Boatless
Leamington, Ontario
From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of John
Christopher via CnC-List
Sent: December-08-17 10:04
To: Dennis C.
Cc: John Christopher; CnClist
Subject: Re: Stus-List Engine idle speed
Hi,
I’ve been scouring thru information
Send Westerbeke an e-mail; they have answered questions about my engine in the
past.
From: Marek Dziedzic via CnC-List
Sent: Friday, December 08, 2017 10:03 AM
To: cnc-list@cnc-list.com
Cc: Marek Dziedzic
Subject: Re: Stus-List Engine idle speed
I would imagine around 800-900 rpm. As someone
: Dennis C. via CnC-List
Sent: Friday, December 8, 2017 09:57
To: CnClist
Cc: Dennis C.
Subject: Re: Stus-List Engine idle speed
On a side note, I'm looking out at an inch or so of SNOW here in south
Louisiana this morning. What the heck? Very, very unusual.
Dennis C.
Touche' 35-1 #83
>>> I don’t know.
>>>
>>> Bill Coleman
>>> C&C 39 Erie, PA
>>>
>>> From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of David
>>> Knecht via CnC-List
>>> Sent: Thursday, December 07, 2017 7:44 AM
>&
Knecht via CnC-List
Sent: Friday, December 8, 2017 09:38
To: CnC CnC discussion list
Cc: David Knecht
Subject: Re: Stus-List Engine idle speed
I have a device for measuring the rpm at the engine so I plan to do that when I
adjust, but I can’t find anywhere in the service or owners manual what the
Dennis — feel free to send it our way; we have the cold, but not much snow…
On the other hand, now you don’t need to go all the way to Colorado for your
ski trips this winter. :^)
— Fred
Fred Street -- Minneapolis
S/V Oceanis (1979 C&C Landfall 38) -- on the hard in Bayfield, WI :^(
> On D
Bill Coleman
> C&C 39 Erie, PA
>
> *From:* CnC-List [mailto:cnc-list-boun...@cnc-list.com
> ] *On Behalf Of *David Knecht via CnC-List
> *Sent:* Thursday, December 07, 2017 7:44 AM
> *To:* CnC CnC discussion list
> *Cc:* David Knecht
> *Subject:* Stus-List Engine idle speed
this, I don’t
> know.
>
> Bill Coleman
> C&C 39 Erie, PA
>
> From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of David
> Knecht via CnC-List
> Sent: Thursday, December 07, 2017 7:44 AM
> To: CnC CnC discussion list
> Cc: David Knecht
> Subject: Stus-
, I don’t know.
Bill Coleman
C&C 39 Erie, PAanimated_favicon1
From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of David Knecht
via CnC-List
Sent: Thursday, December 07, 2017 7:44 AM
To: CnC CnC discussion list
Cc: David Knecht
Subject: Stus-List Engine idle speed
Agreed that 1000 RPM at idle does not sound right.
From: David Knecht via CnC-List
Sent: Thursday, December 07, 2017 7:44 AM
To: CnC CnC discussion list
Cc: David Knecht
Subject: Stus-List Engine idle speed
All this discussion of engine (Universal M4-30) starting has reminded me of
something
David:
I have a Yanmar 2GMF.where the throttle cable meets the engine,
there is an screw/bolt that can be easily adjusted to set the 'minimum
idle speed'..I have mine set about 800 RPM's so I can not adjust the
throttle to run the engine below 800 RPM's.
I don't have the same issue a
First, don't believe your tachometer. You said your engine idles at 1000
rpm. Your engine may actually be idling at a lower speed. I check and
adjust my 25XPB tachometer with a laser tachometer.
Second, adjust the idle at the engine, not the pedestal. You should find 2
cables on the side of th
: David Knecht
Subject: Stus-List Engine idle speed
All this discussion of engine (Universal M4-30) starting has reminded me of
something I want to do in the spring, but am not sure how to approach. My
engine runs fine at idle, which is around 1000rpm (don’t remember exactly what
gauge reads). If
All this discussion of engine (Universal M4-30) starting has reminded me of
something I want to do in the spring, but am not sure how to approach. My
engine runs fine at idle, which is around 1000rpm (don’t remember exactly what
gauge reads). If I shift into reverse it almost always stalls. I
14 matches
Mail list logo
