@cnc-list.com
Cc: Bill Coleman
Subject: Re: Stus-List Older C&C Bow Navigational lights
It would help if you said how old. If it is as old as mine, wing it , give
it some thought and I am sure you can do better, those were kind of home -
made. I mean where they have a green plastic cover
Older model side lights are probably either deck horizontal mount Perko 963
or the in hull side lights. Replacements for the in hull lights are made
by either Sea Dog or Whitecap.
I just had to drill out the bow casting and install heli coils for Touche's
Perko 963 side lights.
Dennis C.
On Mon
re *C&C 25 mk1
Washington, NC
*From:*CnC-List [mailto:cnc-list-boun...@cnc-list.com] *On Behalf Of
*Bill Coleman via CnC-List
*Sent:* Monday, May 16, 2016 9:27 PM
*To:* cnc-list@cnc-list.com
*Cc:* Bill Coleman
*Subject:* Re: Stus-List Older C&C Bow Navigational lights
It would help if yo
Cc: Bill Coleman
Subject: Re: Stus-List Older C&C Bow Navigational lights
It would help if you said how old. If it is as old as mine, wing it , give
it some thought and I am sure you can do better, those were kind of home -
made. I mean where they have a green plastic cover screwed to th
Tornado. But I
will have to say, that teardrop look, looks kind of sharp
Bill Coleman
Original message
From: Andrew Deveau via CnC-List
Date: 5/16/2016 7:25 PM (GMT-05:00)
To: cnc-list@cnc-list.com
Cc: Andrew Deveau
Subject: Stus-List Older C&C Bow Navigati
Jeff & Andrew...I replaced all of my Nav lights with Hella NaviLED-pro Pro
lights. Crystal clear bezel, relatively easy direct replacement, completely
sealed, 2m leas wire. Bright and similar to existing lights. Slightly
largerI had ss backing plates cut then drilled/tapped mount
do you have the tear drop lighrs? I have some I removed I would give you.
Sent from AOL Mobile Mail
On Monday, May 16, 2016 Andrew Deveau via CnC-List
wrote:
Would anyone have any options for bow navigational lights on an older C&C
25.
I had one of the lights burn-out on the bow. I'n my at
You can actually get Perko lights as a direct replacement. However, you
are going to have to drill out the broken screws
which isn't going to be fun...as otherwise the degrees of light will not
be correct.
I've been thinking of replacements for my C&C 30, but haven't come up
with a good option
Would anyone have any options for bow navigational lights on an older C&C
25.
I had one of the lights burn-out on the bow. I'n my attempt to remove the
light I was successful in remove one of three screws and managed to break
the other two light.
Would anyone have any thoughts or ideas on, and o
