Check for a firmware update for the radio. Jerry
-Original Message-
From: John McKay via CnC-List
To: cnc-list
Cc: John McKay
Sent: Thu, May 25, 2017 10:16 am
Subject: Re: Stus-List Garmin GNX 20 now ICom 506
I originated this issue.
Remove the ICOM radio from my network and
6:12 PM
To: cnc-list@cnc-list.com
Cc: Jerome Tauber
Subject: Re: Stus-List Garmin GNX 20 From a cruising forum.
So my partner contacted ICOM UK, who said that despite what is printed in the
manual,the Icom M506 does not support obtaining a GPS position over NMEA 2000.
The menu option to select an
enna was connected. There are no 0183 devices left on Perception.
>
> Get Outlook for iOS
> From: CnC-List on behalf of Jerome Tauber via
> CnC-List
> Sent: Tuesday, May 23, 2017 3:56:12 PM
> To: cnc-list@cnc-list.com
> Cc: Jerome Tauber
> Subject: Re: Stus-List Garmin G
.
Get Outlook for iOS<https://aka.ms/o0ukef>
From: CnC-List on behalf of Jerome Tauber via
CnC-List
Sent: Tuesday, May 23, 2017 3:56:12 PM
To: cnc-list@cnc-list.com
Cc: Jerome Tauber
Subject: Re: Stus-List Garmin GNX 20
>From a cruising forum.
So m
?
Chuck Gilchrest
S/V Half Magic
1983 35 Landfall
Padanaram, MA
From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of Jerome
Tauber via CnC-List
Sent: Tuesday, May 23, 2017 3:56 PM
To: cnc-list@cnc-list.com
Cc: Jerome Tauber
Subject: Re: Stus-List Garmin GNX 20
>Fro
evice, but at this time it is not.
Jerry
-Original Message-
From: John McKay via CnC-List
To: cnc-list
Cc: John McKay
Sent: Tue, May 23, 2017 9:02 am
Subject: Re: Stus-List Garmin GNX 20
I believe my network is set up properly. I have given Garmin a schematic of
everything o
Previously, you said Garmin suggested that the radio might be the
problem. Until you remove it from the circuit and observe that the
display still locks up without it being present, then you do not know
if they are correct or not. Conjecture and assumptions will likely not
fix the problem. :-)
I believe my network is set up properly. I have given Garmin a schematic of
everything on it and they have not suggested changes.
I failed to say in my original question that I have a GMI 20 display right next
(T's attached to each other) to the GNX 20 display and the GMI 20 works
flawlessly. I
Is your N2K network properly terminated? Another thing to check.
Fred Street -- Minneapolis
S/V Oceanis (1979 C&C Landfall 38) -- Bayfield, WI
> On May 23, 2017, at 7:26 AM, Pete Shelquist via CnC-List
> wrote:
>
> John –
>
> Also check the voltage at the unit. Pin-out of the cable is ava
: Stus-List Garmin GNX 20
Have you determined that the display still locks up with that Radio out of the
circuit? That seems like a logical first step.
Bill Bina
On 5/22/2017 10:37 PM, John McKay via CnC-List wrote:
I bought a Garmin wind instrument package a year ago and one of the
Have you determined that the display still locks up with that Radio out
of the circuit? That seems like a logical first step.
Bill Bina
On 5/22/2017 10:37 PM, John McKay via CnC-List wrote:
I bought a Garmin wind instrument package a year ago and one of the
displays is a GNX 20.
The display
I bought a Garmin wind instrument package a year ago and one of the displays is
a GNX 20.
The display lock continuously. The on/off button does not work. I have to
disconnect the power.
Garmin says this display works flawlessly. They are trying to tell me the
problems is because I have an ICOM
12 matches
Mail list logo
