Power<http://aka.ms/weboutlook>
Invictus
C&C 30 MK1
Fredericton, NB
From: CnC-List on behalf of Robert Boyer via
CnC-List
Sent: Thursday, January 10, 2019 12:46 PM
To: Frederick G Street
Cc: Robert Boyer; cnc-list@cnc-list.com
Subject: Re: Stus-List Propane
Yes, I forgot that it was also a requirement. Marinetics is the name of the
solenoid manufacturer that uses aluminum and stainless steel for construction.
It costs more than Trident but well worth it in my opinion.
Bob
Bob Boyer
S/V Rainy Days (1983 C&C Landfall 38 - Hull #230)
Blog: dainyray
Bob — actually, using two separate hoses is a requirement; it’s not safe to
have any “taps” or tees outside of the propane locker, so all hoses must split
after the solenoid in the locker and be continuous runs to the end point.
— Fred
Fred Street -- Minneapolis
S/V Oceanis (1979 C&C Landfall 3
Personally, I would use two separate hoses for the devices, both led from the
solenoid. The Trident solenoid is cheap and rusts quickly—I prefer the made by
(I can’t think of the name right now) but it is made of aluminum and stainless
steel. There is a lot of condensation that is created in a
Cc: sender
Subject: Re: Stus-List Propane hose
The size of gas piping is based on an allowable pressure drop. The regulator
should be adjusted to deliver at 11" of water column (approx 0.4psi). For
propane appliances the allowable drop is 1". The Canadian residential gas code
I have h
r due to the size of the fittings, just a bit of a PITA,
>>
>>
>> Tom Power <http://aka.ms/weboutlook>
>> Invictus
>> C&C 30 MK1
>> Fredericton, NB
>> --
>> *From:* CnC-List on behalf of
>> svrebeccaleah via
on, NB
> --
> *From:* CnC-List on behalf of
> svrebeccaleah via CnC-List
> *Sent:* Wednesday, January 9, 2019 4:06 PM
> *To:* cnc-list@cnc-list.com
> *Cc:* svrebeccaleah
> *Subject:* Re: Stus-List Propane hose
>
> Hi Tom,
> This from West Marin
9, 2019 4:55 PM
To: cnc-list@cnc-list.com
Cc: Frederick G Street
Subject: Re: Stus-List Propane hose
Tom — I had hoses made up when I added my Dickinson fireplace years ago; I’m
pretty sure everything was 1/4” ID with 3/8” flare fittings. I’ve got the
usual three-burner range with over in the
> C&C 30 MK1
> Fredericton, NB
> From: CnC-List <mailto:cnc-list-boun...@cnc-list.com>> on behalf of svrebeccaleah via
> CnC-List mailto:cnc-list@cnc-list.com>>
> Sent: Wednesday, January 9, 2019 4:06 PM
> To: cnc-list@cnc-list.com <mailto:cnc-list@cnc-list.c
;http://aka.ms/weboutlook>
Invictus
C&C 30 MK1
Fredericton, NB
From: CnC-List on behalf of svrebeccaleah via
CnC-List
Sent: Wednesday, January 9, 2019 4:06 PM
To: cnc-list@cnc-list.com
Cc: svrebeccaleah
Subject: Re: Stus-List Propane hose
Hi Tom,
This fr
) To:
cnc-list@cnc-list.com Cc: T power Subject: Stus-List
Propane hose
Hi Everyone, I have a propane question. I'm installing a Dickinson
Mediterranean stove with oven and a Dickinson P9000 propane heater.
The hose needed for the stove is 12 feet, the hose needed for the hea
I can't say for sure but I don't think you'll have a problem with 1/4". I
lot of campers/trailers us 1/4 copper tubing for the distribution from the
tank. Stoves, ovens, refrigerators, and heaters are all part of that
system.
If you're making the connections/fittings I think a major considerati
Hi Everyone, I have a propane question. I'm installing a Dickinson
Mediterranean stove with oven and a Dickinson P9000 propane heater.
The hose needed for the stove is 12 feet, the hose needed for the heater is 21
feet.
My question is will I have enough flow (volume) if I use 1/4 id hose verses
13 matches
Mail list logo
