
https://www.youtube.com/watch?v=pQH2FnHoByc
On 8/1/2016 5:58 PM, Franklin Schenk via CnC-List wrote:
My friend has a sail cover with eyelets
http://www.non-ferrousfastener.com/
Great company, great service.___
This list is supported by the generous donations of our members. If you like
what we do, please help us pay for our costs by donating. All Contributions are
greatly appreciated!
Turks head isn't as pretty but it would be faster, easier to make and just
as functional. I only have 1 tie but just use a string to tie a
reef/square knot.
Josh Muckley
S/V Sea Hawk
1989 C&C 37+
Solomons, MD
On Aug 1, 2016 5:17 PM, "Jeffrey Nelson via CnC-List"
wrote:
A loop of rope on one si
Is there a wrench size between 13 and 14 mm?
Joel
--
Joel
301 541 8551
___
This list is supported by the generous donations of our members. If you like
what we do, please help us pay for our costs by donating. All Contributions are
greatly appreci
Derek Hatfield, who in 2003 became the 126th person to sail around the globe
alone, died at the age of 63.
Hatfield "was an inspiration to follow one's dreams and not be deterred despite
what seemed insurmountable challenges."
He achieved what many sailors only dream of, in a world that many Ca
nope...but 1/2 inch and 9/16 would be somewhere in the vacinity if
someone used an imperial bolt instead
of the metric Yanmar uses.
On 8/1/2016 8:10 PM, Joel Aronson via CnC-List wrote:
Is there a wrench size between 13 and 14 mm?
Joel
--
Joel
301 541 8551
___
Joel — 17/32” is equivalent to 13.5mm… :^)
— Fred
Fred Street -- Minneapolis
S/V Oceanis (1979 C&C Landfall 38) -- Bayfield, WI
> On Aug 1, 2016, at 6:10 PM, Joel Aronson via CnC-List
> wrote:
>
> Is there a wrench size between 13 and 14 mm?
>
> Joel
_
I just got a new Stainless fitting from South Shore Yachts.
Nice piece of work.
Suggest that you send them a template of the mast section though. The first one
they sent would not fit.
John
Landfall 38 #234
From: Petar Horvatic [mailto:phorv...@gmail.com]
Sent: Monday, August 01, 2016
Garhauer made me a new one out of stainless. Sent old one to them. Fit great.
Bill Walker
CnC 36
Pentwater, Mi.
I am going to need a new gooseneck. Mine was a single aluminum piece with two
loops. Top one broke off. Boom fitting had an offset set of loops and a single
5/8” stainless pin
The problem is that it started as a 14 and got round it off. Probably need
vice grips.
On Monday, August 1, 2016, Jeffrey Nelson via CnC-List <
cnc-list@cnc-list.com> wrote:
> nope...but 1/2 inch and 9/16 would be somewhere in the vacinity if someone
> used an imperial bolt instead
> of the metri
Joel,
Six point sockets are usually better, as they won’t tend to round the edges of
the bolt/nut. This might be a time for one of those specialty tools.
https://www.craftsman.com/products/craftsman-10-pc-damaged-bolt-nut-remover-set-low-profile-bolt-out
Jake
Jake Brodersen
C&
Jake
thanks.
Joel
On Monday, August 1, 2016, Jake Brodersen via CnC-List <
cnc-list@cnc-list.com> wrote:
> Joel,
>
>
>
> Six point sockets are usually better, as they won’t tend to round the
> edges of the bolt/nut. This might be a time for one of those specialty
> tools.
>
>
>
>
> https://www
Thanks Jeffrey but that looks like a lot of work for me to do on a friends
boat. When I was in High School a teacher said if you are looking for an easy
way to do a job give the task to a lazy guy. LOL
On Monday, August 1, 2016 4:16 PM, Jeffrey Nelson via CnC-List
wrote:
A loop of r
30 matches
Mail list logo
