ight also allow the single board (if it is indeed a
> single board!) to bend enough to fit the curves of the forward hull, both
> vertically and fore and aft.
>
> They might be separate boards but I only see bungs at the top and bottom of
> their vertical 'run'.
&g
Ignore the requests for a picture of a Foredeck Cow…
(Welcome!!)
From: Hans Reinhardt via CnC-List
Sent: Wednesday, February 3, 2021 4:22 PM
To: Stus-List
Cc: Hans Reinhardt
Subject: Stus-List Re: FW: Re: Interior 'walls'
Hi All,
First post here so I imagine I will have fouled
ardt via CnC-List
To: Stus-List
Cc: Hans Reinhardt
Sent: Wed, Feb 3, 2021 4:22 pm
Subject: Stus-List Re: FW: Re: Interior 'walls'
Hi All,First post here so I imagine I will have fouled up somehow ...
😱Hopefully I will continue to “contribute”, more meaningfully as time goes on.
The
ottom of
> their vertical 'run'.
>
> Charlie Nelson
> Water Phantom
>
>
>
> -Original Message-
> From: Robert Boyer via CnC-List
> To: Stus-List
> Cc: Robert Boyer
> Sent: Tue, Feb 2, 2021 1:49 pm
> Subject: Stus-List Re: FW: Re:
;.
Charlie NelsonWater Phantom
-Original Message-
From: Robert Boyer via CnC-List
To: Stus-List
Cc: Robert Boyer
Sent: Tue, Feb 2, 2021 1:49 pm
Subject: Stus-List Re: FW: Re: Interior 'walls'
It seems to me that the teak battens were initially glued to a fabric backing
with about 1/
t found a 'seam' yet so the panel may
> extend forward and be a single long panel--Murphy lurks!
>
> Thanks for the suggestions,
>
> Charlie Nelson
> Water Phantom
>
>
> -Original Message-
> From: Graham Collins via CnC-List
> To: Charlie N
raham Collins
Sent: Mon, Feb 1, 2021 9:21 pm
Subject: Stus-List Re: FW: Re: Interior 'walls'
Hey Charlie, if it is like the panels on my boat you should be able to get the
plugs out reasonably easily, I drilled a small hole in the center and screwed a
wood screw in, it popped the plug
Hey Charlie,
If it just has water stains, is there any way you could sand the damaged wood
where it is and just recoat it with Watco Teak Oil? It's worth a try. I've
cleaned stains off the teak cabinetry on my boat that way. I use a cleaner
like Pinesol first and then lightly sand with 120.
Hey Charlie, if it is like the panels on my boat you should be able to
get the plugs out reasonably easily, I drilled a small hole in the
center and screwed a wood screw in, it popped the plugs out and I could
remove the screws and thus the panel. I'd go with that before resorting
to a power t
Thanks all who have chimed in with thoughts on my 'ceiling' problem.
I spoke with Rob at South Shore today and he recalled that C&C sourced this
material to a local shop who has since gone out of business.
My next, probably last hope, is Noah Boatworks in Ontario per one of the
listers. They do
nc-list.com>>
*Sent:* January-31-21 11:25 PM
*To:* cnc-list@cnc-list.com <mailto:cnc-list@cnc-list.com>
*Cc:* cenel...@aol.com <mailto:cenel...@aol.com>
*Subject:* Stus-List Re: FW: Re: Interior 'walls'
Thanks Rod--you obviously know your nauti
> *To:* Rod Stright ; 'Stus-List' <
> cnc-list@cnc-list.com>
> *Cc:* cenelson
> *Subject:* Stus-List Re: FW: Re: Interior 'walls'
>
>
>
> Thank you.
>
>
>
> I was hoping that I might find a source for this material, perhaps
> from som
ist.com
Cc: cenel...@aol.com
Subject: Stus-List Re: FW: Re: Interior 'walls'
Thanks Rod--you obviously know your nautical terms, as do some others on this
list. Now a few more listers, including myself, know what to call this
'planking'.
With that out of the way, ba
Maybe South Shore?
From: cenelson via CnC-List
Sent: February-01-21 10:08 AM
To: Rod Stright ; 'Stus-List'
Cc: cenelson
Subject: Stus-List Re: FW: Re: Interior 'walls'
Thank you.
I was hoping that I might find a source for this material, perhaps from someone
ake them out and refinish if required. I tried to attach/enclose a picture
but the site doesn’t seem to allow it to go through.
Rod
From: Charlie Nelson via CnC-List
Sent: January-31-21 11:25 PM
To: cnc-list@cnc-list.com
Cc: cenel...@aol.com
Subject: Stus-List Re: FW: Re: Interio
Thanks Rod--you obviously know your nautical terms, as do some others on this
list. Now a few more listers, including myself, know what to call this
'planking'.
With that out of the way, back to draining the swamp! To wit: some of this
'ceiling' in my V berth on my 1995 C&C 36 XL/kcb has bee
16 matches
Mail list logo
