Brian, looking at the photos, it appears you have the shaft removed? If so, all
you have to do now is carefully score the old bearing 90% of the way through
with a hacksaw and then bend the bearing inward with a punch. Once loosened, it
should come out. I did this job a couple of years ago with
Did you try to find pipe? I've seen pictures of pipe cut lengthwise to fit
around the shaft, held on with hose clamps, and then pressed out with
strong backs and all-thread.
Josh
On Feb 26, 2016 2:09 PM, "Brian Fry via CnC-List"
wrote:
> It appears that it is not going to work.
> I was using Co
It appears that it is not going to work.
I was using Conduit PVC, and it is just not strong enough to take the
forces involved.
I'll probably try again, this time using socket werenches, if I can find on
big enough.
--
Brian Fry
S/V La Neige
1993 C&C 37/40XL
HdG Maryland
___
Unfortunately I haven't had the chance to try it yet. Maybe tomorrow or
Thursday.
> Message: 4
> Date: Tue, 23 Feb 2016 17:11:26 -0500
> From: Josh Muckley
> To: "C&C List"
> Subject: Re: Stus-List Bearing removal tool by MacGy
Did it work?
Josh Muckley
S/V Sea Hawk
1989 C&C 37+
Solomons, MD
On Feb 23, 2016 1:00 PM, "Brian Fry via CnC-List"
wrote:
> Here's a link to the solution I came up with
>
> https://m.facebook.com/The-Next-14-Years-1011224262273851/
>
> Brian
> La Neige
> 37/40 xl 1993
> Havre de Grace
>
> __
Here's a link to the solution I came up with
https://m.facebook.com/The-Next-14-Years-1011224262273851/
Brian
La Neige
37/40 xl 1993
Havre de Grace
___
Email address:
CnC-List@cnc-list.com
To change your list preferences, including unsubscribing -- go
