Chuck, I have a swivel block with a cleat, it’s worked well for 10 years so
far. Not sure who made it but there is a small switch to disable the ratchet.
Still 2 feet of ice at the docks here, 3 ice breakers have tried to open the
bay without success. Happy spring!
Len Mitchell
Crazy Legs
37+
Mi
PM
To: cnc-list@cnc-list.com
Cc: Chuck Saur
Subject: Stus-List Furling line cleating
Happy spring!!?? Ice shanty or two (with trucks) still on Hessel Bay!!
I have been searching for a new way to cleat my furling line. Currently have
just a 'horned' cleat mounted on the coaming si
Chuck,
I have exactly the setup you describe.
It’s on my 26 - a smaller boat, but works flawlessly and was such an
improvement from the old horned cleat.
sam
C&C 26 Liquorice
Ghost Lake Alberta
On Thursday, April 11, 2019, 4:14:14 PM EDT, Chuck Saur via CnC-List
wrote:
Happy spring!!??
My line comes into an integral farelead/camcleat. I think that the unit
was designed for a larger size line since the farelead looks capable of
1/2" or even 9/16" and the 3/8ths that I use works loose of the cam cleat.
In heavy winds and a furled sail it can come loose quickly and
dangerously. I
Earlier this year we were out on the Gulf and a friend of mine suggested a
single line clutch. I found one at our local boat salvage. Due to the way our
cockpit is designed, I get a pretty straight pull through it to the turning
block at the base of the stanchion, and if I ever really had to (
boun...@cnc-list.com] On Behalf Of Chuck Saur
via CnC-List
Sent: Thursday, April 11, 2019 4:13 PM
To: cnc-list@cnc-list.com
Cc: Chuck Saur
Subject: Stus-List Furling line cleating
Happy spring!!?? Ice shanty or two (with trucks) still on Hessel Bay!!
I have been searching for a new way to clea
On my 34R I installed a Harken Size 1 and the kit came with a rachet block on
the pushpit stanchion and the line is directed toward a secondary winch but run
through a Harken Cam Cleat mounted on the coaming.
Chuck S
> On April 11, 2019 at 4:13 PM Chuck Saur via CnC-List
> wrote:
>
>
Happy spring!!?? Ice shanty or two (with trucks) still on Hessel Bay!!
I have been searching for a new way to cleat my furling line. Currently
have just a 'horned' cleat mounted on the coaming sidewall. I have been
looking at Harken's 'flip-flop' (pivoting) block mounted to deck with
integral ca
