ter
2012 Mystic Seaport Rendezvous Attendee
--- On Tue, 9/25/12, Rich Knowles wrote:
From: Rich Knowles
Subject: Re: Stus-List Lifelines and Stanchions
To: "cnc-list@cnc-list.com"
Date: Tuesday, September 25, 2012, 10:41 AM
Alex, I also have had bare stainless since 1998. No problems at
Of Richard Walter
Sent: Tuesday, September 25, 2012 12:28 PM
To: cnc-list@cnc-list.com
Subject: Re: Stus-List Lifelines and Stanchions (bare wire)
Greetings,
I too am planning to replace my lifelines. As I understand, the reason
for non-coated lifelines is so that they are easier to inspect, wear
On Behalf Of Richard Walter
Sent: Tuesday, September 25, 2012 11:28 AM
To: cnc-list@cnc-list.com
Subject: Re: Stus-List Lifelines and Stanchions (bare wire)
Greetings,
I too am planning to replace my lifelines. As I understand, the reason for
non-coated lifelines is so that they are easier
zvous Attendee
--- On Tue, 9/25/12, Rich Knowles wrote:
From: Rich Knowles
Subject: Re: Stus-List Lifelines and Stanchions
To: "cnc-list@cnc-list.com"
Date: Tuesday, September 25, 2012, 10:41 AM
Alex, I also have had bare stainless since 1998. No problems at all
Rich Knowles
Indigo. L
email: a...@airsensing.com
WEB: www.airsensing.com
Message: 10
Date: Tue, 25 Sep 2012 12:18:13 +
From: Wally Bryant
To: cnc-list@cnc-list.com
Subject: Re: Stus-List Lifelines and Stanchions
Message-ID: <5061a105.8060...@wbryant.com>
Content-Type: text/plain; charset=ISO-8859-1; format=
: Re: Stus-List Lifelines and Stanchions
Message-ID: <5061a105.8060...@wbryant.com>
Content-Type: text/plain; charset=ISO-8859-1; format=flowed
I've been running bare wire through my stanchions since 2005 with no
noticeable chafe problem.
Wal
Alex wrote:
> do I need to worry ab
I've been running bare wire through my stanchions since 2005 with no
noticeable chafe problem.
Wal
Alex wrote:
do I need to worry about chafing on the stanchion itself, as the wire would
have the same hardness.
--
s/v Stella Blue
www.wbryant.com
_
rounded loops are just loops of webbing. The grommets were there. I
don't know where you can buy them. Sorry!
Joel
Sent from my iPad
On Sep 24, 2012, at 8:58 PM, Alex Giannelia wrote:
> Joel
>
> Thanks, but what are "rounded loops"? And where did you get the nylon
> grommets?
>
>
>
> ALEX G
Joel
Thanks, but what are "rounded loops"? And where did you get the nylon grommets?
ALEX GIANNELIA
CC 35-II (1974) WILL BE RENAMED
ON THE HARD SINCE NOV. 2006
Toronto Ontario
___
This List is provided by the C&C Photo Album
http://www.cncphotoalbu
.@cnc-list.com [mailto:cnc-list-boun...@cnc-list.com]
On Behalf Of Alex Giannelia
Sent: Monday, September 24, 2012 12:39 PM
To: cnc-list@cnc-list.com
Subject: Stus-List Lifelines and Stanchions
Hello All.
My deck project has evolved enough so that I can contemplate re-installing
the stanchions and
inal Message-
From: cnc-list-boun...@cnc-list.com [mailto:cnc-list-boun...@cnc-list.com]
On Behalf Of Alex Giannelia
Sent: Monday, September 24, 2012 12:39 PM
To: cnc-list@cnc-list.com
Subject: Stus-List Lifelines and Stanchions
Hello All.
My deck project has evolved enough so that I
Alex,
Cool! The uppers on my boat run through rounded loops. The lowers have
nylon grommets.
Joel
35/3
On Mon, Sep 24, 2012 at 12:38 PM, Alex Giannelia wrote:
> Hello All.
>
> My deck project has evolved enough so that I can contemplate re-installing
> the stanchions and lifelines. I want to
Hello All.
My deck project has evolved enough so that I can contemplate re-installing the
stanchions and lifelines. I want to use uncoated stainless wire, so the
obvious question is, do I need to worry about chafing on the stanchion itself,
as the wire would have the same hardness. Are there
13 matches
Mail list logo
