:02 AM
Subject: Re: Stus-List Whisker pole - 32
Thanks Mike
I am aware of that but it may not be the same rule in all PHRF
jurisdictions.therefore I suggested to just get the proper spin pole(carbon
fiber if you can afford it but even aluminium on a 32 foot boat is not too
heavy to
[mailto:cnc-list-boun...@cnc-list.com] On Behalf Of Hoyt,
Mike
Sent: April 7, 2014 9:40 AM
To: cnc-list@cnc-list.com
Subject: Re: Stus-List Whisker pole - 32
"The farther out you can project the clew the better"
Precisely why some areas impose limits of J. In PHRFNS a whisker pole and a
c-list.com
Subject: Re: Stus-List Whisker pole - 32
Tim
If you used a 20 foot whisker pole to get your 155 clew further out to
leeward do the rules state that the inboard end of the pole must be
attached at the mast? I have never found a beneficial (better speed)
use for a long whisker pole like
: cnc-list
Subject: Re: Stus-List Whisker pole - 32
Neil,
In my opinion you are mis-interpreting the YRALIR non-spinnaker
regulations.
The regulation is
1. Pole Length: Whisker poles may not be longer than "LP" without
penalty. Extendable poles must be banded to in
e common one.
Michael Brown
Windburn
C&C 30-1
Date: Fri, 4 Apr 2014 17:46:18 -0700 (PDT)
From: Don Harben
To: "cnc-list@cnc-list.com"
Subject: Re: Stus-List Whisker pole - 32
Message-ID:
<1396658778.47199.yahoomail...@web121903.mail.ne1.yahoo.com>
Content-Type: te
Don't know how your local racing is regulated, but a whisker pole more than 1.5
J is usually not allowed.
John McLaughlin
C&C29-2
"Falcon"
-Original Message-
From: Michael Brown
To: cnc-list
Sent: Fri, Apr 4, 2014 7:55 pm
Subject: Re: Stus-List Whisker pole -
ist@cnc-list.com
> *Sent:* Friday, April 4, 2014 7:11:40 PM
>
> *Subject:* Re: Stus-List Whisker pole - 32
>
> Usually the spinnaker launch goes well double handed.
> Takedown is more challenging, gybes are real interesting.
>
> NFS - Non Flying Sail - Whitesail
> FS - Flyi
lived to see
another day ...LOL
From: Michael Brown
To: cnc-list@cnc-list.com
Sent: Friday, April 4, 2014 7:11:40 PM
Subject: Re: Stus-List Whisker pole - 32
Usually the spinnaker launch goes well double handed.
Takedown is more challenging, gybes are real
During a very light wind race we may just sail straight at the mark and
try to set the sails out all the way, ie 90 degrees to the center line. To do
that I need a long whisker pole, 22' is a little short.
With a J of 13.50, a #1 foot of 22' I would need a 26' whisker pole for a
perfect "barn door
"cnc-list@cnc-list.com"
Subject: Re: Stus-List Whisker pole - 32
Message-ID:
Content-Type: text/plain; charset="iso-8859-1"
That's really generous of you Mike, thanks for the offer. It's just me and
my girlfriend so I don't think we're ready t
a crew
controlling the inboard end from near the shrouds.
_
From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of Tim
Goodyear
Sent: April 4, 2014 6:00 PM
To: cnc-list@cnc-list.com
Subject: Re: Stus-List Whisker pole - 32
BTW, ECSA (Eastern CT PHRF) has removed max
-FT.)/product_info.html#description
>
>
>
> *From:* CnC-List
> [mailto:cnc-list-boun...@cnc-list.com]
> *On Behalf Of *Stevan Plavsa
> *Sent:* Friday, April 04, 2014 1:14 PM
> *To:* cnc-list@cnc-list.com
> *Subject:* Stus-List Whisker pole - 32
>
>
>
> Ther
Stevan
> Plavsa
> Sent: Friday, April 04, 2014 1:14 PM
> To: cnc-list@cnc-list.com
> Subject: Stus-List Whisker pole - 32
>
> There's one for sale locally, 7' to 17' extension. I don't have one (but
> there are chocks/mounts on the deck for one). Is this
gt;>
To: "cnc-list@cnc-list.com <mailto:cnc-list@cnc-list.com>"
mailto:cnc-list@cnc-list.com>>
Subject: Re: Stus-List Whisker pole - 32
Message-ID:
<mailto:caddevn5ebva9ow1xprcexszmf91jv+jz-thgsuxvrzgsmbe...@mail
rtificate and show $2M insurance coverage.
>
> If you are getting brave I have a spinnaker I could loan you.
>
> Mike
>
>
> Date: Fri, 4 Apr 2014 14:51:44 -0400
> From: Stevan Plavsa
> To: "cnc-list@cnc-list.com"
> Subject: Re: Stus-List Whisker pole - 32
&g
t; certificate and show $2M insurance coverage.
>
> If you are getting brave I have a spinnaker I could loan you.
>
> Mike
>
>
> Date: Fri, 4 Apr 2014 14:51:44 -0400
> From: Stevan Plavsa
> To: "cnc-list@cnc-list.com"
> Subject: Re: Stus-List Whisker pole -
need a PHRF-LO
certificate and show $2M insurance coverage.
If you are getting brave I have a spinnaker I could loan you.
Mike
Date: Fri, 4 Apr 2014 14:51:44 -0400
From: Stevan Plavsa
To: "cnc-list@cnc-list.com"
Subject: Re: Stus-List Whisker pole - 32
Message-ID:
Content-Type:
..@cushwake.com> john.m...@cushwake.com
Bill Coleman
C&C 39
From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of Stevan
Plavsa
Sent: Friday, April 04, 2014 2:52 PM
To: cnc-list@cnc-list.com
Subject: Re: Stus-List Whisker pole - 32
Thanks Dwight. I haven't raced the
.@cnc-list.com] On Behalf Of Stevan
Plavsa
Sent: April 4, 2014 3:52 PM
To: cnc-list@cnc-list.com
Subject: Re: Stus-List Whisker pole - 32
Thanks Dwight. I haven't raced the boat yet (except for some fun races the
club hosts annually). The keelboat racing scene at our small club is
dwindlin
ference in SOG for
> your boat...it has for all of the C&C designs that I have sailed
>
>
> --
>
> *From:* CnC-List [mailto:cnc-list-boun...@cnc-list.com] *On Behalf Of *Stevan
> Plavsa
> *Sent:* April 4, 2014 3:29 PM
> *To:* cnc-list@cnc-l
iled
_
From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of Stevan
Plavsa
Sent: April 4, 2014 3:29 PM
To: cnc-list@cnc-list.com
Subject: Re: Stus-List Whisker pole - 32
I don't have a spinnaker.
:/
On Fri, Apr 4, 2014 at 2:24 PM, Rich Knowles wrote:
We all want our m
he full length of the 17 foot pole.
>>> Your J measurement is 12 feet or so, so a spinnaker pole at 12 feet,
>>> wouldn't get the jib out nearly as far.
>>>
>>> Hope that explains it.
>>>
>>> Gary
>>>
>>>
>>> - Orig
ker pole at 12 feet,
>>> wouldn't get the jib out nearly as far.
>>>
>>> Hope that explains it.
>>>
>>> Gary
>>>
>>>
>>> - Original Message -
>>> From: Stevan Plavsa
>>> To: cnc-list@cnc-lis
Steve,
You're lucky.just get a proper spinnaker pole for your boat and call it a
day
_
From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of Stevan
Plavsa
Sent: April 4, 2014 3:17 PM
To: cnc-list@cnc-list.com
Subject: Re: Stus-List Whisker pole - 32
Well, so muc
or so, so a spinnaker pole at 12 feet,
>> wouldn't get the jib out nearly as far.
>>
>> Hope that explains it.
>>
>> Gary
>>
>>
>> - Original Message -
>>
>> *From:* Stevan Plavsa
>> *To:* cnc-list@cnc-list.com
>> *
aker pole at 12 feet,
> wouldn't get the jib out nearly as far.
>
> Hope that explains it.
>
> Gary
>
>
> - Original Message -
>
> *From:* Stevan Plavsa
> *To:* cnc-list@cnc-list.com
> *Sent:* Friday, April 04, 2014 12:13 PM
> *Subject:* Stus-List Whisker
http://www.forespar.com/whisker2011.shtml#C_LIST
They don't list a C&C 32 but based on similar length boats looks like
Forespar would recommend 10-18 but 7-17 should work, especially if
you're using a No. 2. Looking at their prices, $100 is great buy if
it's in decent shape.
Also consider i
I would.
-Original Message-
From: Stevan Plavsa
Sent: 04/04/2014 12:14
To: cnc-list@cnc-list.com
Subject: Stus-List Whisker pole - 32
There's one for sale locally, 7' to 17' extension. I don't have one (but there
are chocks/mounts on the deck for one). Is this the
t explains it.
Gary
- Original Message -
From: Stevan Plavsa
To: cnc-list@cnc-list.com
Sent: Friday, April 04, 2014 12:13 PM
Subject: Stus-List Whisker pole - 32
There's one for sale locally, 7' to 17' extension. I don't have one (but
there are chocks/mounts
From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of William
Hall
Sent: April 4, 2014 1:32 PM
To: cnc-list
Subject: Re: Stus-List Whisker pole - 32
I agree, if that pole is usable, get it!
Here in Long Island Sound, the whisker pole PHRF reg is n
ker-Poles-&-Hardware/c232/p3070/FORESPAR-WHISKER-POLE-(TWISTLOCK-ADJ.-7-15-FT.)/product_info.html#description
>>
>>
>>
>> *From:* CnC-List [mailto:cnc-list-boun...@cnc-list.com] *On Behalf Of *Stevan
>> Plavsa
>> *Sent:* Friday, April 04, 2014 1:14 PM
>> *To:* cn
ril 4, 2014 1:32 PM
To: cnc-list
Subject: Re: Stus-List Whisker pole - 32
I agree, if that pole is usable, get it!
Here in Long Island Sound, the whisker pole PHRF reg is no longer than LP.
So if your jib is a 150%, LP is 1.5*J, quite a bit longer than J. Having
that extra length beyond J ma
nnacle.com/Whisker-Poles-&-Hardware/c232/p3070/FORESPAR-WHISKER-POLE-(TWISTLOCK-ADJ.-7-15-FT.)/product_info.html#description
>
>
>
> *From:* CnC-List [mailto:cnc-list-boun...@cnc-list.com] *On Behalf Of *Stevan
> Plavsa
> *Sent:* Friday, April 04, 2014 1:14 PM
> *To:* cnc-list@cnc-
5-FT.)/product_info.html#description
From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of
Stevan Plavsa
Sent: Friday, April 04, 2014 1:14 PM
To: cnc-list@cnc-list.com
Subject: Stus-List Whisker pole - 32
There's one for sale locally, 7' to 17' extension. I don't have o
Sounds about right! Yes, its a bargain if it is not a corroded mess.
Do you sail downwind a lot under main and jib or just jib? Do you have a
fitting on the mast to attach it to?
Joel
On Fri, Apr 4, 2014 at 12:13 PM, Stevan Plavsa wrote:
> There's one for sale locally, 7' to 17' extension. I
There's one for sale locally, 7' to 17' extension. I don't have one (but
there are chocks/mounts on the deck for one). Is this the right size for a
C&C 32? How does a person determine suitable length for a whisker pole?
Asking price is $100, this seems pretty cheap?? It's a forespar. Buy?!
Thanks,
36 matches
Mail list logo
