Wondering if anyone knows the size of Spreader Boots for a C&C 32.3"
or 4".the ones on now are falling apartthey are a cloth type
material but the new ones I will buy at the yacht shop are the standard
white rubber type. I would like to make one lift up the mast to
replace ASAP an
1:48 PM (GMT-05:00) To:
cnc-list@cnc-list.com Cc: Marek Dziedzic Subject: Re:
Stus-List Spreader boots.
Have you tried using rigging tape? It works quite well.
Marek
1994 C270 Legato
Ottawa, ON
From: Bill Coleman via CnC-List
Sent: Tuesday, June 11, 2019 12:50
To: cnc-list@cnc-list.co
;
> *From:* Bill Coleman via CnC-List
> *Sent:* Tuesday, June 11, 2019 12:50
> *To:* cnc-list@cnc-list.com
> *Cc:* Bill Coleman
> *Subject:* Re: Stus-List Spreader boots.
>
>
> It seems like I got some from a small Canadian site on EBay once, they
> were Clam-Style, White
Have you tried using rigging tape? It works quite well.
Marek
1994 C270 Legato
Ottawa, ON
From: Bill Coleman via CnC-List
Sent: Tuesday, June 11, 2019 12:50
To: cnc-list@cnc-list.com
Cc: Bill Coleman
Subject: Re: Stus-List Spreader boots.
It seems like I got some from a small Canadian site on
via CnC-List
Sent: Tuesday, June 11, 2019 12:20 PM
To: cnc-list@cnc-list.com
Cc: Daniel Cormier
Subject: Re: Stus-List Spreader boots.
Has anyone tried using fire hose or Something similar? I have triple
spreaders and some of mine have three holes and are needing replacement.
Dan Cormier
ble from Edson
>>
>> David F. Risch
>> 1981 40-2
>> Gulf Stream Associates
>> (401) 419-4650
>>
>> From: CnC-List On Behalf Of John McLaughlin
>> via CnC-List
>> Sent: Monday, June 10, 2019 2:05 PM
>> To: cnc-list@cnc-list.com
>>
ch
> 1981 40-2
> Gulf Stream Associates
> (401) 419-4650
>
> From: CnC-List On Behalf Of John McLaughlin
> via CnC-List
> Sent: Monday, June 10, 2019 2:05 PM
> To: cnc-list@cnc-list.com
> Cc: johnr...@aol.com
> Subject: Stus-List Spreader boots.
>
> I need
...@aol.com
Subject: Stus-List Spreader boots.
I need to get spreader boots for a C&C 29-2.
Not sure what size or type I should get or from whom to purchase.
John McLaughlin
Newburgh, NY
John McLaughlin
___
Thanks everyone for supporting this list
I need to get spreader boots for a C&C 29-2.
Not sure what size or type I should get or from whom to purchase.
John McLaughlin
Newburgh, NY
John McLaughlin
___
Thanks everyone for supporting this list with your contributions. Each and
every one
great help to see your installation. Didn't use it a
> lot this summer but it always worked well. Such a joy.
>
> Don Jonsson
> Swan Song (although currently in a name change process)
> C&C 34
> Victoria
>
>
>
> From: "Jim Watts"
> To: "
Jim Watts"
To: "1 CnC List"
Sent: Friday, October 27, 2017 11:08:48 AM
Subject: Re: Stus-List Spreader boots 1984 C&C 35-3
Finally got a quote from Blackline. Initial estimate was $5K, full quote was
$10K.
I'm not sure what Plan B is at this point, that's double
Finally got a quote from Blackline. Initial estimate was $5K, full quote
was $10K.
I'm not sure what Plan B is at this point, that's double what I have heard
from others who have done the switch from rod to wire.
Jim Watts
Paradigm Shift
C&C 35 Mk III
Victoria, BC
On 7 October 2017 at 18:11, Andr
] On Behalf Of Rick Brass
via CnC-List
Sent: Saturday, October 7, 2017 22:11
To: cnc-list@cnc-list.com
Cc: Rick Brass
Subject: Re: Stus-List Spreader boots 1984 C&C 35-3
Edson elkhide spreader boots are available at West Marine for about $70 per
pair, which is about twice the price of th
Edson elkhide spreader boots are available at West Marine for about $70 per
pair, which is about twice the price of the Taylor Made nylon boots. The boots
on my lower spreaders (where there is contact with the headsail) are elk hide.
The boots on the uppers (which are above the leach of the 135)
I would regard that as a bargain. I think the guys at Blackline are pretty
good, but expensive.
Jim Watts
Paradigm Shift
C&C 35 Mk III
Victoria, BC
On 7 October 2017 at 18:11, Andrew Burton via CnC-List <
cnc-list@cnc-list.com> wrote:
> I just did the rigging on Peregrine. The riggers were able
I just did the rigging on Peregrine. The riggers were able to re-head all but
the V2/D3, which had to be replaced because of aligning the top spreaders with
the bend in the rod. The cost was about $5k for literally the best guys in the
world to do it all.
Andy
C&C 40
Peregrine
Andrew Burton
61
Try Leitch and McBride, Jim. They should have some.
Tell Phil and Rick I said hi.
Andy
C&C 40
Peregrine
Andrew Burton
61 W Narragansett
Newport, RI
USA02840
http://sites.google.com/site/andrewburtonyachtservices/
+401 965-5260
> On Oct 7, 2017, at 20:39, Jim Watts via CnC-List
> wrote:
I'm having a rigger come out next week to have a look at our standing
rigging and mast, it's all original so I'm sure we'll end up with yet
another horrific bill. I'm seriously considering going to wire instead of
rod, but I'll get quotes on both
Andrew, you're right, I want to pull the mast so I
Especially if you intend to pull the rig, Jim, sewing elkhide boots on is
remarkably easy. I did that last year with mine and even though I though I made
a hash of the job, you wouldn't know it from the deck! Mind you, I did start
with the top set of spreaders first. It's a quick enough job that
Does anyone know offhand the sizes of the spreader tips on the early rig
(pre-1985)? I want to put on some spreader boots and having them ready to
go would make it much easier than having to go up and measure first.
Jim Watts
Paradigm Shift
C&C 35 Mk III
Victoria, BC
__
!
Jake
Jake Brodersen
C&C 35 Mk-III "Midnight Mistress"
Hampton VA
From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of Tom
Alessi via CnC-List
Sent: Wednesday, June 1, 2016 10:13
To: cnc-list@cnc-list.com
Cc: Tom Alessi
Subject: Stus-List Spreader B
I just use white electrical tape to cover the spreader tip pin and retainer. I
do pull my mast every year though.
Mike
Persuasion
C&C 37 K/CB
Long Sault
Sent from my iPad
> On Jun 1, 2016, at 11:12 AM, Tom Alessi via CnC-List
> wrote:
>
> Hello all,
> Any recommendations on spreader boots f
I expect that I'll hear quite a bit of push back but, I don't have spreader
boots and it has never caused me a problem. The sails have spreader
patches to prevent chaff. I resist spreader boots since they hold moisture
and can contribute to corrosion. They also prevent the rain from rinsing
out
Any 30 mkII owners know which sizes they used? Sm & Med or Med & Lrg boots.
Thanks!
On Wed, Jun 1, 2016 at 8:26 AM William Walker via CnC-List <
cnc-list@cnc-list.com> wrote:
> I don't know what brand you are considering. Last year I had Torreson
> Marine in Muskegon install new boots. They use
I don't know what brand you are considering. Last year I had Torreson Marine in Muskegon install new boots. They used Taylor Made, part numbers Tay 960027 and Tay 960026, large and medium. Medium for uppers, large for mowers. About 45 per pair.
Bill walker
Cnc 36
Pentwater, Mi
On Jun 1, 2016
I have to measure the circumference of the spreader ends, so I can decide
which to order.
Andy
C&C 40
Peregrine
On Wed, Jun 1, 2016 at 11:13 AM, Tom Alessi via CnC-List <
cnc-list@cnc-list.com> wrote:
> Are you going with "small" for the uppers and lowers?
>
> Tom
> 1980 C&C 36
> tagraph...@opto
Are you going with "small" for the uppers and lowers?
Tom
1980 C&C 36
tagraph...@optonline.net
___
This list is supported by the generous donations of our members. If you like
what we do, please help us pay for our costs by donating. All Contributions
Just about to order these myself:
http://www.jamestowndistributors.com/userportal/show_product.do?pid=51383&familyName=Edson+Leather+Spreader+Boot+Kits
Andy
C&C 40
Peregrine
On Wed, Jun 1, 2016 at 10:12 AM, Tom Alessi via CnC-List <
cnc-list@cnc-list.com> wrote:
> Hello all,
> Any recommendati
Hello all,
Any recommendations on spreader boots for a 1980 C&C 36 with upper and lower
spreaders?
Tom
S/V ANDIAMO
ROCKAWAY BEACH, NY
tagraph...@optonline.net
___
This list is supported by the generous donations of our members. If you like
what we do
29 matches
Mail list logo
