Re: Stus-List C&C 32 - toerail bolts

From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of Shawn Wright via CnC-List Sent: Sunday, May 31, 2020 10:36 PM To: cnc-list@cnc-list.com Cc: Shawn Wright Subject: Re: Stus-List C&C 32 - toerail bolts Interesting about the 5/16 on the 30-1. My 35-2 are definitely 1/4

Re: Stus-List C&C 32 - toerail bolts

Interesting about the 5/16 on the 30-1. My 35-2 are definitely 1/4", oval head philips machine screws, and the 2" length sounds correct. -- Shawn Wright shawngwri...@gmail.com S/V Callisto, 1974 C&C 35 https://www.facebook.com/SVCallisto ___ Thanks ever

Re: Stus-List C&C 32 - toerail bolts

To: cnc-list@cnc-list.com Cc: Adam Johnson Subject: Stus-List C&C 32 - toerail bolts Hello all, I am currently stuck in lock down a long way from where my new to me C&C 32 is moored hence seeking information to plan out some spring jobs when I can finally get back. Leaking toe ra

Re: Stus-List C&C 32 - toerail bolts (Dave Godwin)

Dave - many thanks for checking. The hunt for hardware continues! Adam. ___ Thanks everyone for supporting this list with your contributions. Each and every one is greatly appreciated. If you want to support the list - use PayPal to send contributio

Re: Stus-List C&C 32 - toerail bolts

Adam, Confirmed. Toe-rail bolts for a 1982 C&C 37’ are 1/4”-20. Regards, Dave Godwin 1982 C&C 37 - Ronin Reedville - Chesapeake Bay Ronin’s Overdue Refit > On May 30, 2020, at 10:58 AM, Dave Godwin via CnC-List > wrote: > > Adam, > > I’m 99.999% certain th

Re: Stus-List C&C 32 - toerail bolts

Adam, I’m 99.999% certain that you will find that your toenail is bolted down using 1/4-20 Phillips Oval Head (machine) screws. Length dependent on your hull/deck joint. IN the U.S. I buy them in bulk from McMaster-Carr. Much cheaper that way. When I was in Melbourne last I didn’t run across an

Stus-List C&C 32 - toerail bolts

Adam: I don't know the size of your toe rail bolts...I have never fully removed one but I have tightened some slightly, careful not to over tighten and squeeze out the butyl.   It is a two (2) person job done properlyone person on deck holding the bolt in place with the screw driver, the

Stus-List C&C 32 - toerail bolts

Hello all, I am currently stuck in lock down a long way from where my new to me C&C 32 is moored hence seeking information to plan out some spring jobs when I can finally get back. Leaking toe rail bolts from midships to stern on both sides, many showing heavy corrosion. Will attempt tightening ho