Hum, putting that back into shape through hammering does not look like an easy
job to me. Also think that hammering will expand the metal in odd directions
too. I would keep consulting with people more knowledgeable on this type of
work.
Antoine
> Le 15 avr. 2017 à 23:29, tom via CnC-List a éc
Dave & Antoine,
What it seems like is that there should be some upward angle but better at
the mast fitting.
So it seems that I'm best checking at the mast to see if there is an angle
at the fitting or not. My spreaders are pictured in the link below trying
to show the bend in them.
Would hammering
Rodney,
Nice pic of the rigging. Somewhat surprised though that you mention all
original never reheaded. I thought the norm was to do this by now.
My spreader pic is linked below, trying to show the angle.
https://www.dropbox.com/sh/dx8rxhya2dyummc/AACODZtg41WU01YI-AxHtfAIa?dl=0
With the 2 tangs
Tom,
My 33-1 spreaders are straight (no bend along length). If they are
upward biased from mast perpendicular I do not remember from the last
time I restepped the mast. Since the outboard spreader end fits into the
rod's "dogbone" (spreader bend) fitting, I go with whatever the factory
angle
Tom.
I'm no rigger but I too have a C&C 33-1. Also, ours is not the original mast so
things are different and I do suggest you discuss this issue with a
professional rigger. I believe the spreader should be angled up as you see on
yours. The trick is to direct the load evenly from the shroud so
Hi Tom,
Yes, the spreader should be upward biased and 10 degrees is the correct angle.
That is to ensure the angle formed between the spreader and the shroud are the
same above and below the spreader.
Now, this angle is usually obtained through the fitting on the mast. I’m
unclear from your post
Stu,
Can the following be posted on the CnC List?
Mast, Turnbuckles and Spreader for C&C 33-1
Hi Everyone,
Having my mast down this season for rigging check and LED lights and wiring
replacement the rod seems to be original as well as the turnbuckles and I
have been advised to replace and not just
Hi Al,
As I mentioned above, our HIN has C090 = March of 1990, 1990 Model Year.
The order for our boat, Hull 67, was placed in late December of 1989, order
confirmed with deposit in January 1990, hoping for completion in April,
1990. It actually went out the factory door on May 15, 1990 with And
shorter course doesn't hurt either.
Allen Miles
C&C 30-2 Septima
Hampton, VA
--
From: "David Miles via CnC-List"
Sent: Thursday, February 11, 2016 11:52 AM
To:
Cc: "David Miles"
Subject: Re: Stus-List Post to list
ZCC40088E394, so built May 93 but a 94 model? Oddly like the auto industry in
the leeway between build dates and model years.
Cheers, Al
> On Feb 11, 2016, at 8:58 AM, Ken Heaton via CnC-List
> wrote:
>
> Very likely finished before the fire. Your full hull number and can tell you
> what
Congrats! I guess I'm not the newest owner on the list anymore.
Sam
C&C 35 mk III
SF
On Thu, Feb 11, 2016 at 8:58 AM, Ken Heaton via CnC-List <
cnc-list@cnc-list.com> wrote:
> Very likely finished before the fire. Your full hull number and can tell
> you what month your build started. The num
Very likely finished before the fire. Your full hull number and can tell
you what month your build started. The number on the transom that starts
ZCC40 something...
Ours is ZCC37067C090 which translates as:
ZCC = the three letter code for C&C Yachts. The first three characters are
a MIC (Manufa
Sent: February-10-16 10:23 PM
To: cnc-list@cnc-list.com
Cc: Alan Liles
Subject: Re: Stus-List Post to list
No, I'm bringing it to Vancouver when I can.
Cheers, Al
> On Feb 10, 2016, at 9:37 PM, Peter Fell via CnC-List
wrote:
>
> Congrats! Beautiful boat.
>
> Going to keep it in
Congrats!
Josh Muckley
S/V Sea Hawk
1989 C&C 37+
Solomons, MD
On Feb 10, 2016 8:10 PM, "Alan Liles via CnC-List"
wrote:
> The deal just closed. I'm the new owner of C&C 37/40+ Elendil out of
> Victoria.
>
> Cheers, Al
>
>
> ___
>
> Email address:
> CnC
-Original Message- From: Alan Liles via CnC-List
> Sent: Wednesday, February 10, 2016 8:12 PM
> To: cnc-list@cnc-list.com
> Cc: Alan Liles
> Subject: Re: Stus-List Post to list
>
> Thanks for the warm welcome.
>
> Cheers, Al
>
>
>> On Feb 10, 201
Congrats! Beautiful boat.
Going to keep it in Sidney?
Peter Fell
Sidney, BC
Cygnet
C&C 27 MkIII
-Original Message-
From: Alan Liles via CnC-List
Sent: Wednesday, February 10, 2016 8:12 PM
To: cnc-list@cnc-list.com
Cc: Alan Liles
Subject: Re: Stus-List Post to list
Thanks for
> On Feb 10, 2016, at 6:00 PM, cnc-list-requ...@cnc-list.com wrote:
>
>
> Message: 6
> Date: Wed, 10 Feb 2016 17:09:49 -0800
> From: Alan Liles
> To: cnc-list@cnc-list.com
> Subject: Stus-List Post to list
> Message-ID: <9371b0b2-9ee8-4442-93b7-3ee6f9244...
Thanks for the warm welcome.
Cheers, Al
> On Feb 10, 2016, at 7:50 PM, Tracy Hirsh via CnC-List
> wrote:
>
> Congratulations!
> Its a beautiful boat and you can look forward to lots of fast races and
> comfortable cruising alike!
>
> Tracy Hirsh
> Ogopogo
> 1989 C&C 37+ CB
> Fairhope AL
>
Yes, 1994. I know that the factory burned that year and I wonder if it was
built before that or finished somewhere else.
Al Liles
SV Elendil
Victoria, BC
> On Feb 10, 2016, at 5:43 PM, Ken Heaton via CnC-List
> wrote:
>
> I also agree, great boat. Elindil is a 1994 I think? One of the n
Congratulations!
Its a beautiful boat and you can look forward to lots of fast races and
comfortable cruising alike!
Tracy Hirsh
Ogopogo
1989 C&C 37+ CB
Fairhope AL
___
Email address:
CnC-List@cnc-list.com
To change your list preferences, including unsu
Al,
Welcome to the list! And congratulations on the purchase of an amazing C&C (not
that I'm too biased.)
We are all here for you.
All the best,
Edd
---
Edd M. Schillay
Starship Enterprise
NCC-1701-B
C&C 37+ | City Island, NY
www.StarshipSailing.com
Congratulations and welcome to the club!
Andy
C&C 40
Peregrine
Andrew Burton
61 W Narragansett
Newport, RI
USA02840
http://sites.google.com/site/andrewburtonyachtservices/
+401 965-5260
> On Feb 10, 2016, at 20:43, Ken Heaton via CnC-List
> wrote:
>
> I also agree, great boat. Elindil
I also agree, great boat. Elindil is a 1994 I think? One of the newest
Canadian C&C's out there.
Congratulations.
Ken Heaton & Anne Tobin
S/V Salazar - Can 54955
C&C 37/40 XL - Hull # 67
Cape Breton Island, Nova Scotia
http://www.racethecape.ca/the-race/entrants/salazar/
On 10 February 2016 a
Congrats Al -- fair winds
Stu
___
Email address:
CnC-List@cnc-list.com
To change your list preferences, including unsubscribing -- go to the bottom of
page at:
http://cnc-list.com/mailman/listinfo/cnc-list_cnc-list.com
Al,
It's a great boat! Welcome.
Gary
S/V High Maintenance
'90 C&C 37+
East Greenwich, RI, USA
~~~_/)~~
On Wed, Feb 10, 2016 at 8:09 PM, Alan Liles via CnC-List <
cnc-list@cnc-list.com> wrote:
> The deal just closed. I'm the new owner of C&C 37/40+ Elendil out of
> Victoria.
>
> Ch
The deal just closed. I'm the new owner of C&C 37/40+ Elendil out of Victoria.
Cheers, Al
___
Email address:
CnC-List@cnc-list.com
To change your list preferences, including unsubscribing -- go to the bottom of
page at:
http://cnc-list.com/mailman/l
Welcome...
Tom Buscaglia
SV Alera
1990 C&C 37+/40
Vashon Island WA
(206) 463-9200
www.sv-alera.com
At 04:48 PM 2/1/2016, you wrote:
Message: 3
Date: Mon, 1 Feb 2016 14:40:40 -0800
From: Alan Liles
To: cnc-list@cnc-list.com
Subject: Stus-List Post to list
Message-ID: <905f1748-ea
Al,
Welcome to the list. You'll find this to be the most valuable resource in your
boat ownership.
Hope everything works out in the purchase of the 37+.
Fair winds! Let us know where you will be based.
All the best,
Edd
---
Edd M. Schillay
Starship Enterprise
N
Hi Al,
I'll be the first to ask "which 37+" as soon as you close the deal.
Great boat by the way...
Welcome aboard.
Ken H.
S/V Salazar - Can 54955
1990 C&C 37/40 XL - Hull # 67
Cape Breton Island, Nova Scotia
http://www.racethecape.ca/the-race/entrants/salazar/
On 1 February 2016 at 18:40, A
Al – welcome to the list and congrats on the new yacht.
We have hundreds of members who are just sitting back waiting for someone to
ask a question – so fire away.
Stu___
Email address:
CnC-List@cnc-list.com
To change your list preferences, including
Welcome to the list.
Josh Muckley
S/V Sea Hawk
1989 C&C 37+
Solomons, MD
On Feb 1, 2016 5:41 PM, "Alan Liles via CnC-List"
wrote:
> Hi all, I'm new to the list so I'll probably have a few screw ups. Anyway,
> I'm just finalizing a deal for a 37/40+ so I'll likely have a few questions
> arise.
>
Hi all, I'm new to the list so I'll probably have a few screw ups. Anyway, I'm
just finalizing a deal for a 37/40+ so I'll likely have a few questions arise.
Cheers, Al
___
Email address:
CnC-List@cnc-list.com
To change your list preferences, includ
lilesal...@gmail.com
Cheers, Al
___
Email address:
CnC-List@cnc-list.com
To change your list preferences, including unsubscribing -- go to the bottom of
page at:
http://cnc-list.com/mailman/listinfo/cnc-list_cnc-list.com
Mike Casey
via CnC-List
Sent: Monday, December 21, 2015 5:01 PM
To: cnc-list@cnc-list.com
Cc: Mike Casey
Subject: Stus-List Post to the list
Hi folks,
I bought a C&C 30 this past summer. I have been able to figure everything out
except the full cockpit enclosure. It is Sunbrella and c
Hi folks,
I bought a C&C 30 this past summer. I have been able to figure everything
out except the full cockpit enclosure. It is Sunbrella and comes in a small
bag. It attaches to the bimini, after the boom is clipped to the toe rail.
I can see where it goes back and there are slots for the twin b
I got mine from Paneltronics. The original lamps are actually neon bulbs, I
reused the little trim rings and glued the LED's in with clear silicone.
http://www.paneltronics.com/Electrical_Components.asp?op=Indicator-Lights
Jim Watts
Paradigm Shift
C&C 35 Mk III
Victoria, BC
On 6 November 2014 1
Essentra components. http://www.essentracomponents.com
Jerry. C&C 27 V J&J.
Sent from my iPhone
> On Nov 6, 2014, at 6:18 PM, Howard and Skippy via CnC-List
> wrote:
>
> Does anyone have a lead on where to get replacements for the little red
> lenses on the electrical panel of mid 80's C&C'
Because mine says "marine"! 😄
On Thursday, November 6, 2014, Edd Schillay wrote:
> Mine were a dollar less each :-)
>
> All the best,
>
> Edd
>
> ---
> Edd M. Schillay
> Starship Enterprise
> C&C 37+ | NCC-1701-B
> City Island, NY
> www.StarshipSailing.com
>
Mine were a dollar less each :-)
All the best,
Edd
---
Edd M. Schillay
Starship Enterprise
C&C 37+ | NCC-1701-B
City Island, NY
www.StarshipSailing.com
---
Sent from my iPad Air
iPad. iTypos. iApologize
> On Nov 6, 2014, at 8:21 PM, Joel
or these:
http://www.defender.com/category.jsp?path=-1%7C65136&id=2290033
Joel
On Thursday, November 6, 2014, Edd Schillay wrote:
> This may work for replacement LED's:
> http://m.delcity.net/store/LED-Indicator-Pigtail-Lights/p_800789
>
> Very pleased with Del City's other offerings and price
This may work for replacement LED's:
http://m.delcity.net/store/LED-Indicator-Pigtail-Lights/p_800789
Very pleased with Del City's other offerings and prices.
All the best,
Edd
---
Edd M. Schillay
Starship Enterprise
NCC-1701-B
C&C 37+ | City Island, NY
www.Starsh
I've found those white caps available at electrical wholesalers.
Brent
C&C 27-5
Sent from my iPhone
> On Nov 6, 2014, at 5:25 PM, Joel Aronson via CnC-List
> wrote:
>
> Howard,
>
> West sells the screw covers in white and ivory. Can't help with the LEDs,
> but I also need a few.
>
> Joel
Home improvement stores sell the screw caps. White and off white.
Bill Walker.
Sent from my HTC
- Reply message -
From: "Howard and Skippy via CnC-List"
To:
Subject: Stus-List post
Date: Thu, Nov 6, 2014 6:18 PM
Does anyone have a lead on where to get replacements for
Howard,
West sells the screw covers in white and ivory. Can't help with the LEDs,
but I also need a few.
Joel
On Thursday, November 6, 2014, Howard and Skippy via CnC-List <
cnc-list@cnc-list.com> wrote:
> Does anyone have a lead on where to get replacements for the little red
> lenses on the
Does anyone have a lead on where to get replacements for the little red
lenses on the electrical panel of mid 80's C&C's. Mine is an 84 35-3
and about 1/2 of the red caps are AWOL. I am also trying to track down
about 12 of the cream colored caps that go over the screw and clear
circular keep
ladoug...@whidbey.com
Just doing what the email conformation said to do.
Thanks
Larry
___
This List is provided by the C&C Photo Album
Email address:
CnC-List@cnc-list.com
To change your list preferences, including unsubscribing -- go bottom of page
46 matches
Mail list logo
