Don,
Nope. Collar floats with cabin roof. Mast has holes below the collar for
some sort of restraint but are not used.
The upward load is borne entirely by the mast since the turning blocks are
bolted to the mast. There is nothing attached to the collar at all.
Dennis C.
Touche' 35-1 #83
Mand
Dennis,
Isn't your collar restrained by collar brackets on either side of the
and thru bolted to the mast just below the cabin headliner? These
brackets transfer the load to the mast and not to cabin top.
Don Kern
Fireball, C&C35 Mk2
Bristol, RI
On 10/31/2022 3:54 PM, Dennis C. via CnC-List
I have something similar now, but possibly my blocks are too small. They are
from Garhauer but only have two screws in each one. The backing plates are
bending and I've replaced several of the screws with rivets.
I don't see your blocks or mine in their catalog so I'm probably looking in the
Bob,
The plate should be a collar. Not sure what you're trying to do, but if
you're adding halyard turning blocks, I strongly suggest you consider
attaching the turning blocks to the mast like this:
https://drive.google.com/file/d/0B_sb5TfIENvsdTZpUEFRcjZ1SEE/view?usp=drivesdk&resourcekey=0-Eczz
Delete from the end back to /18/ and it will take you to the correct
page. Or go to the home page, click "Shop" and go to page 18
From: Neil Andersen via CnC-List
Sent: Monday, October 31, 2022 3:22 PM
To: Stus-List
Cc: Neil Andersen
Subject: Stus-List Re: mast blocks
Bad link
Neil Andersen, W3NEA
Rock Hall, MD 21661
484-354-8800
From: Jeff Nelson via CnC-List
Sent: Monday, October 31, 2022 1:53:25 PM
To: cnc-list@cnc-list.com
Cc: Jeff Nelson
Subject: Stus-List Re: mast blocks
Like these:
https://www.garhauermarine.com/shop
Yes, like those! Thank you
Bob
> On 10/31/2022 1:53 PM Jeff Nelson via CnC-List
> wrote:
>
>
> Like these:
> https://www.garhauermarine.com/shop/page/18/?_categories=mast-plates
>
> On 2022-10-31 14:31, Bob Mann via CnC-List wrote:
>
> > > What is the plate
Like these:
https://www.garhauermarine.com/shop/page/18/?_categories=mast-plates
On 2022-10-31 14:31, Bob Mann via CnC-List wrote:
What is the plate called at the base of the mast that one attaches
turning blocks to? I need to add one to my 35-1. Does it attach to
the mast, deck, or deck coll
